MRRF: ARM-Based CNC Controllers

March 17, 2014 by Brian Benchoff 23 Comments

8-bit microcontrollers are the standard for RepRap electronics, but eventually something better must come along. There has been a great deal of progress with ARM-based solutions, and of course a few of these made a showing at the Midwest RepRap Festival.

First up is [Mark Cooper], creator of Smoothieboard, the ultimate RepRap and CNC controller. It’s an ARM Cortex-M3 microcontroller with Ethernet, SD card, and up to five stepper drivers. It had a Kickstarter late last year and has just finished shipping all the rewards to the backers. In our video interview, [Mark] goes over the functions of Smoothieboard and tells us about some upcoming projects: the upcoming Smoothiepanel will feature a graphic LCD, SD card, rotary encoder and buttons, all controlled over USB by the Smoothieboard.

Next up is [Charles] with a whole bunch of CNC capes for the Beaglebone. By far the most impressive board was a huge I/O expander, motor driver, and everything controller for a Beaglebone featuring – get this – three parallel port interfaces. This was a one-off board costing thousands of dollars, but [Charles] did show off a few smaller and more practical boards for Beaglebone CNC control. Here’s a link to [Charles]’ capes.

Videos below.

Continue reading “MRRF: ARM-Based CNC Controllers” →

MRRF: 3D Printed Resin Molds

March 16, 2014 by Brian Benchoff 26 Comments

Visiting the Midwest RepRap Festival, you will, of course, find a ton of 3D printed baubles and trinkets. A slightly more interesting find at this year’s MRRF was a lot of resin cast parts from [Mark VanDiepenbos]. He’s the guy behind the RotoMAAK, a spinny, ‘this was in the movie Contact‘-like device designed for spin casting with resins. At the festival, he’s showing off his latest project, 3D printed resin molds.

With the right mold, anyone with 2-part resins can replicate dozens of identical parts in an hour. The only problem is you need a mold to cast the parts. You could print a plastic part and make a silicone mold to cast your part. The much more clever solution would be to print the mold directly and fill it with resin.

[Mark] printed the two-part rabbit mold seen above out of ABS, filled it with urethane resin, and chucked it into his RotoMAAK spin casting machine. Six minutes later the part popped right out, and the mold was ready to make another rabbit.

Video below.

Continue reading “MRRF: 3D Printed Resin Molds” →

MRRF: CoreXZ

March 15, 2014 by Rich Bremer 13 Comments

It is mid-day Saturday and the Midwest RepRap Festival is in full swing. Saying that there is a lot of 3D printers here is an extreme understatement. There must be at least 100. Out of all these, there are a couple that stand out from the rest due to their non-standard geometry. These are both creations of [Nicholas Seward], called the Wally and Simpson.

Both of these printers were designed to not use linear rails or bearings and be as reprap-able as possible. For example, the Simpson’s only non-printed custom parts are the two wooden base plates and the print bed. The rest of the parts are general hardware and standard 3D printer electronics.

[Nicholas] is showing off something new this weekend (less than 2 weeks new, actually). It is a new printer, currently code named CoreXZ. Unlike his previous designs, the CoreXZ does use linear rails and bearings. The frame is laser cut and is held together with zip ties. This new design uses an h-bot style setup for movements in the X and Z axes. The Y axis is a standard moving bed design with linear rails and bearings.

Continue reading “MRRF: CoreXZ” →

Midwest RepRap Festival: 3D Printed Waffles

March 14, 2014 by Brian Benchoff 5 Comments

Hackaday is settling in with the action at the Midwest RepRap Festival in Goshen, Indiana. Already it’s turning out to be a great weekend; an hour after the doors opened at 6:00 pm on Friday, with a freight train blocking traffic for half the town, there were more than 100 people through the doors. I have since stopped counting.

As far as who’s here, Lulzbot, the guy behind the Smoothieboard, Ultimaker, [Josh] from MakerJuice, [Jo Prusa], [Nicholas Seward], creator of the RepRap Wally, Gus, and Simpson, and the folks from MakerHive and Maker’s Tool Works.

Everybody is having tons of fun and I’m currently giving away Hackaday T-shirts in return for a contribution to the beer fund. The real show starts Saturday morning with a waffle breakfast, talks from famous reprappers, and hours and hours of fun.

Pics of some cool stuff below, here are two live streams, videos of awesome stuff up tomorrow.

Continue reading “Midwest RepRap Festival: 3D Printed Waffles” →