Doom II On Epaper Display

April 10, 2011 by Mike Szczys 17 Comments

We love to see Doom ported to new hardware because it usually means that someone has found a way around the manufacturer’s security measures. But the most exciting thing for us to see this time is that Doom II is played on an epaper display. These are notorious for slow refresh rates, but as you can see in the video after the break, this one achieves an admirably fast page redraw.

According to a translation of the original forum post, the PocketBook 360° Plus boasts a 5″ E Ink Pearl screen, 533 MHz Freescale i.MX35 ARM11 processor, 128 Mb of RAM, 2 gigs of storage, and WiFi. No word on price for one of these babies as it seems they’ve not yet been release. Remind anyone of the green monochrome goodness from the original Game Boy?

Continue reading “Doom II On Epaper Display” →

Awesome Portable N64 Keeps Your Games In Hand, Out Of Sight

April 1, 2011 by Mike Nathan 19 Comments

n64_portable

[David] recently wrote us to share the portable Nintendo 64 he constructed with the help of the friendly people over at the ModdedbyBacteria forums. We are no strangers to N64 portables, as you may have noticed, but this one was just too good to pass up.

Sheathed in a metallic blue case, this console is an instant standout among the other portable N64 mods we have seen. As you would expect, he trimmed down an N64 console board and some various controller bits in order to fit them into the case, finishing it off with a 5″ PSOne display panel. A small fan protrudes out of the back side of the device, which seemed out of place at first. However, it not only keeps the console cool, but it can serve as a bit of a “kickstand” as well, if the console is placed on a flat surface. [David] also added a dongle for the bottom of the console, which allows him to use an external N64 controller if he so desires.

To be honest, one of our favorite features is that the game cartridges do not stick up from the back of the case when inserted. He included just enough room to allow the game to be completely hidden while playing. Nice job!

Continue reading to see a video build log and demonstration of his portable N64.

Continue reading “Awesome Portable N64 Keeps Your Games In Hand, Out Of Sight” →

N64Boy Advance

March 17, 2011 by Brian Benchoff 11 Comments

[Hailrazer] found a Game Boy Advance carrying case in his closet and thought he could pull off an N64Boy Advance in a few weekends. Despite the fast build time, [Hailrazer] built something that wouldn’t look out of place sitting on a shelf at a toy store.

This isn’t the first time we have covered an N64 Advance portable gaming system that uses a GBA carrying case, but this hack keeps the original styling of the Game Boy Advance without all the epoxy, bondo and sanding. Inside is a 4.3″ screen, GameCube joystick, N64 expansion pack, and enough Li-ion to get 5-6 hours of play time. The build doesn’t include a D-pad because [Hailrazer] doesn’t use that while playing. It also doesn’t have controller or A/V ports, because he doesn’t, “want to sit around with friends playing N64 on a 4.3″ screen.” A very pragmatic build, indeed.

We love seeing people re-purpose odd bits of plastic they have lying around, so we’re wondering when someone with an Original Game Boy Carrying Case will build an NESBoy. Video after the jump.

Continue reading “N64Boy Advance” →

Portable Gaming For Retro Console Lovers

February 28, 2011 by Mike Nathan 10 Comments

atari_2600_portable

There have been a fair share of portable video game console conversions over the years, but few tug at our retro-loving heart strings more than this one. Modretro forum member [Mario] constructed a fantastic looking portable Atari 2600 using a Flashback 2 Atari console clone.

He hacked apart the Flashback board to fit inside a small plastic case, then added a 3.5″ LCD screen, as well as some donated controller bits from other portable game systems. A pair of rechargeable batteries were added along with a small amplifier and speaker for sound.

While the Flashback comes with 40 games built in, he really wanted to add a cartridge port, so with the little bit of space he had left in the case, he did just that. When everything was finished, he sprayed on a few coats of retro orange paint and called it a day. Really the only thing that’s missing is some nice fake wood veneer and maybe some shag carpet.

Continue reading to see his portable creation in action.

Continue reading “Portable Gaming For Retro Console Lovers” →

Global CALCnet: Your TI-83 Just Acquired Internet

February 22, 2011 by Mike Szczys 16 Comments

Global CALCnet lets you connect your TI graphic calculator to the Internet and use your favorite services like instant messaging and Internet relay chat. It also provides the option of worldwide multiplayer functionality for games ported to the device such as Scorched Earth and Tetris. We looked in on [Christopher Mitchell’s] CALCnet in December when it was being used to create local area networks with the adding machines. He’s taken that up a notch with a helping hand from Arduino. An Arduino board is used to connect the serial communications from the calculator to an Internet connected PC via the Arduino’s USB capabilities.

Think this will waste a lot of time in schools? Unlikely since an Internet connected computer is integral for this system to work. If you have a computer in front of you why waste time on the calculator network? Still, how hard would it be to build a WiFi module that can directly connect them to an access point? That may be a moot point as the Slashdot article that pointed us to global CALCnet also links to a calculator port of DOOM. It runs quite well, as you can see in the video after the break. This is a must-have for anyone owning a TI Nspire that can run it.

Continue reading “Global CALCnet: Your TI-83 Just Acquired Internet” →

N64 Advance Portable Gaming System

February 5, 2011 by Mike Nathan 20 Comments

n64_advance

Like many people [Kyle] loves the Nintendo 64 and decided he wanted a portable version of his beloved console so he could play games while on the move. One year, two PSOne screens, and three N64 consoles later, his vision is complete. A Game Boy Advance travel case was gutted and used to house the console, hence the “N64 Advance” moniker. Like many others, his project uses a PSOne screen for the display, and a Li-Poly battery pack that provides up to 3.5 hours of playing time. He made sure to include other members of the Nintendo family in his build by adding a pair DS Lite speakers to the mix.

This build also includes some nice “extras” such as having the N64 RAM expansion pack built-in, headphone and A/V out ports (with a screen kill-switch for TV use), and an external controller port that can be used by either the first or second player. Be sure to check out the video of his build after the jump.

Continue reading “N64 Advance Portable Gaming System” →

Update: Microtouch The 8-bit Ipod Touch

January 31, 2011 by Chris Nelson 58 Comments

It looks like [rossum] and [Ladyada] have teamed up and been busy working on the microtouch. Since we covered it last year its had a few minor improvements like an upgrade to the ATmega32u4 microprocessor and some new software. The new and improved microtouch also features an accelerometer as well as some software to go along with it. Plus its now for sale on adafruit for about a quarter the price of an ipod touch (just in case you don’t feel like making your own).

For the unaware the microtouch is a lightweight AVR based ipod touch. It comes with a bootloader which allows you to download your “apps” to the microtouch without the need for an AVR programmer. While it may lack some of the computing power and features of the ipod touch (like music), the microtouch is definitely appealing for its open hardware/software and easy to use touch screen.