Satellite Hunting Hack Chat

September 18, 2023 by Dan Maloney 5 Comments

Join us on Wednesday, September 20 at noon Pacific for the Satellite Hunting Hack Chat with Scott Tilley!

From the very first beeps of Sputnik, space has primarily been the domain of nations. It makes sense — for the most part, it takes the resources of a nation to get anything of appreciable size up out of the gravity well we all live in, but more importantly, space is the highest of high ground, and the high ground has always been a place of advantage to occupy. And so a lot of the hardware we’ve sent upstairs in the last 70 years has been in the national interest of this or that country.

A lot of these satellites are — or were, at least — top secret stuff, with classified payloads, poorly characterized orbits, and unknown communications protocols. This can make tracking them from the ground a challenge, but one that’s worth undertaking. Scott Tilley has been hunting for satellites for years, writing about his exploits on the Riddles in the Sky blog and sometimes being featured on Hackaday. After recently putting his skills to work listening in on a solar observation satellite as its orbit takes it close to Earth again, we asked him to stop by the Hack Chat to share what he’s learned about hunting for satellites, both long-lost and intentionally hidden. Join us as we take a virtual trip into orbit to find out just what’s going on up there.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, September 20 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

Mass Production 3D Printing Hack Chat

August 21, 2023 by Dan Maloney 13 Comments

Join us on Wednesday, August 23 at noon Pacific for the Mass Production 3D Printing Hack Chat with Gabe Bentz!

We’ll take a wild guess and say that right now, within arm’s length of wherever you’re reading this, there’s something that was produced by injection molding. Look around; it’s there someplace, and whatever it is, thousands or perhaps millions of other identical artifacts were produced along with it, all by squeezing hot plastic into intricately machined metal tools.

It’s not much of an overstatement to say that, for good or for ill, the world is made from injection-molded plastic. But not every product can support the often considerable up-front costs associated with injection molding. The tooling needed is often remarkably complicated and correspondingly expensive, and running the machines that actually do the molding is expensive and highly specialized. Unless you’re committed to making a lot of parts, injection molding might just be out of your league.

But does that mean that medium-sized runs of parts are out of luck? Not at all! Gabe Bentz, founder and CEO of Slant 3D, is passionate about filling the manufacturing void where injection molding is prohibitive, either by virtue of start-up costs or because the part design is just not possible to manufacture. His massive print farms are busy day in and day out cranking out parts for customers that otherwise couldn’t be made. So if you’ve ever wondered what it takes to run a print farm, and what kinds of design considerations make a part a candidate for mass production by 3D printing, drop by the chat and we’ll see what he has to tell us.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, August 23 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

The Past, Present, And Future Of CircuitPython

August 1, 2023 by Tom Nardi 37 Comments

Modern microcontrollers like the RP2040 and ESP32 are truly a marvels of engineering. For literal pocket change you can get a chip that’s got a multi-core processor running at hundreds of megahertz, plenty of RAM, and more often than not, some form of wireless connectivity. Their capabilities have been nothing short of revolutionary for the DIY crowd — on any given day, you can see projects on these pages which simply wouldn’t have been possible back when the 8-bit Arduino was all most folks had access to.

Limor Fried

Thanks to the increased performance of these MCUs, hackers and makers now even have a choice as to which programming language they want to use. While C is still the language of choice for processor-intensive tasks, for many applications, Python is now a viable option on a wide range of hardware.

This provides a far less intimidating experience for newcomers, not just because the language is more forgiving, but because it does away with the traditional compile-flash-pray workflow. Of course, that doesn’t mean the more experienced MCU wranglers aren’t invited to the party; they might just have to broaden their horizons a bit.

To learn more about this interesting paradigm shift, we invited the fine folks at Adafruit to the Hack Chat so the community could get a chance to ask questions about CircuitPython, their in-house Python variant which today runs on more than 400 devices.

Continue reading “The Past, Present, And Future Of CircuitPython” →

CircuitPython Happenings Hack Chat With Adafruit

July 24, 2023 by Dan Maloney 29 Comments

Join us on Wednesday, July 26 at noon Pacific for the CircuitPython Happenings Hack Chat with The folks from Adafruit!

It’s always a party when the good folks from Adafruit stop by the Hack Chat, and we expect no less than that this time around. It’s hard to predict where the conversation will go when [LadyAda], [pt], and [Scott] roll in, but we strongly suspect it’ll center on what’s new in the world of CircuitPython.

We’ve heard that they’ve got some cool stuff going on with CircuitPython on the RP2040, which just might lead to a Python-based fix for the current Bus Pirate supply chain problem. It’ll be a swashbucklingly good time, so make sure you stop by.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, July 26 at 12:00 PM Pacific time. If time zones have you tied up, we have ahandy time zone converter.

Discussing The Finer Points Of Space-Worthy Software

July 17, 2023 by Tom Nardi 28 Comments

At the dawn of the Space Race, when computers were something that took up whole rooms, satellites and probes had to rely on analog electronics to read from their various sensors and transmit the resulting data to the ground. But it wasn’t long before humanity’s space ambitions outgrew these early systems, which lead to vast advancements in space-bound digital computers in support of NASA’s Gemini and Apollo programs. Today, building a spacecraft without an onboard computer (or even multiple redundant computers) is unheard of. Even the smallest of CubeSats is likely running Linux on a multi-core system.

As such, software development has now become part an integral part of spacecraft design — from low-level code that’s responsible for firing off emergency systems to the 3D graphical touchscreen interfaces used by the crew to navigate the craft. But as you might expect, the stakes here are higher than any normal programming assignment. If your code locks up here on Earth, it’s an annoyance. If it locks up on a lunar lander seconds before it touches down on the surface, it could be the end of the mission.

To get a bit more insight into this fascinating corner of software development, we invited Jacob Killelea to host last week’s
Software for Satellites Hack Chat. Jacob is an engineer with a background in both aero and thermodynamics, control systems, and life support. He’s written code for spacecraft destined for the Moon, and perhaps most importantly, is an avid reader of Hackaday.

Continue reading “Discussing The Finer Points Of Space-Worthy Software” →

Discussing The Tastier Side Of Desktop 3D Printing

July 12, 2023 by Tom Nardi 20 Comments

Not long after the first desktop 3D printers were created, folks started wondering what other materials they could extrude. After all, plastic is only good for so much, and there’s plenty of other interesting types of goop that lend themselves to systematic squirting. Clay, cement, wax, solder, even biological material. The possibilities are vast, and even today, we’re still exploring new ways to utilize additive manufacturing.

But while most of the research has centered on the practical, there’s also been interest in the tastier applications of 3D printing. Being able to print edible materials offers some fascinating culinary possibilities, from producing realistic marbling in artificial steaks to creating dodecahedron candies with bespoke fillings. Unfortunately for us, the few food-safe printers that have actually hit the market haven’t exactly been intended for the DIY crowd.

That is, until now. After nearly a decade in development, Ellie Weinstein’s Cocoa Press chocolate 3D printer kit is expected to start shipping before the end of the year. Derived from the Voron 0.1 design, the kit is meant to help those with existing 3D printing experience expand their repertoire beyond plastics and into something a bit sweeter.

So who better to host our recent 3D Printing Food Hack Chat? Ellie took the time to answer questions not just about the Cocoa Press itself, but the wider world of printing edible materials. While primarily designed for printing chocolate, with some tweaks, the hardware is capable of extruding other substances such as icing or peanut butter. It’s just a matter of getting the printers in the hands of hackers and makers, and seeing what they’ve got an appetite for.

Continue reading “Discussing The Tastier Side Of Desktop 3D Printing” →

Software For Satellites Hack Chat

July 10, 2023 by Dan Maloney 3 Comments

Join us on Wednesday, July 12 at noon Pacific for the Software for Space Hack Chat with Jacob Killelea!

In space, everything is harder. Hardware has to be built to withstand not only the harshest possible regimes of temperature and radiation but the rigors of launch. Power is at a premium, things that are supposed to stay cool get too hot, and things you want to keep warm freeze solid. It seems like everything you “send upstairs” has to be over-engineered compared with the stuff that stays down the gravity well.

But what about software? Yep, that needs special engineering too — after all, one little mistake, one uncaught exception, and millions or even billions of exquisitely crafted space hardware could become as useful as a brick. Jacob Killelea is an aerospace engineer who has done the rounds of a number of space concerns, and he’s worked on a number of space software projects, including a pulsed laser system with the potential for lunar orbital communications. He knows what it takes to write software that keeps space hardware ticking, and we’re excited to have him log into the Chat to talk about it.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, July 12 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

[Banner image: NASA’s GPM satellite.]