Day: July 3, 2025

Back To The Future, 40 Years Old, Looks Like The Past

July 3, 2025 by 81 Comments

Great Scott! If my calculations are correct, when this baby hits 88 miles per hour, you’re gonna see some serious shit. — Doc Brown

On this day, forty years ago, July 3rd, 1985 the movie Back to the Future was released. While not as fundamental as Hackers or realistic as Sneakers, this movie worked its way into our pantheon. We thought it would be appropriate to commemorate this element of hacker culture on this day, its forty year anniversary.

If you just never got around to watching it, or if it has been a few decades since you did, then you might not recall that the movie is set in two periods. It opens in 1985 and then goes back to 1955. Most of the movie is set in 1955 with Marty trying to get back to 1985 — “back to the future”. The movie celebrates the advanced technology and fashions of 1985 and is all about how silly the technology and fashions of 1955 are as compared with the advancements of 1985. But now it’s the far future, the year 2025, and we thought we might take a look at some of the technology that was enchanting in 1985 but that turned out to be obsolete in “the future”, forty years on. Continue reading “Back To The Future, 40 Years Old, Looks Like The Past” →

It’s 2025, And We Still Need IPv4! What Happens When We Lose It?

July 3, 2025 by 78 Comments

Some time last year, a weird thing happened in the hackerspace where this is being written. The Internet was up, and was blisteringly fast as always, but only a few websites worked. What was up? Fortunately with more than one high-end networking specialist on hand it was quickly established that we had a problem with our gateway’s handling of IPv4 addresses, and normal service was restored. But what happens if you’re not a hackerspace with access to the dodgy piece of infrastructure and you’re left with only IPv6? [James McMurray] had this happen, and has written up how he fixed it.

His answer came in using a Wireguard tunnel to his VPS, and NAT mapping the IPv4 space into a section of IPv6 space. The write-up goes into extensive detail on the process should you need to follow his example, but for us there’s perhaps more interest in why here in 2025, the loss of IPv4 is still something that comes with the loss of half the Internet. As of this writing, that even includes Hackaday itself. If we had the magic means to talk to ourselves from a couple of decades ago our younger selves would probably be shocked by this.

Perhaps the answer lies in the inescapable conclusion that IPv6 answers an address space problem of concern to many in technical spaces, it neither solves anything of concern to most internet users, nor is worth the switch for so much infrastructure when mitigations such as NAT make the IPv4 address space problem less of a problem. Will we ever entirely lose IP4? We’d appreciate your views in the comments. For readers anxious for more it’s something we looked at last year.

Reliving VHS Memories With NFC And ESPHome

July 3, 2025 by 10 Comments

Like many of us of a certain vintage, [Dillan Stock] at The Stock Pot is nostalgic for VHS tapes. It’s not so much the fuzzy picture or the tracking issues we miss, but the physical experience the physical medium brought to movie night. To recreate that magic, [Dillan] made a Modern VHS with NFC and ESPHome.

NFC tags are contained in handsomely designed 3D printed cartridges. You can tell [Dillan] put quite a bit of thought into the industrial design of these: there’s something delightfully Atari-like about them, but they have the correct aspect ratio to hold a miniaturized movie poster as a label. They’re designed to print in two pieces (no plastic wasted on supports) and snap together without glue. The printed reader is equally well thought out, with print-in-place springs for that all important analog clunk.

Electronically, the reader is almost as simple as the cartridge: it holds the NFC reader board and an ESP32. This is very similar to NFC-based audio players we’ve featured before, but it differs in the programming. Here, the ESP32 does nothing related directly to playing media: it is simply programmed to forward the NFC tag id to ESPHome. Based on that tag ID, ESPHome can turn on the TV, cue the appropriate media from a Plex server (or elsewhere), or do… well, literally anything. It’s ESPHome; if you wanted to make this and have a cartridge to start your coffee maker, you could.

If this tickles your nostalgia bone, [Dillan] has links to all the code, 3D files and even the label templates on his site. If you’re not sold yet, check out the video below and you might just change your mind. We’ve seen hacks from The Stock Pot before, everything from a rebuilt lamp to an elegant downspout and a universal remote.

Continue reading “Reliving VHS Memories With NFC And ESPHome” →