Mickey Shall Be Free!

The end of the year brings with it festive cheer, and a look forward into the new year to come. For those with an interest in intellectual property and the public domain it brings another treat, because every January 1st a fresh crop of works enter the public domain.

We’ll take a look at the wider crop around the day, but this year the big story is that Mickey Mouse, whose first outing was in 1928’s Steamboat Willie, is to get his turn to be released from copyright. [Jennifer Jenkins] from Duke University’s Center for the Study of the Public Domain, is using Mickey’s impending release to take a look at the law surrounding such a well-protected work.

Mickey has perhaps the greatest symbolism of all intellectual property when it comes to copyright terms, having been the reason for the Disney Corporation’s successive successful attempts to have copyright terms extended. Now even their reach is about to come to an end, but beware if you’re about to use him in your work, for the Mickey entering the public domain is an early outing, without gloves or the colours and eyes of his later incarnations. Added to that, Disney have a range of trademarks surrounding him. The piece makes for an interesting read as it navigates this maze, and makes some worthwhile points about copyright and the public domain.

Last year, we welcomed Fritz Lang’s Metropolis to the public domain. Meanwhile if you’re reading this in 2023, we believe our use of a header image featuring the 1928 Mickey to be covered by the doctrine of fair use.

Storage Media Forgotten

These days, cheap removable storage is no problem. USB sticks are virtually free at moderate capacity and not unreasonable, even at relatively large sizes. They are rugged, work across platforms, and don’t require any exotic interfaces. But this hasn’t always been the case.  In the 1990s, people wanted to store too much data for floppies, but weren’t willing to shell out for removable hard drives or tapes. Many companies identified this opportunity with, perhaps, the most successful being Iomega with the Zip drive. But there were others, including the Avatar Shark that [This Does Not Compute] remembers in a video you can see below.

Haven’t heard of the Shark? We had not either, but reviewers seemed to like it. The drive would fit in your pocket if you had a fairly large pocket. The 250 MB cartridge was smaller (but thicker) than a 3.5-inch floppy. It performed ok and connected to the parallel port which was common in those days.

Continue reading “Storage Media Forgotten”

Remembering Ed Roberts, The Home Computer Pioneer You Should Have Heard Of But Probably Haven’t

We’re pretty familiar with such names as Steve Wozniak, Bill Gates, Jack Tramiel, Nolan Bushnell, and the other movers and shakers of the 1970s home computer world. But there’s one person who towered among them for a few years before cashing out and leaving the computer business to pursue the life he’d always wanted. [Gareth Edwards] for Every has a fascinating profile of Ed Roberts, the man who arguably started the home computer boom but is now an obscure figure.

Even if you’ve never heard of Ed Roberts, you’ve likely heard of the product his company brought to market. The MITS Altair 8800 was the first computer to be sold as a home computer rather than for business or scientific use, and though its toggle switch interface now seems extremely quaint, its influence on every microcomputer that followed has been immense.

As followers of the retrocomputing scene, we know about the Altair, but perhaps more interesting is the story of MITS. Formed by a group of US Air Force veterans to produce rocket telemetry equipment, it pivoted to calculators, and as that market imploded in the early 1970s, the computer was a big gamble to save it from bankruptcy. It’s one that paid off, and as someone used to seeing technological cycles of boom and bust, Ed cashed out at the peak of the first wave. He followed his long-held ambition of becoming a doctor, and when, in 2010, he was near the end of his life, the hospital caring for him was shocked to find itself being visited by Bill Gates. It’s an article about a fascinating individual well worth reading.

The Altair, meanwhile, is a project that appears quite often here at Hackaday. Here’s a recreation of one as original as possible. The Mark 8 came out a little earlier but without complete kits or assembled units, so it didn’t get the traction — or the imitators — that the Altair did.

The Hot Chocolate Effect Explained

This is the time of year when people in the Northern Hemisphere like to enjoy hot beverages like hot chocolate. [The Action Lab] uses hot chocolate to demonstrate an odd acoustic effect. Tapping a container of hot chocolate — or even just hot water — will make a sound at a certain frequency. But if you keep tapping, the frequency of the sound will gradually increase. Don’t know why? Don’t worry, neither did scientists until around 1980.

The secret is bubbles and the speed of sound through air vs a liquid. The speed of sound in the liquid and the height of the liquid in the cup set the frequency. However, the speed of sound changes based on the bubbles, which alters the frequency.

Continue reading “The Hot Chocolate Effect Explained”

Hackaday Links Column Banner

Hackaday Links: December 17, 2023

Disappointing news from the US Senate this week as the “AM Radio for Every Vehicle Act” failed to advance in the sausage-making legislative process. We’ve previously covered this bill, which aims to force vehicle manufacturers to provide the means to receive terrestrial AM broadcasts in their cars and trucks without the need for extra subscriptions or charges. The bill’s sponsors tried to get it through on a “unanimous consent” maneuver, but Senator Rand Paul decided he didn’t like the idea of the government mandating what equipment cars should have. The coverage we’ve seen on this bill leads us to believe its sponsors are missing the point. Instead of pitching this as an issue of freedom of choice in entertainment, what they should be concentrating on is the safety aspect of AM radio. We’ve seen how much the government has invested in keeping AM stations on the air in just about any foreseeable emergency, so it’s only natural to look at a car’s AM radio as essential safety equipment like airbags, antilock brakes, and backup cameras. Seems like that’s something that everyone can agree on.  Continue reading “Hackaday Links: December 17, 2023”

Second Life UPS Mark II: A UPS For Low-Voltage DC Applications

When you have a whole stack of devices and appliances that all have an AC to DC adapter and which you’d like to put on an uninterruptable power supply (UPS), you could do the obvious thing and get an off-the-shelf UPS with myriad AC outputs. In the case of a 19″ rack this means wrangling a power strip or two and any combination of differently sized AC/DC adapters into the rack, with questionable efficiency and waste heat dumped into the rack. This is where a DC-only UPS like [Maciej Grela]’s Second Life UPS Mark II provides an interesting alternative.

At its core it’s a pretty simple concept: A single 400Watt power supply handles the AC/DC conversion from mains to 24 VDC, which feeds the battery charger as well as the outputs. These outputs include 5 VDC, 12 VDC and Vrail, with the latter being either the output from the PSU, or the battery voltage. In case of AC power failure, an LT4416 dual power path controller handles the switch-over from the PSU output to the internal batteries. In the article, [Maciej] covers how the buck modules for the 12 & 5 VDC rails were sized, along with the conversion of an old rack-mounted network switch into a UPS. Continue reading “Second Life UPS Mark II: A UPS For Low-Voltage DC Applications”

Mind Control… No, Not Like That

[Vintage Geek] found an interesting device from 1996 called “MindDrive” which claims you can control your computer with your brain. Oddly, though, it doesn’t connect to your head. Instead, it has a little finger sensor that looks like a pulse-ox sensor. Did it work? The video below will show you what it can and can’t do.

The company claims the device is the result of seven years of research. We suspect it is little more than a galvanometer, like a kid’s toy lie detector. There is a gold sensor and a Velcro strap. It is hard to imagine that it was feasible that “thinking left” would cause a change in your finger that the device can interpret.

Continue reading “Mind Control… No, Not Like That”