CNC Conversions With [Bob]

April 7, 2012 by Caleb Kraft 6 Comments

[Bob Berg] emailed in to request that we take a look at his website. We did, and we liked what we saw! [Bob] has done a couple CNC mill conversions and documented the process quite thoroughly.

The first one listed on his site is a Sieg x-3, seen above. [Bob] explains that the first thing he did when he received it was tore it apart and cleaned it meticulously. We’re not sure if [Bob] was being insanely neat, or if he bought a used dirty unit. Either way, you can’t argue that a nice clean machine is the way to start. After a short while using it the way it was, he added a digital read out for a little more accuracy. From there, he went for a fully motorized conversion.

Keep looking around his site. There is another full build (a lather master RF45) as well as some miscellaneous other projects that are quite interesting.

Make Your Own Atomic Clock

March 24, 2012 by Caleb Kraft 30 Comments

We see plenty of clock projects come through, but usually it is their visual or mechanical design that stands out. The DCF-77 LED PIC clock is fun because it is synchronized with the Atomic clock in Braunschweig Germany. The clock picks up the radio signal at 77.5 KHz known as DCF77, and that’s where it got its name.

The circuit looks surprisingly simple and usually costs less than $30 to build, depending on how you piece it together. You can download the schematics and code from the site, but you may have to do a little research about how to catch the signal from your location. The person who wrote this was located in Europe.

[found via HackedGadgets]

Following Faces With OpenCV And Arduino

March 24, 2012 by Caleb Kraft 9 Comments

[youtube=http://www.youtube.com/watch?v=lD4uFD7j0AU&w=470]

[Marco] has had some fun with OpenCV in the area of face tracking. Using an older laser project, he has cobbled together a system that will track a face and put a laser on it. While he is just using this as a proof of concept, it goes without saying that you probably shouldn’t mount a laser on a face tracker. However, stuffing this into a myKeepon wouldn’t be a horrible thing.

[Marco] shares the process of getting the OpenCV bit working in this writeup, you’ll have to refer back to his laser gun project for the physical build.

[via Adafruit]

Brewtarget: Open Source Homebrewing

March 13, 2012 by Caleb Kraft 14 Comments

[youtube=http://www.youtube.com/watch?feature=player_embedded&v=BEdkZIUkvA4]

Several of us here at Hackaday Brew our own beer. Needless to say, we got a little excited when we saw members of the open source community building a brew tracking system. Brewtarget is an open source tracking system that you could download right now and begin tracking and building your recipes. It looks like there is a fairly active development group working on it and even a feature request form that seems to be filling up. Maybe we overlooked it, but there doesn’t seem to be an existing feature list. We look forward to seeing where this project goes.

Brewtarget implements BeerXML, which means it should also be compatible with Beershmith, a commercial application.

[via adafruit]

Bringing The Stars To Your Baby

February 19, 2012 by Caleb Kraft 35 Comments

[Zach] saw a stuffed animal that projected some simple stars on the ceiling. This gave him an idea that he could build a tiny star projector for his 3 month old daughter’s room. The idea is to put an LED inside a ping pong ball with tiny holes and rotate it slowly.

The electronics are fairly strait forward. He’s using an MSP430 to control the servo and LED, allowing him to set different speeds and turn the whole thing off after a certain amount of time. The ball took a little bit of trial and error though. He first started by drilling some holes, but found this to give poor results. The holes were just too big. He finally ended up heating up a sewing needle and melting tiny holes in the ping pong ball. That worked perfect.

After the break you can see a video of it moving. The servo is pretty loud, which might actually be a good distraction for a 3month old, but might be something to address in the future.

Continue reading “Bringing The Stars To Your Baby” →

The PANIC Button Saves You From Bad Music

February 19, 2012 by Caleb Kraft 15 Comments

Having a communal music collection being played on random can be really fun. You experience new music and get to hear old favorites. However, not everyone shares the same taste. Sometimes, you absolutely need to just skip the song coming on, for the sake of everyone involved. That was how the Panic button was born.

Starting with a joke panic button that would play an alarm sound, they promptly tore the guts out. They inserted a minimus board, which has an AT90USB162 its brain, and includes onboard USB hardware. When you slap the panic button, it emulates the key press that goes to the next track, thereby saving everyone from whatever monstrosity was threatening their ear drums.

Stop The Internet Blacklist Legislation

January 18, 2012 by Caleb Kraft 210 Comments

It doesn’t take much imagination at all to see what a horrible effect this censorship could have on sites like Hackaday. Please do your part to stop internet censorship.

Imagine how many companies would rather us not share with you how our brilliant readers have hacked their hardware to do bigger and better things than they were sold to do. Sites like Hackaday would not survive this censorship.