Hackaday gets results! Reader [John] saw our recent Fail of the Week post about a “sand matrix printer” and decided to share his own version, a sand-dispensing dot matrix printer he built last year.
Granted, [John]’s version is almost the exact opposite of [Vjie Miller]’s failed build, which sought to make depressions in the sand to print characters. [John]’s Sandscript takes a hopper full of dry, clean sand and dispenses small piles from six small servo-controlled nozzles. The hopper is mounted on a wheeled frame, and an optical encoder on one wheel senses forward motion to determine when to open each nozzle. As [John] slowly walks behind and to the side of the cart, a line of verse is slowly drizzled out onto the pavement. See it in action in the video below.
More performance art piece than anything else, we can see how this would be really engaging, with people following along like kids after the [Pied Piper], waiting to find out what the full message is. There’s probably a statement in there about the impermanence of art and the fleeting nature of existence, but we just think it’s a really cool build.
We’ve featured other sand writers before, like this high-resolution draw bot that also dispenses sandy verses, or this literal beach-combing art bot. Guess there’s just something about sand that inspires artists and hackers alike.
Ultrafire batteries. Be careful with those.
not as bad as the ultrofite batteries which is a rip off of ultrafire batteries if you can believe it.
Really why would they do this.
Why? To further increase the entropy in the universe in both name and product. Eventually I see a product that is roughly cylindrical, stores no electricity, and is called “ulrofi”. Then later just a formless blob of undisclosed substance called the “uhh” :-)
It would be great to print warnings on icy roads.
Needs salt
I dig it…get it? Sand? Dig san–any who. +1 for cardboard. John gets it – results trumps vanity.
As a cyclist: this guy can go F himself. Sand, especially on curved parts of roads / paths, equals broken collarbones/wrists.
Printing on the road in the video was not if a thoroughfare and was cleaned up after the video.
Thanks however for pointing out the risk as it could be an issue if placed incorrectly. I make sure choose locations where walkers or bikes will not slip and get approval from the local council.
A little sand really shouldn’t hurt or deter a cyclist. It might cause an issue if you try to corner at high speeds, but that’s on you. There are many bicycle paths that use sand in some way, sand-like materials or are found in sand rich environments. None of those are known to be very hazardous.
It might be cool to fill the hopper with fertilizer and print on a closely mown lawn.
Bet the Inca wish they’d had something like this when making the Nazca figures, even though that wasn’t an additive process. :-)