Hackaday Podcast 237: Dancing Raisins, Coding On Apples, And A Salad Spinner Mouse

This week, Editor-in-Chief Elliot Williams and Kristina Panos gathered over the Internet and a couple cups of coffee to bring you the best hacks of the previous week. Well, the ones we liked best, anyhow.

First up in the news, we’ve got a brand-spankin’ new Halloween Hackfest contest running now until 9AM PDT on October 31st! Arduino are joining the fun this year and are offering some spooky treats in addition to the $150 DigiKey gift cards for the top three entrants.

It’s a What’s That Sound Results Show this week, and although Kristina actually got into the neighborhood of this one, she alas did not figure out that it was an MRI machine (even though she spent a week in an MRI one day).

Then it’s on to the hacks, which had a bit of a gastronomical bent this week. We wondered why normies don’t want to code on their Macs, both now and historically. We also examined the majesty of dancing raisins, and appreciated the intuitiveness of a salad spinner-based game controller.

From there we take a look at nitinol and its fun properties, admire some large, beautiful Nixie tubes, and contemplate a paper punching machine that spits out nonsensical binary. Finally we talk about rocker bogie suspensions and the ponder the death of cursive.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download and savor at your leisure.

Continue reading “Hackaday Podcast 237: Dancing Raisins, Coding On Apples, And A Salad Spinner Mouse”

Hackaday Podcast 236: The Car Episode, Building Leonardo’s Water Mill, Reviving Radio Shack

Elliot and Dan got together this time around to recap the week in hacks, and it looks like the Hackaday writing crew very much had cars on their minds. We both took the bait, with tales of privacy-violating cars and taillights that can both cripple a pickup and financially cripple its owner. We went medieval — OK, more like renaissance — on a sawmill, pulled a popular YouTuber out of the toilet, and pondered what an animal-free circus would be like. Is RadioShack coming back? Can an ESP32 board get much smaller than this? And where are all the retro(computer)virus writers? We delve into these questions and more, while still saving a little time to wax on about personal projects.

And although the show is peppered with GSM interference for the first few minutes it’s not actually a clue for the What’s That Sound. (Elliot says sorry!  And edited most it out by swapping over to the backup recording for most of the rest of the show.)

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download it yourself if that’s your jam.

Continue reading “Hackaday Podcast 236: The Car Episode, Building Leonardo’s Water Mill, Reviving Radio Shack”

Hackaday Podcast 235: Licorice For Lasers, Manual Motors, And Reading Resistors

Name one other podcast where you can hear about heavy 3D-printed drones, DIY semiconductors, and using licorice to block laser beams. Throw in homebrew relays, a better mouse trap, and logic analyzers, and you’ll certainly be talking about Elliot Williams and Al Williams on Hackaday Podcast 235.

There’s also contest news, thermoforming, and something that looks a little like 3D-printed Velcro. Elliot and Al also have their semi-annual argument about Vi vs. Emacs. Spoiler alert: they decided they both suck.

Missed any of their picks? Check out the links below, and as always, tell us what you think about this episode in the comments!

Download it yourself. You can even play it backwards if you like.

Continue reading “Hackaday Podcast 235: Licorice For Lasers, Manual Motors, And Reading Resistors”

Hackaday Podcast 234: Machines On Fire, Old Kinect New Kinect, And Birth Of The Breadboard

It might sound like a joke, but this week, Elliot Williams and Tom Nardi start things off by asking how you keep a Polish train from running. Like always, the answer appears to be a properly modulated radio signal. After a fiery tale about Elliot’s burned beans, the discussion moves over to the adventure that is home CNC ownership, the final chapter in the saga of the Arecibo Telescope, and the unexpected longevity of Microsoft’s Kinect. Then it’s on to the proper way to cook a PCB, FFmpeg in the browser, and a wooden cyberdeck that’s worth carrying around. Finally, they’ll go over the next generation of diode laser engravers, and take a look back at the origins of the lowly breadboard.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download it yourself. You don’t need the cloud!

Continue reading “Hackaday Podcast 234: Machines On Fire, Old Kinect New Kinect, And Birth Of The Breadboard”

Hackaday Podcast 233: Chandrayaan On The Moon, Cyberdecks, Hackerspaces Born At A German Computer Camp

This week, Editor-in-Chief Elliot Williams and Kristina Panos experimented with the old adage that brevity is the soul of wit. That’s right; this week, they’re all Quick Hacks, and that’s to make room for a special series of interviews that Elliot recorded at CCCamp with the pillars of US hackerspace creation. This one’s really special, do have a listen.

We still made room for the news this week: India launched Chandrayaan-3, which combines an orbiter, lander, and rover all in one. Then it’s on to the What’s That Sound results show, and while Kristina did not get it right, she did correctly identify it as being used in Whitney Houston’s “I Wanna Dance With Somebody”, as did one of the guessers who identified it as the cowbell sound from a Roland 808.

Then it’s on to the (quick) hacks, where we alternated for once just to keep things interesting. This week, Elliot is into 3D printing a clay extruder and then printing pottery with that, z-direction conductive tape, and the humble dipole antenna. Kristina is more into cyberdecks for the young and old, a reusable plant monitor, and 3D printing some cool coasters.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download and savor at your leisure.

Continue reading “Hackaday Podcast 233: Chandrayaan On The Moon, Cyberdecks, Hackerspaces Born At A German Computer Camp”

Hackaday Podcast 231: Harnessing Sparks, Hacking Food, And Leaving Breadcrumbs

Editor-in-Chief Elliot Williams and Al Williams don’t always agree on the best text editor to use, but they do — usually — agree on what makes a great hack. This week, they found plenty of Hackaday posts to discuss, ranging from exotic eavesdropping on keyboards, oscilloscopes, and several posts of interest to anyone who wants to build good-looking prototypes. If you are like mechanics, you’ll hear about an escapement-like mechanism and a Hobson’s coupler. If you crave more traditional hacks, you can learn more about maximizing battery life and etching PCBs.

In addition to a flurry of hacks, Elliot and Al also share their picks for the best original posts from Hackaday’s staff. This week, we find out how Arya Voronova documents projects and hear what Tom Nardi thinks of his Beepy — a ready-made display and Blackberry keyboard waiting for a Raspberry Pi.

Did you miss anything? Check out the links below. Be sure to send your favorite hacks our way, and let us know in the comments how you liked this episode. Hear it here:

Or download it yourself and listen while testing room-temperature superconductors!

Continue reading “Hackaday Podcast 231: Harnessing Sparks, Hacking Food, And Leaving Breadcrumbs”

Hackaday Podcast 230: Space Science, Superconductors, Supercaps, And Central Air

This week, Editor-in-Chief Elliot Williams and Managing Editor Tom Nardi start things off by tackling a pair of science stories, one that may or may not change the world, and the other that hopes to help us understand the very fabric of the universe. Afterwards they get to the important stuff: the evolution of Game Boy Camera hacking, the finer points of 3D print orientation, and mixing up electrically conductive concrete at home. From there the conversation shifts to a couple of 486 Turbo buttons, a quick yoke recipe, and a very handsome open source vacuum pickup tool. Stick around until the end to hear about the folly of humanoid robots, and the latest operating system to get the Jenny List treatment.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Or download it yourself in fantastic MP3 format!

Continue reading “Hackaday Podcast 230: Space Science, Superconductors, Supercaps, And Central Air”