DSLR Performance Measured With Audio Editing Software

January 27, 2012 by Mike Szczys 16 Comments

[Jaroslav’s] camera didn’t have a feature to measure the speed of its response in different modes so he figured out his own method. Using the microphone on his webcam he recorded the sound made by the mirror and shutter movements, then used Audacity to analyze the camera’s performance.

When you get right down to it, this is a fantastic idea. Audacity, the open source audio editing suite, has the ability to show each captured audio track next to each other. That makes it easy for you to precisely align the clips, and has in-build time measuring features with fantastic resolution.

He tested a whole bunch of different settings on a Canon EOS600D DSLR camera. In the image above you can see him comparing performance between different ISO settings. He also looks into different brands and sizes of SD storage cards, as well as the time difference when storing raw image data versus JPEG encoded data.

Knockoff Game Controller Makes A Fine Remote Shutter Release

December 29, 2011 by Mike Nathan 3 Comments

remote-shutter-release

[Duncan Murdock] received a Canon DSLR camera for Christmas and wanted a remote shutter release to go along with it. Since nary a store was open on Christmas, he was pretty much out of luck. Scrounging around in his parts drawer, he found all sorts of goodies waiting to be reused, including a knockoff Wii nunchuck.

He pulled the original cable from the nunchuck and replaced it with an old telephone wire, attaching a 2.5mm plug to the end. The plug goes directly into his camera’s control port, allowing him to trigger the auto focus and shutter mechanisms with the push of a button.

We like the idea of a junk controller being recycled for use in a camera, though we think it has far more potential than being used as a simple wired trigger. If both the nunchuck and camera were fitted with some sort of wireless interface (Bluetooth, IR, etc), we think it would make a great addition to any hobby photographer’s kit.

IR Remote For DSLR Cameras

December 8, 2011 by Caleb Kraft 8 Comments

Since most DSLR cameras now have an IR communication port, [Julius] thought it would be a good idea to build an IR shutter release remote. He has released the plans for two versions; a single sided hand etched one, and a double sided one to have made professionally. He notes that it should have a range of at least 10 meters thanks to the 100mAh Li-Po battery and a reasonably high power IR LED. You can download the source code as well as the etching mask and eagle files from the wiki page. He does note that you may have to change the pattern sent to match your camera.

DSLR Focus Stacking Assistant Takes The Hard Work Out Of Macro Photography

October 4, 2011 by Mike Nathan 8 Comments

canon_dslr_focus_stacking_assistant

Focus stacking makes for fantastic macro images, but the process can be tedious without the right tools. While some focus stacking rigs require the camera to be moved away from the subject in small increments, others choose to keep the camera stationary while focusing the lens before each shot.

Both methods produce great results, but you need a steady hand and a lot of patience to get the job done. [Oleg] uses the focus stacking technique relatively frequently, so he decided to automate the process in order to save himself some time. Using an Arduino and a USB host shield from Adafruit, he put together a focus stacking assistant for his Canon EOS camera.

The assistant allows him to set two focal points, leaving the Arduino and his camera with the task of taking pictures. The Arduino commands the camera to tweak the focal point ever so slightly between each image, resulting in an array of images ready for stacking.

He says that the process is a bit slow at the moment, but he’ll be cleaning up the code and building a Nikon-compatible unit in the weeks to come.

Robust Wireless DSLR Control Over Bluetooth

September 1, 2011 by Mike Nathan 4 Comments

yanis_android_bluetooth_camera_controller

[Manishi] wrote in to share his latest project, a Bluetooth DSLR controller that works with Android. More than a mere Bluetooth shutter trigger, his device lets you control a wide array of other settings such as aperture, shutter speed, ISO, white balance, focus position and live view.

His “YaNis” control system was built using an Arduino Pro Mini, along with a USB host shield and a Bluetooth module he picked up from SparkFun. Obviously any other Arduino and SPP compatible Bluetooth board can be used, though component size is definitely a consideration for this project, and his selections are pretty well-suited to the job. The Arduino half of the software relies heavily on [Oleg Maruzov’s] PTP/USB libraries to get things done, but the free Android control app is all [Manishi’s] creation.

The Bluetooth dongle connects to the camera via USB, and once it’s paired with his Android phone, [Manishi] has total control at his fingertips. He has plenty of improvements planned for the near future including additional camera support, so we expect that we’ll see an even more robust control application before too long.

Continue reading to see a quick video demo of YaNis in action.

Continue reading “Robust Wireless DSLR Control Over Bluetooth” →

Camera Flash Marquee: Real Of Fake?

July 27, 2011 by Mike Szczys 105 Comments

It’s time for everyone’s favorite comment thread game: Real or Fake? This week’s edition comes in from a tip that [Fabian] sent us about the music video Bright Siren by the band Androp. The video starts by showing bundles of cables being sorted and connected to breadboards. We get a brief shot of a large LED matrix (presumably being used for testing purposes) then footage of a lot of DSLR cameras with external flashes. These are mounted on racks to produce the marquee seen in the image above. The band performs in front of it for the rest of the video.

We’ve embedded the original video, as well as a ‘making of’ video after the break. There’s also a website you can checkout that lets you write your own message on the marquee. That bit could be easily done in flash so there’s no que, you’ll notice there’s no live feed. While we think the theory is real, we’re a bit skeptical about whether this performance is real or video editing magic. In the behind the scenes clip you can see breadboards attached to each camera flash with rubber bands so we’d guess that at least some of the hardware was setup. But we’re wondering if the animated effects were done in editing like that tea light animation. Let us know what you think by leaving a comment.

Continue reading “Camera Flash Marquee: Real Of Fake?” →

Megavallometer Camera Trigger

July 17, 2011 by Mike Nathan 4 Comments

megavallometer_camera_trigger

[Tobe] has an intervalometer for his camera, but he wanted a device that could trigger the shutter using several different methods, not just time. He calls his creation the Megavallometer, which can utilize any one of three distinct criteria.

He recently purchased an Arduino and a couple of shields, so he figured this would be a perfect project in which to use them. He hooked up a microphone and a photodiode to the Arduino, allowing him to use both sound and light to trigger his camera, depending on which mode he selects. Of course, the Megavallometer still incorporates the functionality of a standard intervalometer as well.

Once connected to his camera he selects one of the three trigger programs, and the Arduino handles the rest. If either the light or sound triggers are selected, the respective sensors measure the ambient levels upon selection, allowing for accurate results in any setting.

While the Megavallometer is a bit larger than other intervalometers we have seen, it looks incredibly useful and can likely be strapped to a tripod or similar if need be.

If you have a minute, be sure to check out the video on his site for a sneak peak if his Megavallometer in action.