An ARM Powered Business Card, Part Two

November 24, 2013 by 39 Comments

Card

While most microcontroller powered business cards opt for something small and cheap, [Brian] is going in an entirely different direction. His business card features an ARM processor, some Flash storage, a USB connection, and enough peripherals to do some really cool stuff.

This is the second iteration of [Brian]’s business card. We saw the first version, but this new version makes up for a few mistakes in the previous version. The biggest improvement is the replacement of the Molex USB plug with bare traces on the board. [Brian] couldn’t find a board house that could fab a board with the proper thickness for a USB plug, but a few strips of masking tape did enough to beef up the thickness and make his plug nice and snug. Also, the earlier version had a few pins sticking out of the board for programming purposes. This wasn’t an idea solution for a business card where it would be carried around in a pocket, so these pins were replaced with a connectorless programming adapter. Just a few exposed pads gives [Brian] all the programming abilities of the last version, without all those prickly pins to catch on clothing.

With his new business card, [Brian] has an excellent display of his engineering prowess and a very cool toy; he has a project that will turn this card into a keyboard emulator, randomly activating the Caps Lock button for a few seconds every few minutes. A great prank, and a great board to give to future employers.

Business Card Draws [ch00f]’s Logo

March 27, 2013 by 23 Comments

[ch00f] is at it again, expanding the horizons of the art of PCB business cards. This one draws his logo on any computer over a USB port.

The physical design of the card is heavily inspired by [Frank Zhao]’s card; both use an ATtiny85 and the V-USB package to handle the USB protocol and communications. Instead of typing words into a text editor like [Frank]’s, [ch00f]’s card draws the ch00ftech logo in MS Paint or other image editor.

There was a problem with simply emulating the mouse to draw a logo on the screen, though; because different computers have different mouse settings for acceleration, the ch00ftech logo was nearly always distorted. [ch00f] fixed that by emulating an absolute input device, basically turning his business card into a single-function pen tablet.

The logo was traced by hand and put into a few arrays in the firmware. Surprisingly, the logo didn’t take up much space – only 4k of the tiny85’s flash is used. There’s a lot more space for a more complicated drawing, but for now the simple ch00ftech logo (video after the break) will do.

Continue reading “Business Card Draws [ch00f]’s Logo” →

Capacitive Touch Business Card

November 4, 2012 by 15 Comments

[Jay Kickliter] sent in his latest electronic business card. This time, his goal was to make it much cheaper so he could actually afford to give it away. He did pretty well considering the two week timeline he mentions. This card is using an MSP430 with the capsense library to light up some LEDs any time the card is handled. While he states that it is much cheaper than his last, it is still around $8 a card, so he won’t be tossing these into everyone’s hands.  He does point out though that it is always helpful to have hardware to show off at a hardware interview, and an electronic business card does that job very well.

As usual, you can read more details and download the files at his blog.

[Limpkin’s] New Business Card

October 4, 2012 by 10 Comments

[Limpkin] decided to give the whole embedded business card thing a try. Here is his finished project, a low-profile mass storage business card that doesn’t cost an arm and a leg. Sure, the $6 price tag could score him a hundred paper cards, but those don’t light up like this one does!

The main components on the card include an AVR microcontroller, a flash memory chip, and an ESD protection chip. The latter is to make sure a static shock on the USB connector doesn’t zap the MCU. Speaking of, he went with an AT90USB162 which runs from an external 8 Mhz oscillator. Sure, it’s not the fastest thing out there, but since there’s only 16 Mb of flash on this card we don’t think you’ll notice any data transfer delay. The processor is running the LUFA stack and has two flavors of firmware. One that enumerates as an HID keyboard to automatically use keyboard shortcuts to launch a browser and load up his website. The other implements a mass storage device.

If you don’t like the electronic route, you could always go with some laser cut metal. We’ve heard that [Kevin Mitnick’s] business card has snap-out lock picking tools kind of like these.

USB Business Card Packs An ARM Processor

August 24, 2012 by 25 Comments

Over on the Hackaday forums, [Brian] introduced himself by showing off his new business card. Given his expertise is creating unique circuit boards, we can’t imagine a better way to show off his skills than an ARM-powered business card.

[Brian] posted a more detailed write-up on his blog that covers his development process. He decided to use a 48-pin LPC1343 ARM Cortex M3 as a USB Mass Storage Class device. All the heavy lifting for instantiating a USB storage device is handled by the microcontroller, so all [Brian] had to do was wire up a Flash memory chip and access it over an SPI interface.

The finished business card functions just like a USB thumb drive with a whopping 1 Megabyte of storage. That’s not a lot of storage, but it has more than enough room for [Brian]’s resume, a link to his website, and the full source code for his card.

The Many Iterations Of [Joe’s] PCB Business Card

July 18, 2012 by 8 Comments

[Joe Colosimo] is putting on a show with his PCB business card project. The idea isn’t new, but his goal is to keep it simple and undercut the cost of all other PCB cards he’s seen. This is the third generation of the board design, and he’s just waiting on some solder mask solution before he tries running it through the reflow oven.

The first two prototypes used some through-hole parts. Notably, the battery was to be positioned in a circular cut-out and held in place by a metal strap and some bare wires. But he couldn’t quite get it to work right so this design will transition to a surface-mount strap for one side, and the large circular pad for the other. At each corner of the board there is a footprint for an LED. He tried milling holes in the board to edge-light the substrate. Now he just mounts the LED upside down to give the board a blue glow. The LEDs are driven by an ATtiny10 microcontroller which takes input from the touch sensor array at the bottom right.

He etched a QR code on the board which seems to work better than the milled QR experiments we saw back in April. The link at the top point’s to [Joe’s] main page on the card. Don’t forget to follow the links at the bottom which cover each part of the development more in-depth.

[Thanks Skitchin]

555 Business Card

June 8, 2012 by 34 Comments

After checking out a few beautiful business cards while working at his engineering co-op, [Cody] realized he would soon need his own. Instead of a card with subtle off-white coloring, a tasteful thickness to it, and even a watermark, [Cody] decided to make a 555 timer business card.

[Cody] started his business card project by going through a few design iterations while figuring out what he wanted his business card to do. There were a few designs not chosen – one with a microcontroller, a few with just LEDs, and some with no circuitry at all. After checking out a few project from the EEV blog 555 contest, [Cody] decided to go with a simple 555 timer circuit.

Being a business card, [Cody] kept the circuit very simple; it’s just a 555, phototransistor, and a few SMD LEDs. When a 9 Volt battery is placed on the contact points of the card, the 555 lights up the LEDs. When a laser is shone on the phototransistor, the LEDs start blinking. A very neat and sufficiently interactive circuit that is perfect for keeping component costs down.

After the break you can check out [Cody]’s business card in action.

Continue reading “555 Business Card” →