Ultrasonic Data Transmission With GNU Radio

December 10, 2013 by 35 Comments

When we hear GNU Radio was used in a build, the first thing we think of is, obviously, radio. Whether it’s a using extremely expensive gear or just a USB TV tuner dongle, GNU Radio is the perfect tool for just about everything in the tail end of the electromagnetic spectrum.

There’s no reason GNU Radio can’t be used with other mediums, though, as [Chris] shows us with his ultrasound data transmission between two laptops. He’s transmitting audio from the speakers of one laptop at 23 kHz. It’s outside the range of human hearing, but surprisingly able to be picked up by a cheap desktop mic connected to another laptop. His GNU Radio setup first converts a string of text to a 5-bit packet, modulates it with FSK, and bumps up the signal to 23 kHz. On the other end, the data is decoded by doing the same thing in reverse.

The setup is easily able to reject all audio that isn’t in the specified frequency range; in the video after the break, [Chris] successfully transmits a ‘hello world’ while narrating what he’s doing.

Continue reading “Ultrasonic Data Transmission With GNU Radio” →

Disk-O-Mat: A Photobooth For Records

December 10, 2013 by 15 Comments

record

A photo booth is a simple concept – drop in a coin and get a few pictures in a couple of minutes. That’s only a visual record, though. What if you wanted to record audio? Thus the disk-o-mat was born.

The disk-o-mat is one of [flo]’s projects. In place of the miniaturized dark room found in a photo booth, [flo] put a record cutting setup. The 7″ records are polycarbonate sheets, each transferred to the turntable by a vacuum gripper. When the plastic disk is loaded, a stylus is set down on the disk and the record light goes on.

There isn’t a computer or any other digital means of saving audio and playing it back later. Everything is done just as how 45s – or more specifically, really old 78s – were cut; whatever goes into the microphone is cut directly into plastic.

The disk-o-mat was originally built in 2009, and has traveled to a few venues. [flo] is working on speeding up the process and making the machine a bit more reliable. Still, an awesome build and an awesome concept.

Videos below.

Continue reading “Disk-O-Mat: A Photobooth For Records” →

Solar Powered, Tweeting Bird Feeder

December 10, 2013 by 3 Comments

feeder-v3

The folks at Manifold created their version of a tweeting bird feeder, and [Chad] wrote up a behind-the-scenes of their design. The goal is something we’ve seen before: When the bird lands to eat, take a picture and tweet it. In this case, they had some corporate money behind the project, and that allowed them to buy a nice solar panel and battery pack to keep the whole thing running.

The write-up is full of the experimentation that we all enjoy: They found that detecting motion through the camera feed wasn’t reliable, so they switched over to a PIR sensor. The PIR sensor was too sensitive to heat changes during the day, so they went with an ultrasonic rangefinder, but wind caused issues there. They finally came up with a solution which involves using two sensors to confirm motion. This seems a bit more complicated than it needs to be, but it works well for them.

We think it is nice to see companies getting behind quirky projects. All told, they spent dozens of hours on this, and they chose to give all of their findings back to the community in the form of thorough explanations and project diagrams. It would be nice to see more of this.

The weather in Colorado hasn’t been the best lately, so the birdhouse hasn’t been tweeting for a while. In our experience, a project that’s turned off is in the dangerous position of being scavenged for parts. Hopefully that isn’t the case here, and we will see it back in action when Spring starts.

The $40 X86 Arduino

December 9, 2013 by 87 Comments

Every week the Hackaday tip line receives an email about a new dev board. The current trend is towards ARM devices, and only once have we seen an x86-based device. Today that count went up to two. It’s called the 86Duino and stuffs an old Pentium II-class machine capable of running DOS, Windows, and Linux into the space of an Arduino,

The 86Duino Zero features, of course, an x86 Vortex86EX processor running at 300 MHz. This board also features 128 MB of RAM, 8MB of Flash and the usual compliment of Arduino pins in a Leonardo-compatible layout. Also on the SoC is a PCIE bus, Ethernet, a USB 2.0 host, and an SD card. There’s a lot of stuff on this board for such a small size.

Compared to the gigahertz-fast ARM boards around, the 86Duino isn’t really that fast, but that’s not the point. There’s obviously a market for extremely tiny x86 boards out there as evidenced by the Intel Galileo, and this board is $30 cheaper than the Intel offering.

There’s no video out on this board, so someone will have to figure out how to attach a graphics card to the PCIE connector before we build a miniaturized old school DOS gaming rig. Still it’s a very neat piece of hardware. If you need to have it now, here’s a vendor.

Thanks [sohaib] for sending this one in.

Future Tech And Upgrading Your Brain

December 9, 2013 by 21 Comments

hackingNPhilDec

A few weeks ago [Jacob Merz] sent me an email about his sensory expansion project, which allows the wearer to “hear” infrared light by mapping it to specific tones. Although a rough prototype, [Jacob’s] device reflects a larger realm of technological possibilities: the development of a type of “peripheral” for the human body. EDIT: Updated gallery to include new photos and added link to Jacob’s new site.

You’re going to want to listen to [David Eagleman’s] TEDx Alamo talk particularly around 10 minutes in, where he talks about the sonic glasses.  [Eagleman] claims that the human brain, if given a consistent input that corresponds to the real world, can decipher the signal into usable information. The sonic glasses, which provide a type of sonar to the blind wearer, eventually just…work. Your brain can “learn” its own drivers for input devices.

Continue reading “Future Tech And Upgrading Your Brain” →

Ion Wind Propelled Star Trek Enterprise

December 9, 2013 by 28 Comments

[Steven Dufresne] recently demonstrated ion propulsion using high voltage, and someone pointed out it kind of looked like the warp drives on the Star Trek Enterprise… so he went out and bought a model Enterprise and rebuilt his demonstration!

His original video on Ion Winds gives a good summary of the beginning of his experiments. In fact, it’s actually a recreation of a design he saw at the International Symposium on New Energy back in 1996 of the Electrokinetic Apparatus which was patented in 1960.

By creating a high voltage arc of electricity, it appears that the resulting “ion wind” propels the Enterprise with respect to the fixed testing apparatus. Did we mention he made the high voltage power supply himself?

[Steven] also points out that the propulsion might be occurring due to dielectrophoresis, but hasn’t discovered any conclusive evidence to prove that. Even the patent is rather vague on how this works:

The invention utilizes a heretofore unknown electrokinetic phenomenon which I have discovered; namely, that when a pair of electrodes of appropriate form are held in a certain fixed spaced relation to each other and immersed in a dielectric medium and then oppositely charged to an appropriate degree, a force is produced tending to move the pair of electrodes through the medium.

Regardless of how or why it works, it’s a fun video to watch, so make sure you stick around after the break to see it!

Continue reading “Ion Wind Propelled Star Trek Enterprise” →

Developed On Hackaday: First Feedback From Users

December 9, 2013 by 54 Comments

2013-12_Developed_on_Hackaday

Holy cr*p guys… we were amazed by the quantity of positive feedback that was left in the comments section of our last article. We have been featured by Slashdot ! We got plenty of project name suggestions, therefore we organized a poll located at the end of this post to let you decide which one is best. I also received many emails from people eager to start contributing to this offline password keeper project. If you missed the call and want to get involved, it’s still not too late. You can get in touch with me @ mathieu[at]hackaday[dot]com. So far, we have many beta testers, several software developers, one security assessor and a few firmware developers. Next step is to create a mailing list and a Hackaday forum category once the project’s name has been chosen.

Obviously, the very first post of our “Developed On Hackaday” series was to gauge your initial reactions to this ‘new’ project. Notice here the double quotes, as when someone has a new idea there usually are only two possibilities that may explain why it doesn’t exist in the market yet: either it is completely stupid or people are already working on it. In our case, it seems we are in the second category as many readers mentioned they wanted to work/were working/had worked on a similar product. As we’re selfish, we offered them to contribute to this new device.

To ensure that all of our readers are on the same page as to how the device will work we embedded a simple block diagram after the break, as well as a list of all new functionalities that we want to implement given the feedback we received. So keep reading to see what the future holds, as well as to vote on this new project’s name…

Continue reading “Developed On Hackaday: First Feedback From Users” →