Precision Temperatures For Cooking Or Whatever

sous-vide temp controller

If you have not heard of the sous-vide method of cooking you are not alone. This method uses a low temperature water bath to cook food in airtight plastic bags. Because the temperatures are much lower than normal the cooking time must be much longer and the actual temperature is very critical. The advantage is that the food is heated evenly without overcooking the outside. Since the food is bagged, it also retains moisture.

[Brian] put together a sous-vide control system to automatically maintain the correct temperature of a rice cooker. A temperature control unit was sourced on eBay for about $15. This is not a bad deal considering it has an LED display, control buttons, built-in relay and thermometer input. The control unit is mounted inside a project box with a few other components. The 120 volt AC line comes into the box where the neutral and ground are connected to the control unit and a standard outlet. The hot wire is connected directly to the control unit which determines if the hot wire is or isn’t connected to the outlet by using its built-in relay.

Continue reading “Precision Temperatures For Cooking Or Whatever”

The Hackaday Prize: Vote!

pilotsuit2Last week we rolled out Astronaut or Not, where Hackaday readers vote on aspects of the project entries of The Hackaday Prize. But why save all the prizes for the entries? What about the voters?

Starting tomorrow at exactly 1000 EDT (GMT -4), we’re going to choose someone registered on Hackaday Projects at random. If that person has voted, we’re giving them a Rigol DS1104B 100 MHz Digital Oscilloscope. If they didn’t vote yet, nothing!

This will continue about every week or so until someone has won.

Voting is open, so vote now for the best project concept for The Hackaday Prize. Make sure you don’t miss out when your number is drawn!

THP Hacker Bio: David Cook

thp-contestant-bio-david-cook

[David Cook] has been on the front page with gnarly hacks many times. We’re happy to present his Hackaday Projects profile as this week’s Hacker Bio.

His entry for The Hackaday Prize is something of a one-wireless-pair-to-rule-them approach to connected devices which he calls LoFi. We were delighted by his first demo video which is exactly what we envisioned for preliminary entries; [David] explains the concept and how he plans to implement it using a few visual aids to drive the point home.

Join us after the break to find out more about [David]. Oh, if you’re wondering about the times he’s been featured on Hackaday, check out his capacitor/coin cell swap which is one of our favorites.

Continue reading “THP Hacker Bio: David Cook”

The IFind Kickstarter Campaign Was Just Suspended

A little more than one month ago we featured a Kickstarter campaign that was raising quite a lot of eyebrows and over half a million dollars. This particular product was a battery-free tag meant to be attached to anything you may lose in your daily life. It was supposed to communicate with Bluetooth Low Energy (BLE) devices and have a 200ft (60m) detection range.

The main claim was that the iFind could harvest enough power from existing RF fields inside a typical home environment to operate for centuries. As Kickstarter just cancelled its funding a few minutes ago it seems that the basic maths Hackaday did a while ago were correct and that the project was in fact a scam. We’ll direct our readers to this particular comment that sums up all the elements pointing to a fraudulent campaign and show you the email that the backers received:

A review of the project uncovered evidence of one or more violations of Kickstarter’s rules, which include:

  • A related party posing as an independent, supportive party in project comments or elsewhere
  • Misrepresenting support by pledging to your own project
  • Misrepresenting or failing to disclose relevant facts about the project or its creator
  • Providing inaccurate or incomplete user information to Kickstarter or one of our partners

Putting aside this news, this campaign’s cancellation raises a bigger question: why didn’t it happen before and how could we control Kickstarter campaigns? On a side note, it’s still very interesting to notice the nearly religious fervor of the sunk cost fallacy that such campaigns create in their comments.

Thanks [Rick] for the tip!

Making Flexible Wood Using A Laser Cutter

laser cut curved wood

If you’re one of the lucky ones who has access to a laser cutter, you’re definitely going to want to check out [Aaron Porterfield’s] latest work. He’s been experimenting with making flexible wood.

We’ve all probably seen wood cut with slots added to allow flexibility in a single direction, but did you know with the use of lattice hinges you can do so much more? [Aaron’s] been playing around with parametric patterns and has made some really cool examples — the best part is, he’s sharing them all for free (both .DXF and vector files)!

His main goal was to create a pattern that is in flexible in multiple directions, which he almost achieved — but the really cool thing he figured out was creating a pre-formed curved surface by mapping the bend in Photoshop first…

Continue reading “Making Flexible Wood Using A Laser Cutter”

Hackaday Reddit AMA (ask Me Anything) Happening Right Now

hackaday-szczys-reddit-proof_1Today we’re interacting on an “Ask Me Anything” over at Reddit.

Now’s the time to ask your question about all-things-Hackaday. No topic is off limits. Wonder how the Blog operates? What’s the deal with Hackaday Projects? Need an answer to questions about The Hackaday Prize? Just ask!

[Mike Szczys] started the thread and I’ve provided proof as seen here, but most of the writing staff are Reddit regulars so questions for specific writers are welcome as well. What’s on your mind?

Congress Destroys A Hobby, FAA Gets The Blame

As ordered by the US Congress, the FAA is gearing up to set forth a standard for commercial UAVs, Unmanned Aerial Systems, and commercial drones operating in America’s airspace. While they’ve been dragging their feet, and the laws and rules for these commercial drones probably won’t be ready by 2015, that doesn’t mean the FAA can’t figure out what the rules are for model aircraft in the meantime.

This week, the FAA released its interpretation (PDF) of what model aircraft operators can and can’t do, and the news isn’t good: FPV flights with quadcopters and model airplanes are now effectively banned, an entire industry centered around manufacturing and selling FPV equipment and autopilots will be highly regulated, and a great YouTube channel could soon be breaking the law.

The FAA’s interpretation of what model aircraft can and cannot do, and to a larger extent, what model aircraft are comes from the FAA Modernization And Reform Act Of 2012 (PDF). While this law states the, “…Federal Aviation Administration may
not promulgate any rule or regulation regarding a model aircraft…” it defines model aircraft as, “an unmanned aircraft that is capable of sustained flight in the atmosphere; flown within visual line of sight of the person operating the aircraft; and flown for hobby or recreational purposes.” The FAA has concluded that anything not meeting this definition, for example, a remote controlled airplane with an FPV setup, or a camera, video Tx and Rx, and video goggles, is therefore not a model aircraft, and falls under the regulatory authority of the FAA.

In addition, the FAA spent a great deal of verbiage defining what, “hobby or recreational purposes” in regards to model aircraft are. A cited example of a realtor using a model aircraft to take videos of a property they are selling is listed as not a hobby or recreation, as is a farmer using a model aircraft to see if crops need water. Interestingly, receiving money for demonstrating aerobatics with a model aircraft is also not allowed under the proposed FAA guidelines, a rule that when broadly interpreted could mean uploading a video of yourself flying a model plane, uploading that to YouTube, and clicking the ‘monetize’ button could soon be against the law. This means the awesome folks at Flite Test could soon be out of a job.

The AMA, the Academy Of Model Aeronautics, and traditionally the organization that sets the ‘community-based set of safety guidelines’ referred to in every law dealing with model aircraft, are not happy with the FAA’s proposed rules (PDF). However, their objection is a breathless emotional appeal calls the proposed rules a, “a strict regulatory approach to the operation of model aircraft in the hands of our youth and elderly members.” Other than offering comments per the FAA rulemaking process there are, unfortunately, no possible legal objections to the proposed FAA rules, simply because the FAA is doing exactly what congress told them to do.

The FAA is simply interpreting the Modernization And Reform Act Of 2012 as any person would: FPV goggles interfere with the line of sight of an aircraft, thus anyone flying something via FPV goggles falls under the regulatory authority of the FAA. Flying over the horizon is obviously not line of sight, and therefore not a model aircraft. Flying a model aircraft for money is not a hobby or recreation, and if you’re surprised about this, you simply aren’t familiar with FAA rules about money, work, and person-sized aircraft.

While the proposed FAA rules are not yet in effect, and the FAA is seeking public comment on these rules, if passed there will, unfortunately, exactly two ways to fix this. The first is with a change in federal law to redefine what a model aircraft is. Here’s how to find your congresscritter, with the usual rules applying: campaign donations are better than in-person visits which are better than letters which are better than phone calls which are better than emails. They’ll also look up if you have voted in the last few elections.

If passed, the only other way these rules will align with the privileges model aircraft enthusiasts have enjoyed for decades is through a court ruling. The lawsuit objecting to these rules will most likely be filed by the AMA, and if these rules pass, a donation or membership wouldn’t be a bad idea.