A Look Inside The Super Nintendo Cartridges And Video System

July 31, 2024 by 22 Comments

Despite being effectively sold as a toy in the 1990s, the Super Nintendo Entertainment System (SNES) was pretty bleeding-edge as far its computing chops were concerned. This was especially apparent with its cartridges, such as in this excellent summary article by [Fabien Sanglard].

In addition to the mask ROM that stored the game data and (optionally) battery-backed SRAM to store save data, a wide range of enhancement processors existed that upgraded the base SNES system with additional processors for more CPU performance, enhanced graphics and so on. Imagine sticking a game cartridge in a PlayStation 4 today that boosted CPU speed by 5x and gave it a much better GPU, this was the world of SNES games.

On the other side of the video game cartridges was the video output system, which seems easy enough in today’s world of digital HDMI and DisplayPort output. In the 90s video output did however mean NTSC and SECAM/PAL, which means playing nice with frequencies, different resolutions (lines) and squeezing as much as possible into a single frame in a way that works with the game console’s rendering pipeline. As a result of this the PAL version of Super Mario World has a larger vertical resolution than the NTSC version (240 vs 224 lines), even if it’s still squashed into the same 4:3 format. For the physical video output side, European gamers were spoiled with an AV connector to (RGB) SCART output, while the rest of the world dealt with some variety of RF composite or S-video.

Although the SNES’s successor in the form of the N64 would not take cartridges to the same extremes, it was this flexible architecture that gave the SNES such an amazing game library.

The Boxy All-In-One Nintendo 64 Your 1990s Self Always Wanted

December 15, 2019 by 16 Comments

In 1997, chances are that if you didn’t have a Nintendo 64 already, you wanted one. (Never mind that the games cost the GDP of a small country.) It gave you both the supreme game designing talent of Shigeru Miyamoto and graphics that left the Sony behind. The trouble, though, was that like all consoles, the N64 required a large TV set and a load of wires. There was never a compact all-in-one version that integrated console, display, and speakers in the same package, and that was something [Mason Stooksbury] evidently considered to be a shame. A couple of decades late, he’s created the all-in-one Nintendo 64 appliance that the games giant never made in the ’90s, and we’re lucky enough to be able to take a look at it.

The starting point for the build is entirely in-period, the shell of a late-1990s Compaq CRT monitor. In the front goes a laptop display panel with a monitor conversion board, leaving plenty of space behind for a pair of full-size speakers. On top of the speakers sits a bare N64, with the controller ports brought out to the front panel below the screen. It’s not all retro though, there is also an HDMI converter and an HDMI output to drive a modern TV if desired. The N64 itself has an interesting backstory, it was his original console from back in the day that died following a lightning strike, and he brought it back to life decades later after some research revealed that the N64 PSU has a fuse.

Would an all in one ’64 have sold like hot cakes in ’97? Probably, and we’d be featuring all sorts of hacks on them today. As it is, portable N64s seem to feature most often here.

Hackaday Links Column Banner

Hackaday Links: October 23, 2016

October 23, 2016 by 18 Comments

It’s the Hack ‘O Lantern edition! First up, Slic3r is about to get awesome. Second, Halloween is just around the corner, and that means a few Hackaday-branded pumpkins are already carved. Here’s a few of them, from [Mike] and [yeltrow]:

The latest edition of PoC||GTFO has been released. Holds Stones From The Ivory Tower, But Only As Ballast (PDF and steganography warning). This edition has a reverse engineering of Atari’s Star Raiders, [Micah Elisabeth Scott]’s recent efforts on USB glitching and Wacom tablets, info on the LoRa PHY, and other good stuff. Thanks go to Pastor Manul Laphroaig.

Oh cool, we can be outraged about something. The Freetronics Experimenters Kit is a neat little Arduino-based ‘Getting Started In Microcontrollers’ kit. This kit was sold by Jaycar. Recently, Jaycar ripped off the kit and sold it under the Duiniotech name. The box was copied, the instruction manual was copied, and there’s a lot of IP being violated here. Can Freetronix do anything? Legally, yes, but it’s not worth it.

[Oscar] broke his phone, but it still works great as an SMD soldering camera/microscope thing.

Pobody’s Nerfect in Australia so here’s a 3D printed didgeridoo. What’s a didgeridoo? It’s an ancient instrument only slightly less annoying than bagpipes. It’s just a tube, really, and easily manufactured on any 3D printer. The real trick is the technique that requires circular breathing. That’s a little harder to master than throwing some Gcode at a printer.

[Chris Downing] is the master of mashed up, condensed, and handheld game consoles. His latest is another N64 portable, and it’s a masterpiece. It incorporates full multiplayer capability, uses an HDMI connector for charging and to connect the external breakout box/battery, and has RCA output for full-size TV gameplay. Of note is the breakout board for the custom N64 chip that puts pads for the memory card and a controller on a tiny board.