DIY Ceiling Rack Keeps Your Bikes Out Of The Way

February 22, 2014 by James Hobson 22 Comments

bikke lift

Need to optimize some space in your garage? Why not build a ceiling mounted winch-assisted bicycle rack!

[Mathieu] already has a rather spacious garage, but wanted to make it even more organized. He built the bicycle rack out of 1″ square aluminum tubing, and it’s all bolted together (no welding required!). The bikes sit in aluminum U-channels to be secured in place. The entire rack is hinged off of the back wall, and a pulley system using a little ATV winch raises and lowers the rack for easy access to the bikes.

It’s currently powered off a 12V motorcycle battery, which he plans to add a trickle charger to — that being said, it has lasted for more than 6 months and he still hasn’t had to recharge it! He threw together a little control circuit featuring two relays (up and down) and a 2 channel remote control. The motor is a little slow, but it does the job quite well. If he wanted to get it going a bit faster, he could probably double the voltage to allow for a quicker movement — since it’s only on for short periods of time it should be okay. Seeing hacks like this has us wondering just how many winch-driven extras you could build into a single abode.

Check out the following video of it in action!

Continue reading “DIY Ceiling Rack Keeps Your Bikes Out Of The Way” →

A Cheap Honeycomb Table Replacement For Your Laser

February 22, 2014 by James Hobson 36 Comments

FH6KXVYHRWN86BN.LARGE

CO2 lasers make use of a honeycomb table which allows you to support parts you are cutting — without cutting into the bed too much. Unfortunately they are a consumable part, so they will eventually wear out, and they aren’t that cheap. [Claptrap] came up with an excellent alternative.

A few months ago, his radiator blew in his station wagon, and it had to be replaced. He was about to throw it out when he realized the similarity of the radiators cooling fins, to that of his honeycomb table… He cut it down to size, pressure washed it (though he notes you should probably wash it first before cutting) and put it in place. It works great!

The only caveat we have is that you should probably flush the radiator with a water pump first — you don’t want to be heating up any residual radiator fluid inside the radiator channels!

Continue reading “A Cheap Honeycomb Table Replacement For Your Laser” →

FLUX 1440: A Highly Impractical But Awesome Clock

February 22, 2014 by James Hobson 52 Comments

One our tipsters just sent us this great project — it’s a unique style of clock that we haven’t seen before. It was completed as part of what we think was a post-graduate program by [Felix Vorreiter]. This is FLUX 1440 (translated).

It uses 1200 meters of marked rope that is fed into the clock and strung between various pulleys and gears. Every second, the rope is moved 1.3cm. Every 57 seconds, the time is readable across the strands of rope — but only for 3 seconds. After that everything goes “back into the river”, a metaphor for chaos.

The explanation behind it is in German, but we’ve tried to piece together a general statement about the meaning behind it. Of course, we’d love if one of our German readers could provide a better translation!

FLUX 1440 displays time as a spatial dimension and counts the length of a day using a long segmented rope. The length of each minute is felt physically, as the viewer must wait as the shapes change until the current time reveals itself from the chaos of the markings.

Stick around for an extremely well produced video demonstrating it — it’s also in German, but we think you’ll be able to piece together the meaning.

Continue reading “FLUX 1440: A Highly Impractical But Awesome Clock” →

Researchers Create Synthetic Muscle 100 Times Stronger Than The Real Thing

February 21, 2014 by James Hobson 110 Comments

synth-muscle-02-de

A team of researchers at the University of Texas at Dallas have come up with an ingenious way to make a low-cost, high strength, artificial muscle. Their secret? Fishing line. The study was just published today in the journal Science, and the best part is they describe how to recreate it at home.

To create it, the researchers take regular fishing line (polyethylene or nylon string) and twist it under tension until it curls up into a tightly formed spring. It can then be temperature treated to lock in this position.

When heated again, the plastic tries to untwist — the peculiar thing is, this causes the entire coil to compress — think of it as Chinese finger-trap. Polyethylene and nylon molecules also contract lengthwise when heated. It can contract up to about 49%, with as much pulling power as 100 times its equivalent human muscle in weight. This equates to about 5.3 kilowatts of mechanical work per kilogram of muscle weight — similar to the output of a jet engine.

Stick around to see the video of how to make it — we’re excited to see what you guys think up for project applications!

Continue reading “Researchers Create Synthetic Muscle 100 Times Stronger Than The Real Thing” →

This Party Jukebox Is Bigger On The Inside

February 21, 2014 by James Hobson 7 Comments

In honor of the recent 50th anniversary of Doctor Who, [David Prouty] decided to build a 1/3rd scale replica of the Tardis. He also decided to give it a few extra features on the inside… Introducing the Recycled Tardis Jukebox!

It was constructed primarily out of recycled cardboard boxes (pizza, FedEx, UHaul, etc) and [David] has done an amazing job painting and detailing it!

Since it’s so big, [David] wanted it to be functional too, so he’s added Bluetooth speakers, sound activated lights, disco balls, and even a fog machine on the inside. It’s all controlled wirelessly by remote, and it’s sure to be a hit at any party he decides to throw.

Stick around for the videos showing it in action — and of course, making our favorite sound VWORRRRRP VWRORRRP VWORRRP!

Continue reading “This Party Jukebox Is Bigger On The Inside” →

Eye Of The Tiger — As Played By A Dot Matrix Printer

February 20, 2014 by James Hobson 39 Comments

Do you have a big hackathon coming up? Need to start a training montage like Rocky? We don’t think you can get any more awesome than this Dot Matrix Printer that can play music!

The hack makes use of an old 24-pin dot matrix printer, which is now a MIDI compatible sound generator. It uses an Atmega8 and an FPGA connected to different parts of the original printer’s circuit board. The Atmega8 takes the incoming MIDI data and communicates it to the FPGA while driving the stepper motors for both the paper feed and print head. The FPGA on the other hand is responsible for the PWM to drive the individual printer pins. This means the printer can play up to 21 notes simultaneously, and it’s capable of taking in up to 16 MIDI channels, all with individual volume, pitch, and key velocity!

[MIDIDesaster] has several other musical examples of their printer in action, including the Duke Nukem theme, Hysteria by Muse (one of our favorites), and even the Wallace and Gromit theme!

It’s a similar project to this printer synth we shared almost 9 years ago! Stick around to get pumped up with Eye of the Tiger! But if you’re wearing headphones… turn the volume down.

Continue reading “Eye Of The Tiger — As Played By A Dot Matrix Printer” →

Real Life Flappy Bird In A Box

February 20, 2014 by James Hobson 14 Comments

Flappy bird this, flappy bird that, we’re really not too sure how a clone of the original helicopter game became so darn popular. Anyway, [Fawn Qiu] — founder of MakeAnything — decided to hop on the bandwagon and made this awesome physical version of Flappy Bird!

She threw it together at the Tribeca Hacks Hackathon, and it uses an Arduino, two servo motors, a reed switch and some magnets. She was inspired by the original Mario in a Box game and this is a great example of her project MakeAnything, which is a technology project community which helps foster the new culture of STEM (Science Technology Engineering Mathematics) for kids and adults alike, in the United States. They believe that “with the right tool and instructions, we can all make anything and everything!”.

Stick around for the following video where [Fawn] takes it to the streets to let random strangers try their hand at the now iconic game!

Continue reading “Real Life Flappy Bird In A Box” →