The transform switch on a mixer is used to turn ON and OFF individual channels. The toggle switches used in the DJM-707 are three position switches, but their plastic caps limit them to only two positions. [Sp4rk] removed the switches from the unit, wired the other off position, and trimmed the cap. After this modification the switches have an OFF-ON-OFF motion. Here’s an MP3 of Sp4rk scratching with the new modification and a Coral cache of the transform modification.
Backlights are one of the most common failure points on LCD panels. Even though they usually say “no serviceable parts” on the back you might still be able to fix your monitor. Jared Bouck details the removal of the dead cold cathode and replacing it with a new tube and inverter. Not quite as dangerous as opening a CRT, but you still need to be careful with the mercury vapor filled tubes.
[thanks Tom]
[Aj] found this great article for building a really cheap microscope. The goal of the project is to construct a compound microscope that is superior to the cheap toy/children’s microscopes. Besides standard construction materials it uses the lenses from four disposable cameras. The article also covers a lot of possible improvements to the ‘scope: focus control, fine focus control, condensers, different eyepieces.
Jason wanted a simple underwater housing for his cheap X10 camera. He decided to add IR illumination and thrusters to move it around. Before he knew it he had a simple PVC remote operated vehicle on his hands. The lights and camera are housed in the upper PVC tubes. Six 12V bilge pumps are located below for directional control.
[jcoxon] was inspired by the original Linux weather balloon project. His Pegasus 1 reached an altitude of 66,585ft and took over 600 pictures. The flight logging system is based on the Gumstix waysmall computer system. It captures data from the GPS receiver and controls two cameras. There are photos from both a downward facing camera and a side facing camera. Periodically the last three GPS entries are sent to Jame’s cellphone via SMS; this made recovering the payload a lot easier. There is already a second baloon planned.
I wasn’t planning on posting this, but in light of recent events I think I have to. Yep, we completed 2,000,000 points in half the time it took to get the first million. Celebrate over at the unofficial Team Hack-A-Day forum.
Russ W. Moore of Bad Brothers Racing has an awesome project on his hands. The motorcycle frame is from a Yamaha YSR-50. Smaller than a standard street bike and larger than a pocket bike it comes with a 50cc engine and is street legal. The gas turbine is being constructed from a Cummins ST-50 usually found in large trucks. The documentation is pretty thorough and covers the build from the beginning. It’s still in progress, the exhaust and pumps still need to be mounted, possibly a starter too. The ECU will be a Basic Stamp II. See, you don’t need to be Jay Leno or have 150K to have your own jet bike.
[thanks arocketman]
