2024 Tiny Games Contest: Neat PCB Business Card Was Inspired By The Arduboy

September 13, 2024 by Lewin Day No comments

The humble business card is usually a small slip of cardboard with some basic contact details on it — but as hackers know, it can be so much more. [Marian] has provided us a great example in the form of his own digital business card, which doubles as a handheld game!

Wanting to make his business card more interesting for better engagement, [Marian] was inspired by the Arduboy to give it some interactivity. He chose the STM32G030F6 microcontroller as a cheap and reliable option to run his business card. He then created a 10×9 LED matrix display using Charlieplexing to minimize the amount of I/O pins required. For controls, he went with the usual directional cross plus two action buttons. He implemented a variety of games on the card—including a Flappy Bird clone and a game similar to the classic Simon toy.

Files are on GitHub for the curious. We’ve featured some other great business cards this year, too. Indeed, we ran a whole challenge! If you’re cooking up your own exemplary little PCB to hand out at conferences, don’t hesitate to let us know!

2024 Business Card Challenge: CardTunes Bluetooth Speaker

July 20, 2024 by Donald Papp 8 Comments

A business card form factor can be quite limiting, but that didn’t stop [Schwimmflugel] from creating CardTunes, an ESP32-based Bluetooth audio speaker that tried something innovative to deliver the output.

What’s very interesting about this design is the speaker itself. [Schwimmflugel] aimed to create a speaker out of two coils made from flexible circuit board material, driving them with opposite polarities to create a thin speaker without the need for a permanent magnet.

The concept is sound, but in practice, performance was poor. One could identify the song being played, but only if holding the speaker up to one’s ear. The output was improved considerably with the addition of a small permanent magnet behind the card, but of course this compromised the original vision.

Even though the concept of making a speaker from two flexible PCB panel coils had only mixed success, we love seeing this kind of effort and there’s a lot to learn from the results. Not to mention that it’s frankly fantastic to even have a Bluetooth speaker on a business card in the first place.

The 2024 Business Card Challenge is over, but judging by all the incredible entries we received, we’re thinking it probably won’t be too long before we come up with another sized-constrained challenge.

Continue reading “2024 Business Card Challenge: CardTunes Bluetooth Speaker” →

Congratulations To The 2024 Business Card Challenge Winners!

July 15, 2024 by Elliot Williams 8 Comments

When you ask a Hackaday crowd to design a business card, you should expect to be surprised by what you get. But still, we were surprised by the breadth of entries! Our judges wracked their brains to pick their top ten, and then we compared notes, and three projects rose to the top, but honestly the top ten could have all won. It was a tight field. But only three of the entries get to take home the $150 DigiKey gift certificates, so without further ado…

Continue reading “Congratulations To The 2024 Business Card Challenge Winners!” →

A business card-sized synthesizer with capacitive touch pads.

2024 Business Card Challenge: The Gift Of Music

July 11, 2024 by Kristina Panos 7 Comments

Has anyone ever told you that you just can’t carry a tune? If you were to be the lucky recipient of one of [Ayu]’s synthesizer business cards, well, then it really couldn’t be helped.

This tiny, go-anywhere instrument has quite a lot going for it. It’s easy for anyone to pick up and play something, but versatile enough that a more experienced musician can add complexity. While we do tend to see twelve keys in a small form-factor like this, the Canta-Cart uses them a bit differently. Only ten are tied to notes, and the other two are for transposition.

[Ayu] was able to keep the BOM cost way down by using the PY32, which is an ARM Cortex-M microcontroller made by Puya that costs as little as 10¢ each. In fact, the whole BOM clocks in around 60¢ total even with the audio DAC and amplifier ICs, which really makes these ideal to actually give away to people. Check it out in action after the break, or try it in the browser!

Continue reading “2024 Business Card Challenge: The Gift Of Music” →

A bunch of unpopulated PCB business cards with rad dead rat artwork.

2024 Business Card Challenge: A Very Annoying Business Card, Indeed

July 8, 2024 by Kristina Panos 7 Comments

Usually the business card itself is the reminder to get in contact with whoever gave it to you. But this is Hackaday, after all. This solar-powered card reminds the recipient to send [Dead Rat Productions] an email by beeping about every two hours, although the gist of that email may simply be begging them to make it stop, provided they didn’t just toss the thing in the garbage.

The full-on, working version of the card is not intended for everyone — mostly serious-looking A-list types that ooze wealth. Most of [Dead Rat Productions]’ pub mates will get an unpopulated version, which could be a fun afternoon for the right kind of recipient, of course.

That person would need a Seeed Studio Xiao SAMD21, a solar panel, plus some other components, like an energy-harvesting chip to keep the battery topped up. Of note, there is a coin cell holder that requires prying with a screwdriver to get the battery out, so there’s really no escaping the beeping without some work on their part. We rather like the artwork on this one, especially the fact that the coin cell sits inside the rat’s stomach. That’s a nice touch.

A 3D-printed magnetic fidget business card with ID storage.

2024 Business Card Challenge: Magnetic Fidget Card

July 7, 2024 by Kristina Panos 5 Comments

If you want someone to keep your business card around, you should probably make it really cool-looking, or have it do something useful. It’s kind of the whole point of the 2024 Business Card Challenge. And while we’d normally expect electronics of some persuasion to be involved, we must admit that this magnetic fidget card definitely does something, at least when manipulated. And even when it’s just sitting there, the card has a storage slot for IDs, or whatever you want.

Have you ever played with a magnetic fidget? They are quite satisfying, and making one yourself is likely to be even cheaper than making one of the spinning variety. This one uses a whopping 16 neodymium magnets, which means that it’s probably quite aurally satisfying as well as fun to handle.

And of course, since it’s 3D-printed, you can put whatever you want on the faces and update them easily if something changes. Bonus points to [Bhuvan Bagwe] for designing some for the Hackaday crew!

2024 Business Card Challenge: A Battery Tester With Blinkenlights

July 6, 2024 by Kristina Panos 8 Comments

Readers of a certain vintage will no doubt remember that for a brief time, some alkaline batteries came with a built-in battery tester. Basically, you just pushed really hard with your fingernails on the two ends of the strip, and it either lit up the little strip (or didn’t if it was dead), or made the word ‘good’ appear if energized.

But those days are long gone. What you need now is to either grab the voltmeter, stick out your tongue, or build yourself a battery-testing business card. Even the normies will enjoy this one, mostly because LEDs. Forty-seven of them to be exact, which will come to life and demonstrate that [Greg] is capable of making working electronic gadgets. No way does this card end up at the bottom of a desk drawer.

As far as grasping the batteries goes, [Greg] had several ideas, but ultimately landed on pogo pins, which we think is a fabulous solution. Be sure to check out the neat interactive BOM, somewhere in the middle of which is the CH32v003 RISC-V microcontroller. In the video after the break, you can see [Greg] using a Flipper Zero to program it.

Continue reading “2024 Business Card Challenge: A Battery Tester With Blinkenlights” →