Boominator Solar Stereo Keeps The Music Pumping Even In Cloudy Weather

August 12, 2013 by Michael Ciuffo 22 Comments

Despite 40-some years of product improvements, boomboxes today still require a half dozen D-cell batteries and measure their life in single digit hours. After this, the batteries get chucked in the trash. Tired of the absurd cost and quantity of batteries required in a typical boombox, reddit user [anders202] has whipped up a solution that will keep the party going and the landfills empty. Using some off-the-shelf components and some impressive woodworking skills, he created the “Boominator”.

Despite its environmentally-conscious design, this green machine packs a whallop. Using its dual 10W solar panels, it can drive four woofers and tweeters to produce an estimated 102dB of sound with power to spare. This extra juice can be used to charge its two internal 7.2Ah batteries or a cellphone using the integrated USB charging ports. Better still, Anders chose amorphous solar panels (as opposed to crystalline) which produce power even in cloudy weather as demonstrated during a cloudy day at the Roskilde festival in Denmark. For more information, check out the reddit comment thread.

Video demo after the jump

Continue reading “Boominator Solar Stereo Keeps The Music Pumping Even In Cloudy Weather” →

Car Stereo Hack Gives Your Party Tunes And An Extra Place To Sit

March 29, 2013 by Mike Szczys 21 Comments

car-stereo-boombox

With summer on the horizon it’s time to start thinking about outdoor leisure. [x2Jiggy] is chomping at the bit having recently completed this project. It’s a portable stereo that also gives you somewhere to sit.

Unlike several of these types of project, he didn’t build the system inside of a cooler. Instead, the chassis was built from scratch using MDF. This material is strong and easy to work with, but we’d bet the finished case is a beast to haul around because of the weight. At least there’s a heavy-duty handle on either side so that you and a buddy can split the burden. One nice perk is that it’ll make a sturdy yet comfortable seat thanks the padded and upholstered top.

The audio components that went into it are all automotive parts and shouldn’t mind being jostled during transport. A computer PSU provides the 12V needed by the stereo. But there are a couple of external rail connections if you want to haul around a 12V battery instead.

Building A Boombox Where Tools Are Meant To Go

June 25, 2012 by Mike Szczys 28 Comments

[Danman1453] is ready to face the rest of his summer thanks to this toolbox boombox he built for outside use. It’s always nice to have some tunes when laboring at those not-so-fun jobs (we’ve got some windows that need re-glazing and you can bet we’re not doing that in silence). But if you can’t really hear it what’s the point? The highest volume [Danman1453] could get out of the consumer options he tried just wasn’t cutting it, and that led him to this project.

The only thing he bought to complete the boombox was some black spray paint. He already had an old toolbox for the enclosure, a head unit and the larger speakers from an old car, and the small speakers came from a set of computer speakers. Those are cleverly mounted in the compartments on the lid of the toolbox, pointed down so that they’re oriented correctly when the lid is propped open. The faceplate was even recycled by using wood an old shipping pallet.

He would like a little bit of advice though. When he’s playing a CD and the bass really gets bumping the head unit tends to skip. Does anyone have an easy method of isolating it from the speakers while still keeping it safe and sound in the portable enclosure?

Snap Together Boombox Great For Taking Your Music On The Go

December 23, 2011 by Mike Nathan 14 Comments

fab-boombox

[Matt Keeter] wanted to take his music on the go, and wrote in to share a great looking boombox he built for under $100. His goal was to put something together that could be made in pretty much any hackerspace/fab lab, so his boombox was made using simple materials.

He first modeled the boombox using cardboard, later fabbing it from wood on a laser cutter. The design allows the stereo to be snapped together, though [Matt] says that some joints were glued as an extra precaution. Inside the boombox resides an custom PCB he built which incorporates an ATmega328, an MP3 decoder, and an SD card to store his music.

One feature we really like is the control scheme [Matt] built into the boombox. Each of the capacitive touch buttons are positioned on top of a copper pad, which are wired into the control board. He says that while good in theory, he had a difficult time getting the buttons to work properly, though they seem to do the job well enough.

If you’re looking for a portable music solution and have access to a laser cutter, be sure to check out [Matt’s] page for schematics and firmware.

PVC Boombox Is Not A Potato Cannon

June 16, 2011 by Brian Benchoff 14 Comments

After [Luke] built a suitcase mini-ITX rig for LAN parties he was left with one problem: he didn’t have any speakers and he didn’t want to use headphones. Not wanting to do something boring like a USB-powered speaker setup, he built a PVC Boombox.

Built around 3 inch PVC pipe, the boombox houses an off the shelf 15 W amplifier, bluetooth receiver, and charge controller. [Luke] found a deal on a dozen 1400mAh lithium ion batteries and despite the standard, “if you don’t know what you’re doing, don’t use lithium” trope commonly given as advice, he forged ahead anyway. [Luke] picked up a power converter that charges the batteries and provides some protection. The batteries are charged though wall power with a transformer and a huge cap scrounged from an ATX power supply.

[Luke] is pretty pleased with his boombox. Not only does it put out some decent quality sound, the battery life should be tremendous. It’s not a ground-up build, but we think it’s a pretty nice project. [Luke] will be taking the ‘boomtube’ to the Detroit Maker Faire next month, so if you see him make sure to say hi.

Boombox Warns Construction Ahead

October 20, 2009 by Mike Szczys 21 Comments

construction-sign-boom-box

[Sam] built himself a boom box using salvaged parts and a car stereo. The case was cut using a CNC router he had access to at his school. The front panel is cut from a “Construction Ahead” road sign. The size of the case is based roughly on the rotting enclosures from which he pulled the speakers. He’s included connectors for external speakers as well as a USB charging port. The unit is powered by a gel battery and is recharged using an automotive battery charger.

A boom box lets you take the party anywhere. We like this one because of the pop art feel of the finished project.

Cigarette Tin Amp

June 30, 2008 by Juan Aguilar 7 Comments

We’re a little confused: [xXxMrCarlosxXx] built an amp out of a cigarette tin and calls it a Mobile Oppression Unit, but we thought all mobile oppression came in the form of giant, invincible crab-shaped palaces. In any case, or more specifically, in a repurposed Lucky Strikes case, he used an mp3 player, some speakers from a garage sale, and a bread board packing an LM1877N-9 chip “optimized for loudness” to construct a great-looking, compact boom box. Check out his Flickr stream at the read link and begin oppressing your neighbors with sheer volume today.