SNES Arcade Controller

January 30, 2011 by Caleb Kraft 22 Comments

[Daniel] is making a mini arcade cabinet with an SNES housed inside. He wanted to build an arcade controller for it and chose to construct something from scratch instead of destroying an original piece of hardware. We can almost feel you guys sighing with relief at that one. He sent us some nice photos of his build and pointed out that he’s using one of the Evilmadscientist AVR boards housing an ATtiny2313. The arcade buttons are readily available at sparkfun. The source code for this project is available after the break.

Continue reading “SNES Arcade Controller” →

All That’s Needed Is A Retro Paintjob, MiniMAME

July 22, 2010 by Jakob Griffith 22 Comments

[Tim’s] miniMAME‘s construction follows the “light and cheap” approach, using foam core board and hot glue. Sure it won’t last a nuclear attack, but at least it’s light enough to carry to a friend’s house.

With a removable netbook at the core, CCFLs, speakers, trackball, and mini arcade fighting stick, the project completely surpassed our expectations. For those looking to build a miniMAME, [Tim] includes lots of pictures, details, and plans allowing anyone to make their own in about an afternoon.

Mini Racing Cabinet

July 6, 2010 by Mike Szczys 10 Comments

Here’s another small arcade cabinet. This time around it’s the racing simulator Daytona USA. [Pocket_lucho’s] cabinet work has been featured before and he did some fine work with the control interface on this build. The wheel is from the controller of an RC car and the gear lever from a heavily used toy. He fashioned two pedals using gate hinges and a couple of leaf switches. The guts pack quite a punch with a mini ITX motherboard running the show. This will look great next to Ms. Pac-Man. Check out the video after the break.

Continue reading “Mini Racing Cabinet” →

The Mini-Markade

February 16, 2010 by Caleb Kraft 28 Comments

We love arcade games. Who doesn’t? We feel that the “arcade” feeling just can’t be replicated in any other form factor than an arcade cabinet. [Moslevin] must feel the same way too. He has built, what could possibly be the worlds smallest arcade cabinet. Aside from a coin mechanism, it is fully functional. It is an ATMega328p running his own custom software. The games he has available are Tetris, Invader, and Breakout, all coded by himself as well. We’ve seen small arcade cabinets before, but none this small.

Mini MAME Cabinet

September 4, 2009 by Mike Szczys 10 Comments

[luis] added to the collection of MAME projects we’ve covered with his mini MAME cabinet build. This is his 5th mini cabinet and features a 5″ PlayStation LCD screen, a joystick, four control buttons, player 1 and 2 start buttons, speakers, and a lighted marquee. The controls are interfaced through an I-PAC and the system running the whole thing is a mini-ITX board with an Atom processor and two gigs of RAM. The build log is in Spanish and takes us all the way from a cardboard prototype to the finished particle board cabinet full of high quality artwork.

Continue reading “Mini MAME Cabinet” →

Hackaday Podcast 046: Bring Us Your Nonsense, Hacking NES Clones, Grasping FPGAs, Many A Music Hack, And Fish Tanks Full Of Random

December 13, 2019 by Mike Szczys 4 Comments

Difference of two Vikram moon images, contrast tweaked.

Hackaday editors Elliot Williams and Mike Szczys highlight the most delightful hacks of the past week. Need a random-number showpiece for your office? Look no further than that fish tank. Maybe the showpiece you actually need is to complete your band’s stage act? You want one of Tristan Shone’s many industrial-chic audio controllers or maybe just a hacked turntable sitting between your guitar and amp.

Plus citizen science is alive and well in the astronomy realm, and piezo elements are just never going to charge your electric vehicle.

Take a look at the links below if you want to follow along, and as always tell us what you think about this episode in the comments!

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (60 MB or so.)

Continue reading “Hackaday Podcast 046: Bring Us Your Nonsense, Hacking NES Clones, Grasping FPGAs, Many A Music Hack, And Fish Tanks Full Of Random” →

Toy Dash Turned Gaming Interface

August 30, 2017 by John Baichtal 15 Comments

We see a lot of MAME cabinets and other gaming emulator projects here on Hackaday, but it’s not often that we see one the form factor of which so elegantly matches the ROM. [circuitbeard] converted a Tomy Turnin Turbo toy dashboard into a mini arcade machine playing Outrun.

There are many fascinating details in [circuitbeard]’s writeup. His philsophy is to “keep it looking stock” so he went to great lengths to add functionality to various elements of the toy without changing its appearance. The gear shifter was turned into a 3-way momentary switch with high and low speeds at top and bottom, with rubber bands pulling the switch back the center (neutral) when he lets go of it. The original toy’s steering wheel mounts to a slide potentiometer. The dash has a working ignition switch that uses a PowerBlock to manage the safe startup and shutdown of the Pi. The dash also lights up the way you’d expect, and even displays accurate MPG and rev info.

For more MAME goodness here on Hackaday, see this broken tablet turned into a mini MAME cabinet or the portable MAME system of the future

Continue reading “Toy Dash Turned Gaming Interface” →