SiFive Introduces RISC-V Linux-Capable Multicore Processor

Slowly but surely, RISC-V, the Open Source architecture for everything from microcontrollers to server CPUs is making inroads in the community. Now SiFive, the major company behind putting RISC-V chips into actual silicon, is releasing a chip that’s even more powerful. At FOSDEM this weekend, SiFive announced the release of a Linux-capable Single Board Computer built around the RISC-V ISA. It’s called the HiFive Unleashed, and it’s the first piece of silicon capable or running Linux on a RISC-V core.

SiFive’s HiFive Unleashed

The HiFive Unleashed is built around the Freedom U540 SOC, a quad-core processor built on a 28nm process. The chip itself boasts four U54 RV64GC cores with an additional E51 RV64IMAC management core. This chip has support for 64-bit DDR4 with ECC and a single Gigabit Ethernet port. Those specs are just the chip though, and you’ll really need a complete system for a single board computer. This is the HiFive Unleashed, a board sporting the Freedom U540, 8GB of DDR4 with ECC, 32MB of Quad SPI Flash, Gigabit Ethernet, and a microSD card slot for storage. If you don’t mind being slightly inaccurate while describing this to a technological youngling, you could say this is comparable to a Raspberry Pi but with a completely Open Source architecture.

News of this caliber can’t come without some disappointment though, and in this case it’s that the HiFive Unleashed will ship this summer and cost $999. Yes, compared to a Raspberry Pi or BeagleBone that is an extremely high price, but it has to be borne in mind that this is a custom chip and low-volume silicon on a 28nm process. Until a router or phone manufacturer picks up a RISC-V chip for some commodity equipment, this architecture will be expensive.

This announcement of a full Single Board Computer comes just months after the announcement of the SOC itself. Already, GCC support works, Linux stuff is going upstream, and the entire Open Source community seems reasonably enthusiastic about RISC-V. It’ll be great to see where this goes in the coming years, and when we can get Linux-capable RISC-V chips for less than a kilobuck.

39 thoughts on “SiFive Introduces RISC-V Linux-Capable Multicore Processor

  1. It’ll be great to see where this goes in the coming years, and when we can get Linux-capable RISC-V chips for less than a kilobuck.

    You and me both. I have a debit card, its limit is AU$999.99. I’ll bet the $999 figure is USD. The only ways I could buy this is by telegraphic wire transfer (been there, done that) or bitcoin.

    1. You can typically overpay a card in order to be and to me bigger payments with it. I did it to buy a laptop once: put 600$ on the card with a 0 balance the but the 1600$ laptop even if the card’s limit is 1000$.

      1. I tried that making parts purchases, and it didn’t work at all. It helped with multi-day purchasing, but the card would not allow more value in pending transactions than the credit limit. I called the card people up, and they said I could not “superinflate” my card, and acted like I was trying to do something shady. WTF.

    2. ‘telegraphic wire transfer’ Really? You mean ‘wire transfer’ or ‘bank transfer’, which I read in the US and such can take days or weeks, whereas in the eurozone you just press a button on your electronic bank system and it’s there in no time (day or two tops?), and no fee either in most cases. I shudder to think how long such a transaction takes from AU to US and how much they charge you for doing a basic thing.

      1. It was from my bank (Suncorp) to a bank in China. “Telegraphic wire transfer” was what was written on the form that I filled out at the bank branch, and involved requiring SWIFT codes and lots of other details of the recipient. I think the process cost about AU$30 or so.

        This is different to “electronic funds transfer” where all you need is the BSB, account number and account name… and yes, I do the latter variety all the time.

  2. From the picture it looks like its build like a tank. Just the color and layout I think makes it look very rugged.
    But I guess at that price I don’t think so. I will have to wait and play with my little CPUs and MPUs.

    1. Judging from the DIP switches up the top, the array of SMA sockets all wired up to clock lines and the small header down the bottom left for power measurements, this is not a home hobby development board.

      This is what dev boards often used to cost years ago… hideously expensive unless you’re a business.

      Hopefully, as interest picks up, demand for that SoC will go up and the unit cost down. With that, we should see some more reasonably priced hobby boards.

  3. “Until a router or phone manufacturer picks up a RISC-V chip for some commodity equipment, this architecture will be expensive.”

    Someone like WD could use the U540 SoC as a mass storage controller.

        1. “During an announcement at the recent seventh-annual RISC-V Workshop in San Jose, Calif, Martin Fink, CTO of Western Digital stressed this move isn’t about cost saving or building a new product pipeline for Western Digital, but about innovation and creating an Internet of Things (IoT) ecosystem that can both support the massive storage needs of Big Data while also facilitating Fast Data – delivering Big Data as quickly and as efficiently as possible.”

          You can almost sense the fear of “but no one will like me and come to my parties if I admit it’s all about the money”. RISC-V is a nice thing, but at the end of the day it’s still a processor.

      1. I saw a WD network drive on sale and it had the warning that it uses non-standard drives.
        Would be pretty sad if WD uses this to mess up the standard SATA or M2 interfaces and such, just to be annoying.

  4. Sifive are not releasing the designs anymore. So yeah, it may be riscV based but story of the instruction set aside, it’s no different than your regular ARM processor or your 80xx based micro.
    They’re also not trying to sell computers, they want to design (and fab?) chips for customers.

    1. yes, the price tag is way too high to suggest they want hobbyists to ever buy one, this looks like very low volume purchases by business customers, kind of like a demonstration unit, the price will probably never come down.

        1. The price will go down only if it takes off, demands must go up and fabrication must increase in efficiency. It’s got the open source thing going for it, so this will be a plus for people still concerned with the latest processor insecurities, maybe. They may not be targeting the average piddler, but maybe some larger groups more concerned about total control over security that off the shelf operating systems and hardware do not supply.
          It would nice if a comparison of, say, some linux code running on it verses an off the shelf processor. Maybe there is, I didn’t look into details of this once I saw price tag and linux.

        2. The thing is though that once you made the mold and set up the whole design for said 28nm then you MUST try to sell a lot to cover the setup cost right? So you should go as low as possible.
          Plus each wafer has to be filled, so you need to sell all of those chips per wafer produced (the ones that work)
          It’s not like you can only make 10 chips.
          Hell even with designing and ordering PCB’s it’s cheaper to buy a certain minimum amount.

  5. Since Marvell released the sheevaplug and openRD – and abandoned the projects –
    Someone is pushing really hard for SATA to stay away from these tiny systems. Those were the only embeddef systems with a decent way to store stuff. Back to our days and latest embedded tech available. No more SATA on board? No SCSI? No IDE? Not even PERTEC? Just USB? [CENSORED]!!!!!!!!!!!!!

  6. While the architecture seems to be very modular and capable, sadly I think that this will remain out of the reach of hobbyists for some time until someone comes around to sell the actual silicon…

    Sifive seems to only want to further the architecture itself, which is absolutely fantastic and should of course continue, but I am waiting for a company to come out after Sifive and intend to sell the actual chips…
    Then the silicon will become common enough to design into products, which will increase demand and feed the development cycle of improvement, new features, lower power, etc…

    I also worry that there will be a lot of competition from the various people behind ARM as this looks to be aiming squarely at their market share…
    It is safe to say that I will be grabbing popcorn in a year or two to watch when this speeds up a bit.

  7. The first revisions of a chip of that complexity is going to be so buggy it would be suicide to release a hobbyist board. In a year or so it’ll be ready for general consumption, after the worst bugs have ironed out both from the hardware and operating system support.

  8. Most of the comments here seem a bit short sighted.
    This board clearly not meant as a development board for use in developing projects.
    This board is designed as a development board for debugging the processor architecrute and getting it to run any software reliably.
    Look at the big power measurement connector.
    The other connectors are probably also not meant as “general I/O” such as all the mini boards hobbyists are used to, but probably more a convenient place to add a logic analyser to debug the board furter.
    Prices can and will only go down with mass production.

Leave a Reply to nilad Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s