Adding Compact Flash To An Old Sequencer

June 5, 2010 by Mike Szczys 32 Comments

[Shoji] has a beloved sequencer that went out of production ten years ago. Unfortunately the storage options are also 10 year out-of-date as SCSI is the stock option for storing his loops. Using a series of adapters he added Compact Flash storage to his Akai MPC-2000 Classic. The board has a connector for 25-pin SCSI which he wired to a 25-pin to 50-pin SCSI adapter. From there he connects a SCSI to IDE board, and then an IDE to CF. Subsequent versions of the Akai Classic have floppy drives in the front left corner so he used this method to mount he CF slot. Now he’s got plenty of storage with very little change to the appearance of the looper.

Modern Recordings On Wax Cylinder

June 1, 2010 by Mike Szczys 16 Comments

If you thought you’d never have a chance to release your hit single on the wax cylinder think again. A band obsessed with the Victorian era did just that, having a DIY’er produce the cylinders for them. The story was covered by the BBC and includes a lousy attempt to build a phonograph to play back the recording. The video shows their craftsmanship (or lack of it) but it’s not even in the same realm as the masterpiece we saw last September. You do, however, get to see the production equipment used at about 2:45 into the clip.

[Thanks Charles]

Bluetooth Boombox

May 31, 2010 by Mike Szczys 23 Comments

[Nathan] took this boombox and outfitted it for Bluetooth streaming. He took a Motorola DC800, which is meant to make headphones wireless, and connected it to the stereo inputs. The controls for the Bluetooth module were routed to the stock tape deck controls and a little bit of frosted spray paint adds a blue glow to the cassette window. Now he can stream music from his phone, including internet radio, which he’s done in the video after the break.

Did he find the most annoying demo video music ever? You be the judge. Continue reading “Bluetooth Boombox” →

Crossfade Curve Tweaking

May 30, 2010 by Mike Szczys 18 Comments

Tired of the disappointing performance from the crossfader on his Numark MIXDECK, [dj JD] cracked it open and made the crossfade curves adjustable. It’s a super-simple hack that just introduces two 100k trimpots to the crossfade slider. The change led to a higher volume level on the current channel until the slider was much nearer to the center. The added adjustment feature might be nice to have as two more knobs on the board but [JD’s] method leaves his equipment with a stock appearance. Is this a more refined version of circuit bending?

Moving Speakers To Mix Audio Tracks

May 30, 2010 by Mike Szczys 11 Comments

These speakers play different audio tracks depending on which orange square the sit atop. They’re RFID aware and the orange tiles are tags. If you get tired of a track just move the speaker to a different one, or place the speakers next to each other to play the same song. We’re sure there’s a project for us here, it’s just going to take some thinking to figure out what we want to do with it. But the concept is certainly intriguing. Check out the video demonstration after the break.

Continue reading “Moving Speakers To Mix Audio Tracks” →

Spark Plug Music

May 23, 2010 by Jakob Griffith 20 Comments

[youtube http://www.youtube.com/watch?v=92qql941DM4%5D

This is (video above) perhaps the most abstract way of playing sounds…ever. Yes, we’ve heard Hard Drive music and Obsolete technology bands, but [DJ Sures] brings us the first ever, spark plug instrument.

Much like Velcro and Teflon, the musical spark plug is claimed to be an accident. After testing energy use vs. spark power with his flare stack ignition controller, [DJ Sures] noticed that different frequencies could be produced. It was only a matter of reprogramming before death metal Twinkle Twinkle Little Star is heard. Now he just needs to refine it a bit and build a full stereo cabinet.

Composing Music With The Force Trainer

May 18, 2010 by Mike Szczys 9 Comments

In the ongoing quest to make the Force Trainer useful [Hunter Scott] developed a music composition platform for your mind (channel Jack Black’s voice for the last half of that sentence). Using the Force Trainer’s serial port [Hunter] feeds the data stream into a computer via an FTDI cable and uses Processing to make the music. It’s good, and the demos on his site are worth the click, but we still can’t get enough of the shocking video from back in March. But we digress, let [Hunter] walk you through his setup in the video after the break. Continue reading “Composing Music With The Force Trainer” →