Maiden Kansas City Keyboard Meetup Was A Clacking Good Time

August 30, 2022 by Kristina Panos 10 Comments

Wow! I can’t believe it already came and went — but the first annual (semi-annual?) Kansas City Keyboard Meetup was, in my opinion, a rousing success. And I think organizer and Discord-nominated god among men [Ricardo] agrees with me. (He does; I checked before we left the venue.)

First of all, the attendance was off the charts, perhaps thanks in part to our announcement last week. We aim to get you the news sooner next time, in case you want to come in from surrounding states and municipalities. RSVPs sat around 20-something, and then shot up to 60 or so in the days leading up. Fortunately, there were enough tiny sandwiches, granola bars, and s t i c k e r s to go around. I already put mine on my keebin’ toolbox.

The Hive Was Buzzing

The event took place at Hive Co-Working thanks to [Nick], and overall, the space turned out to be a good layout. We were set up right inside the windows looking out to the street, and I like to think that we drew in a few passers-by, though I am probably more than a little bit biased. I wondered aloud on the way home how a sandwich board out on the sidewalk would have affected the influx of randos.

My husband pointed out that even though we were all the way downtown, this is Kansas City and not New York City, and most of the keyboard enthusiasts about town were already accounted for. Hmpf. I still say we should try a sandwich board next time. We could go meta and mention the tiny sandwiches inside. Don’t worry — there was plenty of sanitizer and napkins to go around, plus a box of gloves.

Continue reading “Maiden Kansas City Keyboard Meetup Was A Clacking Good Time” →

C64 Turned Theremin With A Handful Of Parts

August 30, 2022 by Lewin Day 7 Comments

The theremin is popular for its eerie sound output and its non-contact playing style. While they’re typically built using analog hardware, [Linus Åkesson] decided to make one using the venerable Commodore 64.

The instrument works by measuring the capacitance between its two antennas and the Earth. As these capacitances are changed by a human waving their hands around near the respective pitch and volume antennas, the theremin responds by changing the pitch and volume of its output.

In this case, the humble 555 is pressed into service. It runs as an oscillator, with its frequency varying depending on the user’s hand position. There’s one each for pitch and volume, naturally, using a clamp and spoon as antennas. The C64 then reads the frequency the 555s are oscillating at, and then converts these into pitch and volume data to be fed to the SID audio chip.

[Linus Åkesson] demonstrates the build ably by performing a slow rendition of Amazing Grace. The SID synthesizer chip in the C64 does a passable job emulating a theremin, used here with a modulated pulse wave sound. It’s an impressive build and one we fully expect to see at a big chiptune show sooner rather than later. We’re almost surprised nobody came out with a C64 Theremin cartridge back in the day.

We’ve seen other fancy theremin-inspired builds recently too, like this light-based design.

Continue reading “C64 Turned Theremin With A Handful Of Parts” →

A Beautiful DIY Guided Saw

August 30, 2022 by Dave Rowntree 19 Comments

[JSK-koubou] has quite the talent for creative woodwork, particularly building interesting tools or improving existing ones. This recent project (multiple build videos below: part 1, part 2, and part 3) is a very flexible type of guided pull saw, whereby a fine-toothed saw blade is fixed in the bed, and the workpiece is pulled over it it. By fixing it at a shallow angle, and enabling the blade to be raised up through the bed, the workpiece can be progressively cut by simply pulling it over the blade, then winding it up a little until the final cut length is achieved.

From a construction perspective, the tool is all-metal, built from a collection of the off-the-shelf parts, and thick, hand-cut aluminium alloy plate, nary a CNC tool in sight. The only unusual component is the saw blade itself, which might be a bit tricky to track down if you were so inclined to reproduce the build. It appears (well if you believe the auto-translation by Google Lens, anyway) to be a spare blade for a commercial guide saw available in Japan at least.

We found it particularly pleasing to see the use of a home-built anodizing setup to give it a bit of a jazzy color scheme for some of the plates, just because. Like with many of the build videos from this YouTuber, it is well worth watching all of them, if only just to gather a few ideas for one’s own workspace, if you can stop yourself getting distracted looking at all the other neat tools he uses on the way.

DIY tool builds are not uncommon in these parts, here’s a neat DIY combo table-based project, and here’s a homebrew auto-lowering metal bandsaw which could be a real timesaver.

Continue reading “A Beautiful DIY Guided Saw” →