3d printing

854 Articles

4Track Robot Gets Around With Ease

November 6, 2011 by 8 Comments

4track-robot

[Jon] has been developing a slick little RC robot in bits and pieces over the last year or so, which can constructed by anyone with access to a 3D printer. Servos and electronics aside, the entire thing can be put together in short order using the plans he posted on Thingiverse.

The robot makes use of four “caterpillar” type bots, which are all connected via a central frame. Once [Jon] had the general design for a single caterpillar bot down, he moved forward to create the robot you see above. His friend [Julián] lent a hand in the form of electronics and code, which allows the robot to be driven using a standard USB gamepad.

As you can see in the video below, the robot gets around nicely, climbing over obstacles with relative ease. While it is a bit loud, [Jon] says that’s due to the undersized servos they happen to be using at the moment. We think it looks great so far, but [Jon] already has plans to beef up the motors and add wireless control in the near future – we can’t wait to see it then!

Continue reading “4Track Robot Gets Around With Ease” →

An Interview With Bre Pettis, Founder Of MakerBot Industries

October 8, 2011 by 16 Comments

For those of you that don’t know, the Makerbot is a 3D printer created by Bre Pettis. It is probably the best-known 3D printer that you can buy at a price point meant for the hobbyist. Although this article doesn’t go into how the MakerBot is made, it focuses instead about the business itself and the man behind it. Bre was a hobbyist maker just like many of our readers, but decided to turn his passion into a successful business.

Although not all businesses are a success, Bre has made quite a start at becoming one. His company now employs 50 people and is currently hiring (like this posting for a “Web Warrior”) and has just secured $10 million in venture capital funding! Check out the full interview for all the details. It may inspire others to go from “hobby maker” to “professional.”

For other 3D printing-related posts, check out this one about the RepRap printer which is capable of replicating itself. For other ways to make your own parts, this rotomold machine may be of interest or this semi-DIY CNC router.

Solar-powered RepRap Prints Even When The Power Is Out

September 15, 2011 by 24 Comments

solar_powered_3d_printer_reprap

[Mark] wrote in to share a little creation that he is calling the first solar-powered 3D printer in existence. While we can’t say that we totally agree with him on that title, we will give him the benefit of the doubt that this is the first solar-powered RepRap we have seen thus far.

You might remember [Mark] from his previous exploits, but rest assured that there’s little possibility of anyone losing an eye with this one. He has taken his RepRap outdoors, and with the help of a solar panel plus a few batteries from Harbor Freight, he has the world’s first solar-powered RepRap*.

The trick behind keeping the RepRap running for such a long time with the sun as its only power source lies in the RAMPS board [Mark] uses. He has the 1.3 revision of the shield, which enables him to print objects loaded from an SD card rather than requiring a computer to be connected at all times.

So, if you happen to need the ability to print 3D objects where an extension cord cannot possibly reach, check out [Mark’s] setup and get to building!

* Maybe. Perhaps.

Continue reading “Solar-powered RepRap Prints Even When The Power Is Out” →

3D Printed Turtle Shell Racers Bring Mario Kart To Life

August 8, 2011 by 13 Comments

skimbals_3d_printed_turtle_shell_racers

Every once in awhile a project comes along that makes us say, “this is why we want a 3D printer!”

[Skimbal] is pretty well known in 3D printing circles for the incredibly detailed designs he has put out in the past. This time around, his focus is on motoring, Mario Kart style.

His Turtle Shell Racers are ripped right out of the Mario Kart series of games, and are built in the form of the multi-colored turtle shells with which most of us have a love/hate relationship. Constructed atop cheap RC trucks, the Shell Racers require 20-some odd printed parts apiece, but looking at the final results we think the time and money spent would be well worth it.

After watching the videos below, we think you’ll agree that these things look like a blast to play with. The Shell Racers were actually so impressive that they managed to land [Skimbal] a permanent gig with MakerBot Industries.

If you want to try making a set of your own, there are extensively detailed build instructions and all the STL files you can shake a stick at over at Thingiverse.

Continue reading “3D Printed Turtle Shell Racers Bring Mario Kart To Life” →

Incredibly Fast 3D Printing With The Ultimaker

August 2, 2011 by 92 Comments

ultimaker_3d_printer

There’s a new 3d printer on the block, and hot damn is it fast!

Hailing from the Netherlands, the Ultimaker 3D Printer has finally hit US shores, and aims to give the MakerBot a run for its money. The Ultimaker was designed by Utrecht Fab Lab manager [Siert Wijnia] along with two frequent lab patrons, [Erik DeBruijn and Martijn Elserman]. The trio were big fans of the MakerBot, but they wanted to make a better 3D printer.

And make a better printer, they did.

The Ultimaker can print using Either ABS or PLA plastic just like the MakerBot, but it is several magnitudes faster than its predecessor. While the MakerBot utilizes a moving build platform, the Ultimaker has a print head that can move along three axes. The moving print head, along with offset motors which are mounted on the printer’s frame allow the Ultimaker to build taller object than the MakerBot, at higher speeds.

That’s not to say that the MakerBot is bad in any way – rather, the presence of a new kid on the block shows how the evolution and progression of open source design benefits us all.

Keep reading to see a video of the Ultimaker in action, you won’t regret it!

Continue reading “Incredibly Fast 3D Printing With The Ultimaker” →

USB Reddit Upvote/Downvote Button

July 30, 2011 by 10 Comments

reddit_upvote_downvote_button

[Chris] has recently become a self-declared Reddit addict and wanted to build something that would streamline the process of voting on posts. Inspired by the Awesome Button hack featured on Make a little while back, he thought that a physical upvote/downvote button would be the ideal peripheral for all of his Reddit needs.

He was a big fan of using the Reddit Enhancement Suite, which allows you to submit votes with a single keystroke. He combined this browser extension with a Teensy development board, and had his voting button prototyped in no time. Once he fine-tuned the Arduino sketch that he used to emulate the required keypresses, he got busy building a case for his creation.

He busted out his 3D printer and had a custom working project box in about 30 minutes. He printed arrows for the upvote and downvote buttons, snapped everything together, and then gave his quick vote box a spin. Everything worked perfectly, and he’s quite happy with his creation.

We imagine that our resident Reddit addict in chief is pretty jealous right about now…

Stick around if you’d like to see a time lapse video of the button’s creation.

Continue reading “USB Reddit Upvote/Downvote Button” →

Selective Solar Sintering With Sand

June 25, 2011 by 54 Comments

[Markus Kayser] built an amazing solar powered SLS printer, but instead of using lasers and powdered plastics his machine uses the power of the sun to heat sand into complex shapes.

[Markus]’ printer uses the same concept as his earlier solar cutter – burning things with a magnifying glass. Interestingly, the printer isn’t controlled with stepper motors and reprap electronics – it’s completely cam driven. The solar panels only power the motor attached to the frame moving on bearings made from skateboard wheels.

We’d guess that [Markus] is using a little more than 2 square meters of Fresnel lenses in his project. Since solar irradiance is about 120 W/m² (PDF warning), [Markus] is concentrating a lot of energy onto a point the size of a quarter, which would be necessary to heat up sand to its 1500° C melting point. The resolution isn’t what you could get with a laser, but [Markus] was able to print an amazing bowl along with other complex 3d shapes.

Check out [Markus]’ video of the solar sinter printer after the break. There’s also a video of his previous experiment with the solar cutter.

Continue reading “Selective Solar Sintering With Sand” →