Vending Machine Is Now Cyborg Friendly

March 25, 2014 by James Hobson 34 Comments

OZ6dlvn

Don’t you hate having to pull out your wallet or cellphone in order to pay for something? What if you could just wave your hand and transfer money that way? Well [David] did, so he decided to do something about it. He made the vending machine in his hackerspace, FamiLAB, cyborg friendly.

The problem was, the vending machine wasn’t technically his to play around with… so he had to do this hack without actually modifying the machine itself — which we admit, actually makes it quite a bit more interesting!

But first, why is [David] even doing this? Is he a cyborg or something? Well, not quite, but he’s quite enthusiastic about bio-tech (is that what we call it now?) — anyway, he has NFC implants in his hand, and magnets in his fingertips to give him a sixth “electro-sense”. Wanting to take the most advantage of these augmented abilities, he put together this clever NFC credit card emulator.

Continue reading “Vending Machine Is Now Cyborg Friendly” →

Open Source SwitchMote Promises Easy Home Automation

March 21, 2014 by James Hobson 30 Comments

[Felix Rusu] is fast becoming a big name in home automation with his clever Moteino systems. His latest is called the SwitchMote which is a super easy way to upgrade your light switches for home automation, and he’s just released the source!

The SwitchMote is a drop in wireless light switch which lets you control a standard AC load, limited to 100W at this time. It uses a solid state relay (SSR) to perform the switching, but like any project involving mains electricity… MAKE SURE YOU KNOW WHAT YOU’RE DOING!

It makes use of a Moteino (duh) which is a wireless Arduino clone that operates over RF. We’ve seen it used before to control a Keurig coffee maker, operate a garage door over the internet, and even text you when your sump pump fails and your basement is about to flood!

Excited? Take a look at his GitHub repository, and check out how it works in the following video.

Continue reading “Open Source SwitchMote Promises Easy Home Automation” →

Need To Reference The US Constitution Fast? How’s 6 Seconds Sound?

March 21, 2014 by James Hobson 34 Comments

CONSTI2GO-Thibault-Brevet-2

Well, unless you know exactly what you’re referencing it’s going to take you a lot longer, but this clever serial receipt printer hack will let you print the whole darn thing in just 6 seconds!

Commissioned by [Jeff Goldenson] for his LABRARY.bike (quite literally a pop-up library on a bike), it was actually shown off at SXSW Interactive — did anyone see it in person? The artist-hacker who created it is [Thibault Brevet], the guy who brought us the DRM chair that only works 8 times before it falls to pieces.

Anyway, this cool and rather suspicious looking tube with a serial cord hanging out contains an Arduino, a max232 chip and a small Li-Po battery. The Arduino communicates with the printer through the max232 chip by converting the TTL signal to RS-232. It has a single button on top, which when it is connected to the printer will send out the US Constitution over the serial interface via ESC/p language.

Did we mention how fast it is?

Continue reading “Need To Reference The US Constitution Fast? How’s 6 Seconds Sound?” →

Meet Lynx, A (costly) Offline Password Keeper

March 19, 2014 by Mathieu Stephan 28 Comments

Maybe because he didn’t want to wait for the Mooltipass to be produced, [davidhend] built himself his own offline password keeper, named Lynx.

It is based around an Arduino Pro 328, a 2.8″ TFT touch screen, an RFID card reader, an FTDI basic breakout and finally a li-ion battery. Lynx is therefore self-powered and uses an RFID card to later read the XOR-encrypted passwords located in a SD card. A USB serial connection is used to send the passwords to the computer, which also charges the battery. The current BoM cost is around $220 but we’re quite sure it can be made for much cheaper when not using pre-made boards. Looking at the official GitHub repository tells us that the XOR key is stored inside the microcontroller and that Lynx checks the RFID card code to allow encryption/decryption.

On a side note, we recently published a FAQ on the official Mooltipass GitHub. You’re welcome to let us know what questions we may have forgotten.

Mug Music Is Good To The Last Drop

March 19, 2014 by Kristina Panos 6 Comments

[Bonnie] is majoring in CS at Princeton and minoring in Awesome. She is taking an electronic music class and had to produce a digital instrument for her midterm project. She and her friend [Harvest] came up with Mug Music, which turns a ceramic mug of water into an instrument.

The circuit is very easy to replicate with an Arduino, a coil, and a few resistors and capacitors. [Bonnie] wanted to experiment with Disney Research Lab’s Touché method of touch detection, and Mug Music is based on this Touché for Arduino Instructable. The inputs are turned into MIDI notes with ChucK, a real-time sound synthesis language developed at Princeton.

As you may have guessed and will see in the demonstration video after the jump, you aren’t limited to touching the water. The entire mug will produce sounds as well. [Bonnie] says you can trigger a thunderclap if you touch the water and a grounded surface simultaneously.

This would be a great project to explore with kids, especially as a music therapy vehicle for kids on the autism spectrum. It isn’t as physical as these portable musical stairs, but it may draw less attention from lawyers.

Continue reading “Mug Music Is Good To The Last Drop” →

GEVCU – An Open Generalized Electric Vehicle Control Unit

March 19, 2014 by Mathieu Stephan 32 Comments

At Hackaday we’re very happy to see the increasing number of open hardware devices that appear everyday on the internet, and we’re also quite thrilled about open-source electric cars. Pictured above is the GEVCU, an open source electric vehicle control unit (or ECU). It is in charge of processing different inputs (throttle position, brake pressure, vehicle sensors) then send the appropriate control commands to electric motor controllers (aka inverters) via CAN bus messages or digital / PWM signals.

The project started back in December 2012 and was originally based on an Arduino Due. Since then, the GEVCU went through several revisions and ultimately a complete custom board was produced, while still keeping the Cortex M3 ATSAM3X8E from the Due. As you may have guessed, the board also includes a Wifi transceiver so users may adjust the ECU parameters via a web based platform. All resources may be downloaded from the official GitHub.

Listening To Electromagnetic Interference With A RTLSDR Dongle

March 18, 2014 by Mathieu Stephan 19 Comments

Being curious by nature, [Marios] decided to see what kind of radio-frequency emissions may be generated by an Arduino connected to a simple breadboard wire, and more importantly try to pick them up using a RTLSDR dongle. Electromagnetic interferences are disturbances that affect electrical circuits due to either electromagnetic induction or electromagnetic radiation. Before going into the market, all electrical devices are thoroughly checked for unwanted electromagnetic emissions so they usually aren’t obvious suspects when such problems arise.

Using the Arduino embedded PWM controller in fast PWM mode and by manipulating the duty cycle, he actually managed to create a primitive form of amplitude modulation and was able to transfer a very simple audible signal at several frequencies up to 1.75GHz. Embedded after the break here is video of the system at work.

As a side note, did you know that during the solar storm of 1859 the EMI were so strong that the telegraph operators received several shocks? Pipelines maintenance systems also have to be aware of such events, that can lead sensors to provide inaccurate results.

Continue reading “Listening To Electromagnetic Interference With A RTLSDR Dongle” →