Running Into The Form 1 Printer At Maker Faire

October 1, 2012 by Brian Benchoff 20 Comments

[youtube=http://www.youtube.com/watch?v=yxNqMg_dwJI&w=470]

The Form 1 resin printer Kickstarter met its funding goal in just about 8 hours, and after five days is on track to be the most successful Kickstarter to date. Being so successful meant we had to drop by the FormLabs booth at Maker Faire to see what the hubub is.

From the sample prints floating around the booth, the Form 1 printer has amazing resolution – a 3 inch tall statue of a Greek god had as many features as a life-sized statue.

In the video (both above the fold and after the break), [David Cranor] goes over the features and finishing process of objects made on the Form 1.

Continue reading “Running Into The Form 1 Printer At Maker Faire” →

Rideable Hexawalker Is Chibikart’s Kin

September 30, 2012 by Brian Benchoff 20 Comments

[youtube=http://www.youtube.com/watch?v=hnG96qDibo0&w=470]

The folks from MIT made their way to the NYC Maker Faire, and of course brought a pair of Chibikarts. [Nancy Ouyang] wouldn’t allow those portable go karts take center stage at the MIT booth though; her Hexarideablepod (yes, that’s what she calls it) saw much more action from the kids clamoring to take something for a drive.

From the video above, [Nancy] shows off her six-legged, tennis ball-footed creation. The entire machine is powered by ~~car batteries and is controlled via two joysticks in something resembling driving a tank~~ Nope, it’s powered by A123 lipos and controlled with triggers taken from an electric drill.

As per [Nancy]’s wishes, I must mention that this project was for MITERS, a.k.a. the people from MIT that came down to Maker Faire.

Proper video after the break. The Internet at Maker Faire is horrible, give me a break.

Continue reading “Rideable Hexawalker Is Chibikart’s Kin” →

Control Giant Fireballs With Your Mind

August 6, 2012 by Eric Evenchick 9 Comments

[Matt Oehrlein] and [Ed Platt] from the i3 Detroit hackerspace created the Mind Flame project. The project uses Electroencephalography (EEG) sensors from NeuroSky to measure the user’s concentration level. When you’re concentrating hard enough, the Mind Flame launches a giant fireball, which probably breaks your concentration pretty quickly.

Propane is accumulated in tanks, and then released past a hot surface carbide igniter. It looks like an Arduino is used to open the valve, and the result is a massive fireball controlled by your brainwaves.

The Mind Flame was demoed at the Detroit Maker Faire as a competition. Two participants face off to see who can concentrate the hardest and make the device launch three fireballs first. In the future, they want to incorporate new competitive elements. One example is placing wooden houses in the line of fire, and letting opponents try to burn down their adversary’s house before their’s is set ablaze.

You can check out an interview about the project here.

[Via Make]

Large Version Of Operation Isn’t Much Easier Than The Original

August 4, 2012 by Brian Benchoff 10 Comments

Last weekend at the Detroit Maker Faire, the folks at the Lansing Makers Network brought a large-scale version of the classic electronic board game Operation.

MegOperation, as the Lansing hackerspace calls their build, is a gigantic printout of the chronically ill guy from Operation plastered onto a sheet of plywood. Wire loops surround each incision to detect when a surgeon’s unsteady hand when retrieving unnecessary body parts. These wire loops are connected to an Arduino that regulates the bell and light-up nose the team didn’t quite have time to finish.

Even though the team used an Arduino for their large-scale version of Operation – a game that doesn’t require any electronics besides a battery, wire, and buzzer – breaking out each body part to a separate Arduino pin seems pretty smart. A processing app keeps track of the time elapsed for each operation and can detect when the wire surrounding a particular incision is touched, perfect for competitive Operation play.

NC Maker Faire 2012: Other Projects

June 27, 2012 by Jeremy Cook 1 Comment

Although I didn’t get to see everything I wanted to at the Faire, there was a ton of stuff that was interesting enough for a mention. Many of these could probably merit their own separate article, and I didn’t get to talk about everything, so feel free to comment, or better yet write in to the tip line if you feel like you deserve more “air time.”

In the video after the break there’s everything from a [steampunk] display, to a model railroad club, and lots of projects in between. For a list of makers at this Faire, check out this page. Continue reading “NC Maker Faire 2012: Other Projects” →

Raleigh Maker Faire 2012

June 20, 2012 by Jeremy Cook 17 Comments

As [Caleb] mentioned earlier, I attended the Raleigh Maker Faire this year as an exhibitor. Although the table was for my personal site, some of you might have noticed that I was wearing a sweet [HAD] shirt and dispensing our stickers (which seemed to fly off the table). The event was extremely fun from the “other end of the table,” and I very much enjoyed meeting everyone. If you’re on the fence about showing off your stuff at one of these events, my advice would be to absolutely go for it!

The event itself is staffed entirely by volunteers, and Raleigh was able to attract more people this year than ever before. Thanks especially to [Kevin Gunn] and all of the volunteers for coordinating and setting everything up. Everyone was extremely helpful and the event was easy to find and prep for.

One warning though, if you do decide to set up a booth at a Faire, expect to talk a lot. You’ll feel like you’re among friends though, and you’re probably an expert (or at least can fake it) at whatever you’re displaying, so it’s really fun! I’ll be doing several more posts on this event, so be sure to check back, especially if you attended! Continue reading “Raleigh Maker Faire 2012” →

Mini Maker Faire In Eugene, OR This Weekend

June 14, 2012 by Brian Benchoff 6 Comments

[Rick Osgood] wrote in to tell us about the Eugene, OR Mini Maker Faire going on this weekend. The event is being hosted on the grounds of the Science Factory with a lot of help from the Eugune Makerspace

So far, Steamworks Cycles, the South Eugene Robotics Team, Oregon Rocketry and Eugene Rocketery will be at the Maker Faire showing off their skills and wares. It looks like an excellent place to spend the day, with events hosted by the Science Factor and the Eugene Makerspace all day long.

Tickets are $4.00 a pop; easy enough on our wallets, but unfortunately the official Hackaday transporter pad won’t be ready in time for this weekend. If anyone would like to write a blog post about the sights and sounds of the Eugene Mini Maker Faire, send it in and we’ll put it up.