Hackaday Podcast

347 Articles

Hackaday Podcast 108: Eulogizing Daft Punk Helmets, Bitcoin Feeling The Heat, Squeezing Soft Robots, And Motorizing Ice Skates

March 5, 2021 by 2 Comments

Hackaday editors Elliot Williams and Mike Szczys travel through the greatest hacks the week had on offer. Charge up your ice skates (literally) by adding spiked electric motors to push you across the frozen pond. If that’s too cold for early March, snuggle up with a good book under the warm light of a clever lamp made from a rotary-dial telephone. We discuss CAD and CAM in your browser, and a software tool to merge images with PCB gerber files. The episode wraps up with a discussion on the balance of quality versus speed when prototyping, and digesting the environmental impact of the Bitcoin network.

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (~60 MB)

Places to follow Hackaday podcasts:

Continue reading “Hackaday Podcast 108: Eulogizing Daft Punk Helmets, Bitcoin Feeling The Heat, Squeezing Soft Robots, And Motorizing Ice Skates” →

Hackaday Podcast 107: FTDI Plays Music, LED Dimming Ain’t Easy, Measuring Poop Calories, And Sketchy Laser Cutters

February 26, 2021 by No comments

Hackaday editors Mike Szczys and Elliot Williams gab about all of the geeky things. We had a delightful time watching NASA bring Perseverance down to the Red planet. In Kristina’s words, we pour one out for Fry’s Electronics. And then we jump into a parade of excellent hacks with a magnetic bearing for crooked ball screws, a science-based poop-burning experiment, and the music hack only microcontroller enthusiasts could love as an FTDI cable is plugged directly into a speaker. Smart circuit design is used to hack a dimmer into non-dimmable LED fixtures, and an octet of living clams are the early warning sensors for water pollution.

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (~60 MB)

Places to follow Hackaday podcasts:

Continue reading “Hackaday Podcast 107: FTDI Plays Music, LED Dimming Ain’t Easy, Measuring Poop Calories, And Sketchy Laser Cutters” →

Hackaday Podcast 106: Connector Kerfuffle, Tuning Fork Time, Spinach Contact Prints, And Tesla’s Permanent Memory

February 19, 2021 by 1 Comment

Hackaday editors Elliot Williams and Mike Szczys recount the coolest hacks from the past week. Most clocks keep time with a quartz crystal, but we discuss one that uses a tuning fork… like the kind you use to tune a piano. Ghidra is a powerful reverse engineering tool developed by the NSA that was recently put to good use changing an embedded thermometer display from Celsius to Fahrenheit. We talk turkey on the Texas power grid problems and Tesla’s eMMC failures. And of course there’s some room for nostalgia as we walk down memory lane with the BASIC programming language.

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (~60 MB)

Places to follow Hackaday podcasts:

Continue reading “Hackaday Podcast 106: Connector Kerfuffle, Tuning Fork Time, Spinach Contact Prints, And Tesla’s Permanent Memory” →

Hackaday Podcast 105: 486 Doom On FPGA, How Thick Is Your Filament, Raspberry Pi Speaks Android Auto, And We’re Headed To Mars

February 12, 2021 by 3 Comments

Hackaday editors Mike Szczys and Elliot Williams unpack great hacks of the past week. We loves seeing the TIL311 — a retro display in a DIP package — exquisitely recreated with SMD electronics and resin casting. You might never need to continuously measure the diameter of your 3D printer filament, but just in case there’s a clever hall-effect sensor mechanism for that. Both of us admire the work being done in the FPGA realm and this week we saw a RISC-V core plumbed into quite the FPGA stack to run a version of Doom originally played on 486 computers. And we’re getting excited for the three ring circus of engineering acrobatics that will land NASA’s Perseverance rover on the surface of Mars next week.

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (~60 MB)

Places to follow Hackaday podcasts:

Continue reading “Hackaday Podcast 105: 486 Doom On FPGA, How Thick Is Your Filament, Raspberry Pi Speaks Android Auto, And We’re Headed To Mars” →

Hackaday Podcast 104: Delicous AI, DVD Scanning Microscope, And Battery-Friendly Microcontroller Designs

February 5, 2021 by 5 Comments

Hackaday editors Elliot Williams and Mike Szczys spin the wheel of hardware hacking brilliance. We’re enamored with the quest for a root shell on a Nissan Xterra infotainment system, and smitten with a scanning microscope that uses a laser beam and precision positioning from DVD drives. We speculate on the future of artificial intelligence in the culinary arts. And this week turned up a clever way to monitor utility usage while only changing the battery on your sensor once per year.

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (~65 MB)

Places to follow Hackaday podcasts:

Continue reading “Hackaday Podcast 104: Delicous AI, DVD Scanning Microscope, And Battery-Friendly Microcontroller Designs” →

Hackaday Podcast 103: Antennas For Everyone, A Clock Made Of Chains, Magic Eye Tubes, And A Little Google Bashing

January 29, 2021 by 2 Comments

Hackaday editors Mike Szczys and  Elliot Williams discuss the greatest hacks of the week that was. Antennas aren’t rocket science, so this week we really enjoyed a video that demystifies antenna designs and a project that tunes up the antennas on cheap wireless modules in the simplest of ways. Google’s in the news this week with the end to project Loon, and a dust-up with the volunteer package maintainers who have spent years making sure Chromium browser is in the Linux repos. Elliot is gaga for magic eye tubes and crazy musical instruments, while Mike is over the moon for a chain-based clock display. We close up the episode talking about the Concorde, and the math behind cable mechanisms.

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (~65 MB)

Places to follow Hackaday podcasts:

Continue reading “Hackaday Podcast 103: Antennas For Everyone, A Clock Made Of Chains, Magic Eye Tubes, And A Little Google Bashing” →

Hackaday Podcast 102: Raspberry Pi Microcontroller, Microphone Killswitch, And A 45-Degree 3D-Printer

January 22, 2021 by 2 Comments

Hackaday editors Elliot Williams and Mike Szczys sift through a week of excellent hacks. Big news is of course the Raspberry Pi microcontroller which Elliot had a few weeks to play around with on the bench before the announcement — it has some fascinating programmable modules (PIO) built in! Philips designed an LED light bulb that under-drives the LEDs for efficiency and long life. And Amazon added a nice little hardware disable circuit for the microphone in the Echo Flex — a rather extreme teardown shows how they did it. Plus we talk about an open source long-range RC protocol, wall-sized pen plotter art, and a 3D printer that angles the nozzle to avoid needing support.

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (~65 MB)

Places to follow Hackaday podcasts:

Continue reading “Hackaday Podcast 102: Raspberry Pi Microcontroller, Microphone Killswitch, And A 45-Degree 3D-Printer” →