Dive Computer Interface Hacking


Dive computers help divers keep an eye on bottom time and calculate nitrogen saturation during dives. Many of them, like the Suunto above have a built in provision for downloading dive data post dive. [CIBDiving] figured out a way to enable this missing feature on one of Suunto’s cheaper computers. The Gekko has the same pins as the more expensive units, but Suunto’s download manager won’t allow you to download the data. By using a simple software patch, [CIBDiving] tricked the software into pulling down the data.

You can buy a cable to pull down the data, or you can build your own serial or USB level shifting interface.

Automatic Color Detection


[KLOZ] submitted his final project from college. Rather than an expensive CCD camera, he used a set of colored resistors LEDs and a light dependent resistor (I’m assuming he means a photo resistor) to determine the color of a product (m&ms). He used the carriage from an old HP inkjet, a custom cnc cut wheel to separate and deliver the m&ms and a Parallax propeller micro controller board to tie it all together. Now he can hog all the green ones for himself.

Update: Yes, I’m an idiot. I did mean colored LEDs. People who caught me will get an email – I’ve got something for ya.

Check out the sorting demo video after the break

Continue reading “Automatic Color Detection” →

Electric (motor)cycle Extra


[Zach Norman] built this electric bike on a Harley frame. I couldn’t dig up much in the way of details, but the flickr photo set looks good.

[Micheal Raines] built a great looking electric chopper.

In the lightweight category, this hybrid (pedal/electric) bike uses li-poly batteries and a simple motor-tire drive to keep going. via [hacknmod]

Early this morning [tnkgrl] sent in her HSDPA mod for the OQO Model 2. Engadget beat me to it, but it’s a great mod for anyone who visits outside of those handy EVDO areas but want the speed for their UMPC. Living in the middle of nowhere means that I’m stuck with RxTT.

[andrew] built a handy parallel port A/D converter – so far he’s got it logging temps. The parts count is pretty low, depending on an ADC, a 555 and some OP amps.

Powershot Firmware Hacking


I was under the impression that canon firmware hacking had fallen by the wayside a bit. [random guy] pointed out that Canon firmware hacking is still alive and well, but it’s the smaller consumer models that are getting the attention. Several cameras, like the A610 happen to share the same digic II image processor as my Rebel XT. By uploaded some modified firmware, you can shoot RAW format pics, and get quite a few other features as well. There’s even a HDK (Hack Developer Kit) for rolling your own firmware. Most of the work appears to have been written up in Russian, but there’s an english wiki and guide page to get you going.

RC Digital Camera Interface


This isn’t a brand new hack, but it’s a great solution for most digital cameras that like to go to sleep on you.
[T. Black] put together a nice simple pic circuit to control a cheap aiptek digital camera. It uses a 12C508, a cap and a resistor. The PIC not only activates the shutter, but can wake up the camera from sleep mode. You don’t even have to provide a dedicated control channel – it can piggy-back on the throttle control signal. The hardest part of the project is tapping the signals on the SMD pc board inside the camera. There have been quite a few R/C camera controllers built, but this is certainly one of the most elegant. You can grab the code and schematic from the bottom of the project page.

GPS Enabled Radar Database


The page pretty much lacks every possible detail, but [Mattias] put together his own RADAR camera notification. It uses a published database of camera’s and a GPS receiver to notify the driver that they’re approaching one of the many permanent speed detection cameras in Sweden. Despite the lack of details, I can guess about the design. It shouldn’t be that difficult to construct something similar with a PIC or AVR with a decent amount of memory. Just compare the current location with the list, and notify the driver when it determines that it’s within a specified distance. Unfortunately all the RADAR detectors where I live are strapped to police cars.