Horribly Complicated Electric Guitar Keyboard

April 12, 2013 by Mike Szczys 32 Comments

the-email-gutar

Gutarist, hacker, and mustache enthusiast [David Neevel] brought together way too many pieces of hardware in order to use his electric guitar as a computer keyboard.

So let’s dig into the house of cards he built for the project. It starts off with the guitar which has been fitted with an additional pickup to interface with a Roland GR-33 synthesizer pedal. That outputs a MIDI signal, which many hackers would have connected to the computer and parsed with a simple script. But not [David], he connected it to an Arduino via an optisolator. Well that’s not too ridiculous, right? Don’t you think he’ll just parse the MIDI signals and push them to the computer via the Arduino’s USB port? Wrong! He translates the MIDI signals into combinations for a big relay board which is emulating the key matrix of an old USB keyboard. But as you can see in the demo video after the jump it works quite well.

If you’re more of the drumming sort there’s an electric drum set version of this hack too.

Continue reading “Horribly Complicated Electric Guitar Keyboard” →

Guitar EQ Levels Trigger The Stage Lights

April 11, 2013 by Mike Szczys 11 Comments

guitar-eq-strobe-control

Even if your band hasn’t made it big yet it’s still a lot of fun to put on a great show. This hack will help you add lighting effects to performances without having to shell out for a lighting technician. [Phil] put together a hack that lets you trigger the lights by setting a volume threshold with a pedal switch.

After reading about the hack that adds an EQ display for a pedal board he got the idea to convert the concept as control hardware instead of just for feedback. Just like the visualization project he uses an MSGEQ7 chip which takes care of the audio analysis. He’s using this for electric guitar so he only monitors three or four of the outputs using an Arduino. He built the hardware into a foot pedal by mounting a momentary push button on the lid of the enclosure. Stepping on the button causes the Arduino to save the the current audio level. Whenever it reaches that threshold again it will switch on a mains relay to drive an outlet. In this case a strobe light turns on when he starts to rock out, which explains the bizarre image above. You can get a better feel for the theatrics by watching the clip after the break.

Continue reading “Guitar EQ Levels Trigger The Stage Lights” →

MIDI Pedal Project Looks As Good As It Sounds

April 10, 2013 by Mike Szczys 17 Comments

organ-pedal-midi-project

[Lee O’Donnell] is showing off his version of a MIDI organ pedal hack. We’ve been seeing a few of these lately. The organ pedals are a great stating point as they’re easy to patch into electronically, and are designed to take a beating from your feet and come out the other side no worse for wear. The build goes beyond one of our favorite MIDI pedal conversions in both features and finish.

An Arduino Nano pulls this project together. It scans the pedals constantly and converts the key presses into MIDI signals. But the design includes this fabulous looking front-end which [Lee] first prototyped in cardboard before cutting and bending his own Aluminum tread plate. A two-row character display provides a menu system, but the buttons themselves act as feedback based on the behavior of the light inside each of them. One example of this is shown early in the demo video after the break. The blue button toggles between polyphonic and monophonic mode with the light fading in and out for the latter.

Continue reading “MIDI Pedal Project Looks As Good As It Sounds” →

Acoustic Bass Guitar Uses Water Jug And Two Strings

April 7, 2013 by Mike Szczys 18 Comments

water-bottle-acoustic-guitar

It’s easy to dismiss this one at first glance. But once you hear [Tychsen81] playing the thing you’ll want to know more.

He posted the demonstration way back in 2009. It wasn’t until a year later that he filmed the particulars of how the thing was made. The strings are actually bass guitar strings, an A and D string that are tuned down to E and A to play along with Black Sabbath’s “Ironman”. The neck is made out of two boards. One serves as the fingerboard, which is fretless. The other is mounted under that in order to provide negative space for the bridge while keeping the strings at the right height for the fingerboard. The water bottle helps to amplify the sound and that’s why the bottom end of the strings pivot on the bridge, pass through the neck, and are anchored on the bottom edge of the bottle.

We’ve embedded both the demo and the build videos after the break.

If this gets you thinking about making your own instruments you will also be interested in the Whamola.

Continue reading “Acoustic Bass Guitar Uses Water Jug And Two Strings” →

Steampunk Theremin Goggles

April 4, 2013 by Ryan Fitzpatrick 11 Comments

wearable-theremin-goggles

Lots of people build custom steampunk goggles, but most don’t implement any interactivity – they’re just an aesthetic accessory. [Sarah] recently decided to built a pair that, besides looking cool, would engage the wearer in creating sound. She accomplished this by integrating an optical theremin into their design.

To keep the build both affordable and wearable she researched simplified theremins, and eventually settled on creating a basic model that uses only a handful of components and two 555 timers. The main body of the goggles was constructed using mostly random mismatched pieces of metal and leather. Mounted on the outer edge of each lens, there is a photo sensor and a corresponding slider control. Adjusting the slider alters the level of resistance, therein changing the pitch of the sound. The theremin will produce different pitches and octaves depending on how much light the sensors receive. So, the wearer, or a nearby friend, waves their hands around the wearers head to control it.

The speaker and volume knob are cleverly disguised as the two ‘lenses’. Rotating the volume knob lens adjusts an internal potentiometer that’s held in place by a custom laser etched piece of acrylic. To top it all off, she even designed her own PCB using Eagle.

Check out a video demonstration after the break.

Continue reading “Steampunk Theremin Goggles” →

Building A Theremincello

April 3, 2013 by Mike Szczys 11 Comments

building-a-theremin-cello

We totally missed the ball on this project. It should have been run on April Fools’ day and you would have no idea if it were real or a hoax. That’s because the very serious performance given after the break is hard to watch without a least a bit of a chuckle. The instrument shown above is a Theremincello. It’s an instrument in the shape of a cello which functions in a similar way to a Theremin.

The instrument being played in that video clip is the first generation and the one pictured above is its successor. The creator wanted to refine the electronics so that the resulting sound wasn’t so ‘flutey’. The result can be heard on the video embedded in this Theremin World article and we think they’ve accomplished the goal; it sounds much better! In the clip [Thierry Frenkel] demonstrates changing notes on the fingerboard with the left hand. The right hand which would normally bow the strings operates the lever to adjust the volume of the note being played back.

If a single fingerboard isn’t enough for your needs you may consider building this four-track design instead.

Continue reading “Building A Theremincello” →

An EQ Display For A Pedal Board

April 2, 2013 by Brian Benchoff 11 Comments

There are a lot of tinkerers out there who got their start in electronics with musical hacks. Surprisingly though, we don’t see many submissions to our tip line covering boost circuits for electric basses, rewiring guitar electronics, or even more complex effect pedals. [Deadbird], though, is bucking that trend with an EQ display stomp box that fits neatly on his pedal board.

[Deadbird]’s build isn’t a graphic equalizer that can change the volume of different frequency bands; instead, he used the MSGEQ7 chip to listen in on the signal his guitar is producing and display that on a 128×64 graphic backlit display.

The entire project was prototyped on a breadboard with an Arduino. After he got all the components working – a momentary switch to turn the pedal on and off, 1/4″ jacks for the input and output, and a power supply – [Deadbird] took an Arduino prototyping shield and made everything more permanent. Now he’s got an attractive pedal on his board that shows the signal coming from his guitar in seven neat bands.