Halloween Hacks: Death Throws A Party

October 25, 2011 by 3 Comments

If you him the Grim Reaper, Azrail, Magere Hein, or simply, ‘Death,’ he sure throws a good party. [Victor] has an anatomical model of a skeleton at his job named [Hein], and for his birthday party, his coworkers decided to throw [Hein] a party.

[Victor]’s first skeleton-based build was last summer. The twinkle of the summer sun in [Hein]’s eye socket made for a great occasion to dress the skeleton up in some summer garb. [Hein] was dressed in a fashionable Hawaiian shirt and put in a window along a corridor. Of course, a skeleton is no good if there’s no element of surprise, so [Hein] held disposable camera that flashed every time someone walked by.

[Hein]’s birthday spectacular required something a bit more shocking. A blowout whistle was added to [Hein]’s mandible. With a PIR sensor and a TI Launchpad, [Hein] was commanded to blow the whistle every time someone walked by.

[Victor]’s builds may not have the shock value – or even be as scary as Halloween necessitates – but he’s got a few good ideas for what could become a great yard display. Check out the video after the break to see [Hein] greeting [Victor]’s coworkers.

Continue reading “Halloween Hacks: Death Throws A Party” →

Robotic Disco Floor Is A Mobile Party

September 18, 2011 by 16 Comments

[Chris Williamson] designed the Rave Rover, a mobile disco floor with integrated stripper pole for this year’s DragonCon.

[Chris] started building combat robots back in 2000 for Battlebots and Robot Wars and cofounded the South Eastern Combat Robot league. He’s a lover and not a fighter, so for the DragonCon robotics track [Chris] built his mobile dance party. He put up an Instructable of his build and some of the features are really clever. Whenever the dance floor is being ‘used’, pneumatic cylinders lower the disco floor so it rests directly on the ground. A good idea, especially considering what we imagine happens on the Rave Rover.

For the light-up disco floor, [Chris] cut black ABS sheets on a CNC router and installed RGB LED modules controlled by an Arduino. The floor can display low-res animations, but random patterns look just a cool.

The Rave Rover was designed and built over a one month span to get ready in time for DragonCon. The build was a little hurried but the quality is still there. Check out video of the Rave Rover at DragonCon after the break.

Continue reading “Robotic Disco Floor Is A Mobile Party” →

JGPX Keeps The Bachelor Party Moving In The Right Direction, Regardless Of BAC

September 16, 2011 by 6 Comments

jGPX_bachelor_party_navigator

[Davy] and his friend [Chris] were tasked with putting together a bachelor party for their friend [J], and had a little more in mind than the standard drunken revelry. To earn the privilege of partying his brains out, they decided that [J] would have to fulfill a series of tasks and challenges before joining up with the rest of his friends for the evening’s events. [Davy] didn’t specify what these tasks were, lest he spoil the surprise, but he did let us in on a little device that he and [Chris] built to help guide the bachelor through his day.

They were a bit worried that the bachelor would get sidetracked during his journey if he happened to imbibe along the way, so they built a device called jGPX that would ensure [J] stayed on track and on time. jGPX is a custom GPS navigator consisting of an Arduino, a GPS module with built-in antenna, and a compass.  The pair created a set of routes in Google Earth, exporting the data to KML for interpretation by their device. The jGPX is meant to guide [J] along via a small LCD screen that shows him the distance to his target as well as the proper direction of travel to get there.

It looks like [J’s] friends put a lot of effort into his party, and although there are no details as to how things went, we’re sure it was a blast!

The Partyscroller LED Display

September 5, 2011 by 16 Comments

As [Plasma2002] put it, “Those jumbo screens at concerts that display your text messages can be a lot of fun. Wouldn’t it be great if you could have the same thing for your own parties or social gatherings?” The answer to this question came in the form of this hack, a scrolling marquee sign that guests simply had to text to get it to display messages. Apparently guests at the party loved the device, and who wouldn’t?

More importantly for [HAD] though, is that [Plasma2002] decided to show everyone how it’s done. He gives us an overview of the process via a nicely illustrated block diagram, then breaks everything down into the actual code used. A Google voice account is used as the dial-in number and everything is kept anonymous. A “bad-word” filter is used to keep everything semi-appropriate.

Really a cool device, and one that we hope will show up at hacker’s parties everywhere. Who knows, maybe something like this could enjoy mainstream success as well. Check out the video after the break to see this device in action! Continue reading “The Partyscroller LED Display” →

A Quick And Dirty VU Meter For Your Next Party

August 21, 2011 by 12 Comments

If you want an easy project to spice up your next party, chances are you already have parts on hand to throw together [Mikerbot’s] quick and dirty VU-meter lights. The circuit he designed uses the audio input to trigger the base of a PNP transistor, toggling power through a string of LEDs. He’s using four lights for each of the stereo output signals, making them pulse with the music as seen in the video after the break. The circuit is built on a breadboard, and housed in a picture frame with a less-than-impressive diffuser (we think that’s always the hardest part… check out the Heavy Frost used in this project if you want something that works really well).

There are some VU meter chips out there that will really augment this concept. But one improvement might be to throw in an amplifier chip like the LM386 and a couple of potentiometers so that you can dial-in the sensitivity.

Continue reading “A Quick And Dirty VU Meter For Your Next Party” →

The Party Popper “Security” Robot

June 19, 2011 by 13 Comments

This “security” robot is based around the Lego Mindstorms NXT platform. As shown in the video after the break, this robot is capable of firing a “popper” at any intruder the owner of the robot sees fit.  It takes a decent amount of force to fire a popper, so this is pretty impressive with a Lego components by itself. If you’ve been looking for components to build your next robot, Lego might be worth a look.

This bot also features, according to the 14 year old Australian that built this, an HD webcam person ID system that sends him an email when it sees someone.  It uses bluetooth for control. Lego designs have come a long way since the grey castles some of you may have built in the 80s and 90s. Be sure to check out the video after the break. Continue reading “The Party Popper “Security” Robot” →

Class Up Your Next Party With The Drink Making Unit 2.0

April 4, 2011 by 7 Comments

drink_making_unit_20

The crew over at [Evil Mad Scientist Laboratories] has been hard at work preparing for the Barbot 2011 cocktail robotic exhibition. This year, they are packing some serious drinking fun with the Drink Making Unit 2.0. The predictably named follow-up to last year’s wildly popular Drink Making Unit doubles the mixing capability with six, rather than three fluids, and provides a visually stimulating drink mixing experience.

While they are similarly named, the new unit has been completely redesigned since last year. No longer are they relying on breast pumps to move the alcohol along. Instead, they are using compressed air to dispense fluids from wash bottles which were constructed from laboratory beakers. The fluids are measured in specially altered graduated cylinders that are designed to tip over and release their contents when the appropriate amount of alcohol has been poured. These cylinders are designed to mimic the movement of Japanese garden fixtures called “deer chasers”, tipping back and forth solely powered by the ingress and egress of liquid.

The dispenser’s control panel houses an ATmega164, which orchestrates the entire operation. It interfaces with the LED driver boards that make up the display via SPI. The micro controller is also tasked with monitoring when the graduated cylinders tip their libations into the dispensing funnel, which is done using IR LEDs and photogates.

It’s a great looking machine, and while there isn’t any drink mixing video as of yet, we can’t wait to see it in action.