Gritz: An Open Source Speed Reading Tool

March 3, 2014 by Eric Evenchick 43 Comments

Here’s a hack to help you increase your reading speed. Gritz is an open source text file reader, which reduces the need to look around the screen. Words pop up one at a time, but at a configurable pace.

[Peter Feuerer] got the idea for Gritz from Spritz, a commercial product for speed reading. The creators of Spritz took three years to develop their software, and recently released a demo. They claim people can read at 1000 WPM using this technology. Spritz is taking applications for access to their APIs, which will allow developers to integrate the software into their own applications. However, a fully open source version with no restrictions would be even better.

Using Gritz, [Peter] claims to have read a book with a 75% improvement in his reading speed. He admits it’s not perfect, and there’s still much development to do. Gritz is written in Perl, uses Gtk2 for its GUI, and comes with instructions for running on Linux, OS X, and Windows. It’s released under the GPL, so you can clone the Github repo and start playing around with accelerated reading.

This Desktop Air Conditioner Is Really Cool!

March 2, 2014 by Kristina Panos 96 Comments

[Mike] works in a 50+ year old building with unreliable air conditioning. It often reaches 80°F inside during the summer, and he once measured it at 98°F. Rather than burn sick days, he became the envy of the office when he built this awesome desktop air conditioner.

The problem with knocking holes in the office walls and installing window units is that they must vent heat somewhere. [Mike] has overcome adversity and harnessed the power of the heatsink, only in reverse. His desktop a/c unit is made from two 28oz cans plus a 20oz can for the ice bucket. [Mike] used a side-vented CPU fan, which is vital to his design. He secured the heatsink to the base of one 28oz can with a self-tapping screw. This can is the upper chamber. [Mike] made a base from the other 28oz can, drilling holes for the CPU fan wires, the power cord, and a sweet light-up rocker switch. He used Gorilla Glue to affix the CPU fan to the base can.

Hot, stale office air is drawn through the ice in the 20oz can, which is nestled in aluminum foil to maximize heat transfer to the heatsink. The heat in the air gets absorbed by the heatsink, and the CPU fan kicks out cool air in 20-30 seconds.

Hack All The Things In The Time You Save With This LED Pomodoro Timer

February 9, 2014 by Kristina Panos 36 Comments

Do you want to use your time more productively but are tomato-averse? [Robin]’s LED Pomodoro timer could be the perfect hack for you.

The Pomodoro Technique is a time management solution developed in the late 1980s. The basic idea is to spend a very focused 25 minutes performing some activity such as working or studying and then take a 5-minute break. Many of its proponents use a tomato-shaped kitchen timer to alert them to switch between the two states, but [Robin] wanted to make his own and learn along the way.

First, he wanted to use an ATtiny85 and learn about its features. Specifically, he used its timers, PWM, and low-power sleep mode. [Robin] used Charlieplexing to drive a total of six LEDs. When the timer starts, five yellow LEDs are driven high to indicate each 5-minute slice of work time. A red LED is lit during the 5-minute break.

[Robin] also explored compact PCB design and fabrication. All components are SMD and his board is 4cm square. [Robin] is using this SMD buzzer for discrete feedback. He included a footprint for a six-pin ISP header and programmed it with pogo pins. The timer is completely interrupt-driven: one click of the tactile button starts the work counter, and the buzzer sounds when time is up. A second click starts the break counter.

[Robin] has made everything available in his GitHub repo and encourages you to use it. Time’s a-wastin’!

Hacking An Escape From East Germany

February 2, 2014 by Kristina Panos 40 Comments

Some hacks are just for fun. Some make your job or your life easier. Once in a great while, a hack will save your family from an oppressive government. This is the kind of hack that [Günter] pulled off when he and [Peter] built a homemade hot air balloon to escape East Germany and the oppression of the Stasi in 1979.

Like many East Germans who weren’t in line with the Party, [Günter] found life unsatisfactory on his side of the Berlin Wall. Travel, job options, and freedom of expression were all severely limited. Aside from joining the Communist Party, the only option seemed to be escape to West Germany.

[Günter] and his wife [Petra] were inspired when [Petra]’s sister, who had escaped in 1958, came to visit. She brought with her a newspaper that covered the International Balloon Fiesta in Albuquerque, New Mexico. [Günter] and [Peter], whom he worked with, decided that they would conspire to build a hot air balloon capable of transporting them, their wives, and their four children across the border.

Theirs is an incredible story fraught with adversity. They ended up constructing three different balloons, all the while traveling further and further from home to avoid suspicion when buying large quantities of fabric. They had a lot of trouble finding the right propulsion method and ended up using pure oxygen. During the narrow window they had before [Günter] was due to report for military duty, the weather was unfavorable except for a short period after a front had passed through. They had no time for testing and just went for it.

Continue reading “Hacking An Escape From East Germany” →

Stop Traffic In This 7-Mode LED Running Jacket

January 27, 2014 by Kristina Panos 35 Comments

[Miria] was tired of tangling with bicyclists on her nighttime runs. It was obvious to her to illuminate herself, but she thought it would be really cool if the lights responded to her heart rate. The short summary that tipped us off is over at NYC Resistor, and [Miria] gives the gory details on her blog. The LEDs operate in seven different light modes that increase in speed proportionate to her heart rate.

She started the build around an Arduino but found that the compatible heart rate sensors were mostly optical and gave inaccurate readings. Since she was already using a Garmin GPS watch and heart rate monitor band, she decided to hack into the conversation between the two. Garmin uses the ANT protocol for this. While [Miria] found the documentation to be an effective sleeping pill, she also found that SparkFun has an ANT transceiver breakout board. Unfortunately, it’s been discontinued.

[Miria] continued undeterred, using the SparkFun board for prototyping. Her final version uses a Teensy 2.0 and this ANT transceiver in place of the ill-fated SparkFun board. She found an Energizer power pack that plugs directly into the Teensy and can power both Adafruit weatherproof LED strips for about an hour. Look both ways, and check out her demo after the break.

Continue reading “Stop Traffic In This 7-Mode LED Running Jacket” →

Disrupting Advertisement Agency Workers With Electric Shocks

December 18, 2013 by Mathieu Stephan 24 Comments

We hope this project will make you laugh as much as we did. For 4 hours, some Australian advertising executives agreed to be subjected to Electric Muscle Stimulation (EMS) controlled by people from all over the globe watching their reaction over the Internet. The public could disrupt their day with a click of a mouse. The user simply needed to go online, choose a live stream, click the ‘Disrupt’ button and watch as the EMS instantaneously zapped the volunteers. For each ‘disruption’, the company donated $1 to a local community.

The EMS hardware was designed to deliver up to 60V pulses and controlled using the MIDI protocol. The platform is powered by 8 AA batteries and receives zapping commands via UDP. Unfortunately, the resources can’t be found on the project’s webpage, but you can still have a look at the two videos embedded after the break. The total amount donated during this experiment was $5500!

Continue reading “Disrupting Advertisement Agency Workers With Electric Shocks” →

Your Resume All Cinched Up In LaTeX

July 11, 2013 by Mike Szczys 60 Comments

$latex-resume$

Engineers just do things differently, which is why this hack makes a lot of sense to us. Instead of choosing a platform like Open Office to maintain his resume [Campbell Hennessy] renders his employment and references using LaTeX.

We separate content from styling on the web all the time using CSS and content management systems (Hackaday uses WordPress). And with the online component of employment history and job applications becoming progressively more important it makes a lot of sense to prepare your CV accordingly.

LaTeX is a markup language that makes graphically pleasing typesetting effects a snap. We’ve seen it used to label resistor storage tubes and server side hacks to embed the markup in HTML. If you haven’t tried it out yourself just grab your resume (which probably needs updating anyway), a LaTeX rendering tool of your choice, crack those knuckles, and follow along with [Campbell’s] experience.