Open Source Electric Car, CarBEN, Produces No Carbon

June 11, 2014 by Rich Bremer 74 Comments

Raise your hand if you have designed and built a full size car…. Nobody? Doing so would be a huge task considering car manufactures have thousands of people involved with designing and building a car model. Eager beaver [Neil] has stepped up and taken on that challenge. He’s started an open source project he’s calling the CarBEN.

The plan is for the car to hold 5 people comfortably while being just a tad larger than a Scion xA. The body is made of foam and will be covered with fiberglass. The car is designed in a shape that tapers in towards the rear of the car and has features like a smooth underside and covered wheels to create a low coefficient of drag. The goal is for this beauty to get 300-400 miles per charge with an Miles Per Gallon Equivalent of over 224.

Continue reading “Open Source Electric Car, CarBEN, Produces No Carbon” →

DIY Embroidery Machine Sews Your Name In Your Undies

June 10, 2014 by Rich Bremer 32 Comments

DIY Embroidery Machine

If you were in the market for a sewing machine with embroidery capabilities, you’d either be spending a bunch of money or settling for a lower-cost machine that can only do a handful of pre-programmed designs. A DIYer by the name of [SausagePaws] came up with a 3rd option, he would build one himself. He was also highly motivated, [Mrs SausagePaws] wanted one!

An off the shelf embroidery machine is similar to a standard sewing machine except the movement of the fabric is done automatically rather than by hand. Not only does the work move, but it has to move in time with the needle traveling up and down. [SausagePaws] took a no-nonsense approach and decided the simplest way to go about the task was to mount an embroidery hoop to the end of an XY drive system.

Continue reading “DIY Embroidery Machine Sews Your Name In Your Undies” →

Not Having The Room Isn’t A Good Reason To Not Have A CNC Router Anymore

June 7, 2014 by Rich Bremer 35 Comments

PhlatPrinter CNC Machine

Typically, CNC Machines take up a larger footprint than that of the raw material it is cutting. The size of such a machine may have prevented interested makers/hackers from buying or building one for themselves. If you are one of those people then you’d be interested in [Fly3DMon’s] series of CNC Router projects called PhlatPrinter.

A typical CNC Router has a bed that the work piece is mounted to and that work piece stays stationary. The tool then moves in 3 axes, removing material, leaving behind a finished part. The PhlatPrinter works more like a large format plotter, where the work piece is moved back and forth via rollers while the tool only moves in 2 directions. What this allows is a CNC Machine that takes up very little floor space when not in use that can handle any length of material!

Continue reading “Not Having The Room Isn’t A Good Reason To Not Have A CNC Router Anymore” →

Lathe CNC Upgrade Is Nothing To Shake A Turned Stick At

June 6, 2014 by Rich Bremer 30 Comments

7x12 CNC Lathe Conversion

We see a lot of CNC Machines here on Hackaday but not too many of them are lathe-based. [Jim] sent us an email letting us know his dissatisfaction regarding the lack of CNC Lathes and included a link to one of his recent projects, converting a small manual lathe to computer control. This isn’t some ‘slap on some steppers‘ type of project, it’s a full-fledged build capable of tight tolerances and threading.

The project is based on a 7×12 Mini Lathe. There are several brands to choose from and they are almost identical. Check out this comparison. [Jim] started with Homier brand.

The first thing to get upgraded was not related to the CNC conversion. The 3″ chuck was replaced with a 5″. Changing it over was easy using an adapter plate made for the task. For the X Axis, the stock ways and lead screw were removed and replaced by a THK linear slide. This slide only has 2.5″ of travel and is perfect for this application. The travel being so short allowed the final eBay auction price to be under $40.

Continue reading “Lathe CNC Upgrade Is Nothing To Shake A Turned Stick At” →

Helix Turning Tool Born From Necessity

June 4, 2014 by Rich Bremer 16 Comments

helix turning tool

Sometimes while working on a project there comes a point where a specialized tool is needed. That necessary tool may or may not even exist. While [Fabien] was working on his DNA Lamp project he needed to bend a copper wire into a helical shape. Every one of us has wrapped a wire around a pencil and made a little springy thing at some point. While the diameter may have been constant, the turn spacing certainly was not. [Fabien] came up with a simple gizmo to solve that problem.

The tool utilizes an 8mm rod that will ensure the ID of the helix is indeed 8mm. We’ve already discussed that was the easy part. To make certain the turn spacing is not only consistent but also of the correct amount, a wooden frame is used. The frame has holes in it to allow the 8mm rod to pass through. Adjacent to those rod holes are much smaller holes just a bit larger than the copper wire that will become the helix. These holes are drilled at an angle to produce the correct turn spacing. [Fabien] figured out the correct angle by taking the desired turn spacing distance, helix diameter and wire diameter and plopping it in this formula:

Continue reading “Helix Turning Tool Born From Necessity” →

Jeep Power Wheels Upgrade Only Reuses Body

June 4, 2014 by Rich Bremer 14 Comments

Power Wheels Racing Jeep

It is debatable whether [Jamie] upgraded his Power Wheels Jeep or built a beast of a mini vehicle and only added a Power Wheels Jeep body. Either way, this Racing Power Wheels Jeep is awesome. The goal of the project is to race in the Power Racing Series races held at Maker Faires.

This vehicle is no joke. It is still electric but runs on 24volts DC. It has pneumatic rubber tires for traction and disk brakes for stopping. The ‘gas’ gauge is a volt meter mounted into the dash next to the motor temperature gauge. As if that was not enough, the headlights and tail lights work. Take note of that sweet custom frame, it was mostly made from an old bed frame.

Continue reading “Jeep Power Wheels Upgrade Only Reuses Body” →

CNC 3020 Router Gets A Power Supply Upgrade

June 1, 2014 by Rich Bremer 32 Comments

CNC3020 Router power supply upgrade

We’ve covered these CNC 3020’s in the past. They are physically solid machines but the electronics offer some room for improvement. [Peter] is certainly no novice at working on these machines. He’s already fixed a failed power supply and he’s back at the upgrades, again focused on the power supply. This time he’s replacing the transformer-based one with a couple switching power supplies.

The stepper controllers and spindle speed circuit need both 48 and 24 VDC. [Peter] purchased two separate power supplies, one for each voltage required. Before installing the new supplies, the stock one had to be removed, along with the transformer. Even with the old parts removed, there was still not enough room for both new supplies to be installed inside the stock case. [Peter] decided that mounting them to the top of the case would be appropriate.

Continue reading “CNC 3020 Router Gets A Power Supply Upgrade” →