Cardboard Lampshade Makes Ordinary Recycling A Centerpiece Of Your Room

March 13, 2013 by Mike Szczys 5 Comments

This cube lamp was assembled using common cardboard. Not only does it look interesting, but it’s basically free with every Ikea purchase since all you need is a source of cardboard, cutting implements, and glue.

[Lindarose92] fabricated the shade out of narrow strips of corrugated cardboard. This particular lamp also has a cardboard base but we’re sure you could use it for just about any light source with doesn’t generate enough heat to cause problems. The build starts out with the tedious process of cutting 5mm by 8cm strips, and you’re going to need a lot of them. Each strip is cut perpendicular to the corrugation, which allows the light to shine through the wave pattern. The strips are then glued into 8cm x 8cm squares, which are in turn glued together into the four by four panels that make up each side of the cube.

Boom, you’re done. And if you get tired of it, just toss the thing in your recycling bin.

[via Hacked Gadgets]

Briquette Press For Rocket Stove Fuel

March 13, 2013 by Mike Szczys 23 Comments

briquette-press-for-rocket-stove

[Gregory] uses a rocket stove for heating when it’s cold outside. He’s been trying out all kinds of different materials as fuel when the idea of making his own briquettes from waste materials came to mind. Obviously the project works. As you can see in the image above, he has just formed a lump of fuel using a mixture of newspaper pulp and sawdust.

The orange device with the ax handle seen in the background is his own creation. You can see the device in action in the video after the break. In the video comments he also links to a CAD file if you’re interested in building your own.

If it’s a rocket stove you’re interested in there’s always the option of building your own.

Continue reading “Briquette Press For Rocket Stove Fuel” →

Tymkrs’ Deconstruction For The Zombie Apocalypse

March 1, 2013 by Brian Benchoff 4 Comments

tmker

We’ve seen a few of the projects from The Deconstruction, a 48-hour build-a-thon for hackerspaces and other groups around the globe. Of course Tymkrs, a pair of geeky vloggers famous for their building prowess, were part of The Deconstruction, and in the process they came up with a few really cool builds at their hackerspace, The Rabbit Hole, in Rochester, MN.

Their theme for The Deconstruction was “a zombie apocalypse”. Instead of homemade crossbows and electric fences, Tymkrs and the rest of The Rabbit Hole put a ‘rebuilding society’ spin on the whole zombie apocalypse and ended up building things that would be useful after Z-day.

First up is a PVC bike trailer designed to easily attach to the back of a bicycle. The frame is made out of a few pieces of 2″ PVC pipe with some nylon rope knotted together for a nice webbed platform. a 5/8″ steel rod was turned down to accept two 20″ bike wheels. A useful build, even if it’s not the zombie apocalypse.

The second build is a solar japanese lantern, combining [Addie]’s love of solar lanterns and japanese-style lanterns into one great project. The materials for this build came from a broken solar-powered lantern with completely revamped electronics. There’s a Joule thief to keep the LED lit, and a few solar panels to charge up the batteries during the day. Of course the build wasn’t complete without a little decoration, so [Addie] drew four panels of rabbits for The Rabbit Hole team.

By far the most dangerous build undertaken by The Rabbit Hole is their can crusher. It’s a pair of snowblower tires powered by a disused garage door opener. The theory of operations is that a can will drop in between the rotating wheels, crushing the can, and sending it to a waste basket below the device. In practice, the device didn’t really live up to expectations, but it’s loud and dangerous, so we’ll give it a pass.

No Sleep Till Brooklyn Aquaponics Installation Is Complete

January 16, 2013 by Mike Szczys 12 Comments

brooklyn-aquaponics-build

This is some extreme gardening. [I Am Become Derpth] didn’t let lack of space or tillable soil stop him from growing a bountiful harvest. Instead of cutting though prairie sod to begin the farming he had to contend with the concrete expanses found in the NYC area. Here he’s nearing the end of an impressive aquaponics installation in Brooklyn, New York.

For a good overview of what aquaponics is all about we suggest you take a look at this Oakland, CA setup. The heart of the system is a closed loop that uses both plants and fish for balance. The byproduct is edible greens. The image above shows the growing beds through which water is circulated. They’re filled with clean gravel which keeps the roots happy. Once the water has made it through this system it is piped into the basement of the apartment where water tanks filled with fish reside. The system uses the fish waste (broken down by bacteria) to feed the plants.

It’s an efficient system but one thing’s for sure, you don’t just go out and buy a rig this complicated. We think you’ll really enjoy going through the build log linked at the top.

[via Reddit]

Peltier Campfire Generator Put Out 14W (kind Of)

January 10, 2013 by Mike Szczys 47 Comments

peltier-campfire-generator

This is the control and monitoring hardware which [Jack] built for his campfire electricity generator. He’s done an amazing job to get this far. You can see he’s pulling 1 Amp at 14.2 Volts off of the system. But there one gotcha that’s still plaguing him.

The rig uses a big metal plate as a heat sink over the campfire (which is simulated by a cooking stove for testing). On the back of that plate is an array of Peltier coolers which generate electricity based on the temperature difference from one side to the other — it’s the same theory behind candle generators. The cold side has a heat sink with water running through it. What you see above are three relays which switch between using the Peltiers in series or in parallel based on their voltage output. You can’t really make it out there but there’s a radiator and recirculating pump to the right which are used to cool the water. The gotcha we mentioned is that the radiator can’t quite keep up with the heat of the fire. To get the results seen above [Jack] is running cold water from the tap through the radiator. But maybe if this were used in the winter the water could be circulated through a big box full of snow. Just keep shoveling it in to keep up the electrical potential!

After the break we’ve embedded part four of the project video as it shows off the array of peltier coolers quite well. You will also see part five (radiator and recirculating pump testing) from which this image was taken.

Continue reading “Peltier Campfire Generator Put Out 14W (kind Of)” →

Satellite Dish Solar Cooker Bakes Potatoes And More

January 8, 2013 by Mike Szczys 16 Comments

baked-potatoes-in-a-dish-solar-cooker

Hone your survival skills by harnessing the sun’s rays to cook your meals. [Robert] and his daughter turned an old satellite dish into a solar cooker. The image above shows them baking some potatoes, but the temperatures inside the cast iron vessel are high enough to let you cook most foods.

The dish was originally used for satellite television but has been collecting dust in the shed for quite some time. When [Robert] came across a roll of foil tape in his workshop he decided to give the project a whirl. His daughter helped out by peeling away the tape backing (this can be much harder than it sounds) while he applied the reflective material trying to keep it free of wrinkles. After a close call [Robert] donned a pair of welding goggles when positioning the dish. If the light intensity can get the pot up as high as 428 degree Fahrenheit we’re sure it can cause flash blindness.

Unlike other dish cookers we’ve seen, [Robert] didn’t use the original mount for holding the dish in place. He just set it on three bricks and directed it by hand. To keep the intensity focused on the kettle he had to reposition it every 15 minutes.

We wonder if the heat is too much for building a sun tracking solar power harvester?

OCR Automatically Reads A Power Meter

January 3, 2013 by Mike Szczys 10 Comments

ocr-used-to-read-a-power-meter

[Chris] tried his hand at using Optical Character Recognition in his server power monitoring rig. The image above is what the IP camera used in the setup sees. He’s included a bright light to ensure that the contrast is as great as possible. After applying a threshold filter to the captured still, he is able to process the image to test all seven segments of every digit.

He uses Mathematica for the processing. We’re not familiar with the particulars of the language, but it’s easy enough to see the main parts of the program. Line six of his source code applies the image filters and then the program loops through the assigned location of each digit, testing segment combinations to ascertain what number is shown. Things get hairy when it comes to the decimal point. We gather that the meter can show varying degrees of precision based on the total number of digits needed (like a Digital Multimeter). But [Chris’] setup has a difficult time reliably detecting that decimal point because of its size. He uses a shortcut to get around this, knowing that his server never pulls less than 300W so he corrects the output (by multiplying it by ten) if the reading is below that benchmark.

Of course it would be easier to crack open the monitor and glean data electronically (that’s how the Tweet-A-Watt does it) but then [Chris] wouldn’t have had the fun of playing with OCR.