DIY Peristaltic Pump Keeps The Booze Flowing

February 20, 2018 by Kristina Panos 30 Comments

A few months ago we showed you a bar bot built by [GreatScott] that uses peristaltic pumps to food-safely move the various spirits and mixers around behind the curtain. The bar bot uses three of them, and at $30 each for pumps with decent flow rate, they added a lot to the parts bill. These pumps are pretty much the ideal choice for a bar bot, so what do you do? [GreatScott] decided to see if it was worth it to make them instead.

Peristaltic pumps are simple devices that pump liquids without touching them. A motor turns a set of rollers that push a flexible tube against a wall. As the motor turns, the rollers move liquid through the tube by squeezing it flat from the outside in turns. Typically, the more you pay for an off-the-shelf peristaltic, the higher the flow rate.

[GreatScott] figured it was cheaper to buy the motor and the control circuitry. He chose a NEMA-17 for their reputation and ubiquity and a DRV8825 controller to go with it. The pump is driven by an Arduino Nano and a pot controls the RPM. After trying to design the mechanical assembly from scratch, he found [Ralf]’s pump model on Thingiverse and modified it to fit a NEMA-17.

The verdict? DIY all the way, assuming you can print the parts. [GreatScott] was trying to beat the purchased pumps’ flow rate of 100mL/minute and ended up with 200mL/minute from his DIY pump. Squeeze past the break for the build video and demonstration.

Is there a bar bot build on your list? No? Is it because you’re more of a single-malt scotch guy? Build a peristaltic pachyderm to pour your potion.

Continue reading “DIY Peristaltic Pump Keeps The Booze Flowing” →

Open Source Barbot Needs Only Two Motors

August 31, 2017 by John Baichtal 16 Comments

Most drinkbots are complicated—some intentionally so, others seemingly by design necessity. If you have a bunch of bottles of booze you still need a way to get it out of the bottles in a controlled fashion, usually through motorized pouring or pumping. Sometimes all thoe tubes and motors and wires looks really cool and sci fi. Still, there’s nothing wrong with a really clean design.

[Lukas Šidlauskas’s] Open Source Barbot project uses only two motors to actuate nine bottles using only a NEMA-17 stepper to move the tray down along the length of the console and a high-torque servo to trigger the Beaumont Metrix SL spirit measures. These barman’s bottle toppers dispense 50 ml when the button is pressed, making them (along with gravity) the perfect way to elegantly manage so many bottles. Drink selection takes place on an app, connected via Bluetooth to the Arduino Mega running the show.

The Barbot is an Open Source project with project files available from [Lukas]’s GitHub repository
and discussions taking place in a Slack group.

If it’s barbots you’re after, check out this Synergizer 4-drink barbot and the web-connected barbot we published a while back.

Continue reading “Open Source Barbot Needs Only Two Motors” →

Drinking With Your Robot

January 11, 2016 by James Hobson 26 Comments

We’ve seen tons of bartending robots before, but we’re not sure we’ve ever seen a robot that actually drinks with you… Until now anyway.

Designed and built by a South Korean inventor, [Eunchan Park], he built this robot to drink with, quite literally.

The story goes that he tried drinking alone in 2012 because he did not have a girlfriend at the time. He didn’t enjoy drinking alone and promptly stopped. But then recently he tried drinking with two glasses on the table, and cheers himself when drinking. According to him, the alcohol tasted much better that way, which drove him to build Drinky, the Alcohol Drinking Robot.

Continue reading “Drinking With Your Robot” →

In Soviet Russia, Drink Serves You

November 17, 2015 by James Hobson 10 Comments

There’s just something about having an automatic bartending machine that screams “we’re in the future now” — and it’s a future we approve of. This project is called the Alkomat (Google Translate), and it’s a handy little machine capable of mixing drinks for five people at a time.

Inspired by the RumBot, [Strn] wanted to practice his hand at hardware integration and product development from idea to creation — and just looking at some of the photos of this, he did a damn good job.

On the inside of Alkomat is a recycled inkjet XY carriage which can index on each of the five drinks. A series of four tubes feed up to peristaltic pumps that provide alcohol from the bar rack. Once he had the hardware sorted out and operational, he set out to make the machine look as presentable as possible. Using a mixture of counter-tops and laminated wood panels from furniture, he’s boxed up the whole thing and made it look like something you might actually be able to buy from a store — maybe IKEA?

Continue reading “In Soviet Russia, Drink Serves You” →

Margarita Drip Infuser Ensures A Perfect Mix

October 14, 2014 by James Hobson 13 Comments

In order to get a margarita just right, the various ingredients need to be mixed together quite vigorously to over-come the different viscosity of the fluids. Looking to create his own barbot of sorts, [TVMiller] decided to make a Margarita Drip Infuser to help make margaritas a bit easier.

Using various chem lab supplies, [TVMiller] has cobbled together something pretty awesome. The Infuser can take up to 8 different ingredients into its test tube reserves, and after the drink ingredients are programmed on the computer, the magic begins.

An Arduino Uno controls a bank of 8 relays which control small fluid solenoids, with each control pulse releasing just a single droplet of fluid. An LED for each valve is run in parallel adding a bit of a light show to the mixing experience. If that’s not enough, he’s also created a copper cooling coil to chill the drink as it is poured.

Continue reading “Margarita Drip Infuser Ensures A Perfect Mix” →

Arduino Drink Dispenser Turns Quarters Into Liquid Courage

October 5, 2014 by James Hobson 6 Comments

Ever feel the need to have your very own alcohol vending machine at home? Well if you do, [Ben] and [Dan] have just the Arduino based machine for you!

It was actually part of a school assignment for product design at Brunel University – the whole thing was designed and built in just over a week. The machine accepts and counts coins giving you a total readout on the LCD screen. When the correct amount is inserted you can select your shot and the machine will pour you a stiff one.

The thing we like about this vending machine — we’re not sure if it actually qualifies as a barbot — is that it doesn’t have any fancy pumps. In fact, it just uses two inexpensive solenoid valves and gravity to dispense the drink, much like a typical bar bottle dispenser.

Continue reading “Arduino Drink Dispenser Turns Quarters Into Liquid Courage” →

Synergizer: The Emergency Key-Turn Barbot

May 25, 2014 by James Hobson 10 Comments

Synergizer: Emergency Drink Dispenser

It’s been a rough day at the office. You need a break. But by yourself? No, what you need is to be Synergized! This Barbot only works if all four keys are inserted and turned — kind of like a nuclear launch procedure — only then will it dispense four perfectly sized drinks to make your day better.

The Synergizer uses an Arduino to control a belt driven linear actuator which moves the spout from cup to cup. A series of reed switches along the length provide feedback to the system for positional control. The machine makes use of a peristaltic pump, called the Bartendro Dispenser, which pumps an exact volume of your liquid of choice into each cup. The cool thing with peristaltic pumps is they are self priming,and capable of pumping an exact volume of liquid every time.

[Nick Poole], the designer, also included a CPU fan and heat-sink paired up with a peltier plate in order to also chill the liquid as it is being pumped. To make it even more interesting, he added a four key override, so the Synergizer can only be used if all four unique keys are inserted.

Continue reading “Synergizer: The Emergency Key-Turn Barbot” →