[Ben Heck] Builds His Smallest 360 Laptop Ever

October 24, 2012 by 39 Comments

[Ben Heck] is no stranger to building Xbox 360 laptops. Over the years he’s built dozens, but for this week’s episode of The Ben Heck Show he’s throwing down the gauntlet and building the smallest Xbox laptop ever.

The latest and greatest Xbox laptop build is based around the newest and smallest  $199 4 Gig Xbox. A few compromises had to be made to turn this console into a laptop, though: The power that would have gone to a Kinect was repurposed to power the very thin 15.6″ LED LCD, while the port that would power a hard drive was used to drive a perfboard stereo amplifier. You can check out the official [Ben Heck] blog post here.

The final build is extremely compact and much smaller than [Ben Heck]’s previous Xbox laptop builds. At just 2.125″ thick and 16 ” wide and 9 ” long, it’s quite possibly the smallest Xbox that’s possible to build. Without a new hardware revision from Microsoft (which seems unlikely at this point), this is probably the smallest an Xbox 360 laptop can be. We tip our hat to [Ben], and wish him luck in the next season of The Ben Heck Show.

Ps3 Laptop Courtesy Of Ben Heck

October 21, 2009 by 16 Comments

ps3s_hero1

[Ben Heck] may be the coolest person ever (take that [Adam Savage]). You would think that after producing so many laptop versions of gaming consoles he would grow tired or we would be bored of them. But no! We love each and every new production – including his latest laptop-ified Ps3. Not too much in the terms of ‘new’ comes from his latest article, but it does reaffirm some things including: why make what you can buy, cheap foam sheet should be purchased by the ton, and use the screws from an overheated Xbox 360 when you lose the Ps3 originals. Oh, and [Adam] we were just kidding, you know we will always love you. Check out a video after the break.

[Via Ps3Mods]

Continue reading “Ps3 Laptop Courtesy Of Ben Heck” →

Ben Heck’s Xbox 360 Laptop Mk II

April 17, 2007 by 17 Comments


I’ve known this was coming for a while. [Ben]’s been working hard on this for a while. He’s built his second Xbox 360 laptop. But this time he’s putting up a three part How-To series on building it for engadget. Here’s a nice gallery of hi-res project pics. As usual, I’ll let you know when they’re posted. Aside from the new color scheme, this one features six fans instead of water cooling – so it should be easier for the how-to reader to construct their own.

Ben Heck’s Wii Laptop On Engadget

January 19, 2007 by 21 Comments


[Ben Heckendorn] put together this little beauty on engadget. It’s not quite as over the top as the XBox 360 laptop, but there’s a reason for that. He’ll be putting up a How-To series covering the construction. If you’ve been pondering building a portable yourself, it’ll be a nice jump start for your hardware hacking skill-base.

Ben Heck’s Atari 800 Laptop

December 16, 2006 by 7 Comments

Ben’s been working on this one forever. This new version 2 Atari 800 laptop features a CF drive, a RS lcd, original Atari hardware and lots and lots of friggin soldering. That keyboard is hand wired, along with the CF adapter. Unlike the xbox 360 laptop, this one’s got Ni-MH batteries that are good for about an hour of play.

Laptop Motherboard? Let’s Boot And Tinker

March 7, 2023 by 12 Comments

Last time, I’ve shared my experience on why you might want to consider a laptop motherboard for a project of yours, and noted some things you might want to keep in mind if buying one for a project. Now, let’s go through the practical considerations!

Making It Boot

Usually, when you plug some RAM and a charger into a board, then press the power button, your board should boot up and eventually show the BIOS on the screen. However, there will be some caveats – it’s very firmware-dependent. Let me walk you through some confusing situations you might encounter.

If the board was unpowered for a while, first boot might take longer – or it might power on immediately after a charger has been plugged in, and then, possibly, power off. A bit of erratic behaviour is okay, since boards might need to do memory training, or recover after having lost some CMOS settings. Speaking of those, some boards will not boot without a CMOS battery attached, and some will go through the usual ‘settings lost’ sequence. Sometimes, the battery will be on a daughterboard, other times, especially with new boards, there will be no CR2032 in sight and the board will rely on the main battery to provide CMOS settings saving functions – in such case, if you don’t use the battery, expect the first boot to take longer, at least. Overall, however, pressing the power switch will cause the board to boot. Continue reading “Laptop Motherboard? Let’s Boot And Tinker” →