Hackaday Prize Semifinalist: Water Quality Monitoring

The theme of this year’s Hackaday Prize is to build something that matters, and there is nothing more important than water quality and pollution. Everything we eat and drink is influenced by the water quality in rivers and reservoirs. C4Derpillar, a semifinalist for the Hackaday Prize, is solving the problems of water-related health issues with innovative sensors for under $500 USD per unit.

The C4Derpiller is using capillary electrophoresis (CE) to detect anions and cations in waterways. CE pulls a water sample through a very thin tube with an electric current. As water is moving through this capillary, a sensor is able to detect heavy metals, pesticides, and other pollutants in a water supply. The team behind C4Derpiller has written a few posts about the separation chemistry of their device

Commercial CE equipment costs tens of thousands of dollars. The team behind the C4Derpillar are hoping to develop their pollution monitoring device and make it available for about $500 USD. That’s cheap enough for multiple pollution monitoring stations in the third world, and by pushing the results to the cloud, the C4Derpillar will be able to monitor pollution in real time.

You can check out C4Derpillar’s Hackaday Prize video below.

The 2015 Hackaday Prize is sponsored by:

Continue reading “Hackaday Prize Semifinalist: Water Quality Monitoring”

Hackaday Prize Semifinalist: CANcrusher

In 2007, everyone discovered you could blink an LED with an Arduino. A few years after that, someone discovered you could make a PID controller work with an Arduino, and a great number of sous vide cooker hacks showed up on the Internet. Trends in electronics projects come and go, and this year we have CANbus sniffers and development platforms. One of these CAN dev platforms, CANcrusher, is a semifinalist for the Hackaday Prize, and does a great job at poking and prodding a CANbus.

Like a lot of very excellent projects, the CANcrusher is based on a Teensy 3.1 microcontroller. This, along with the MCP2515 CAN controller gives the CANcrusher three independent CAN channels supporting DW-CAN, SW-CAN, and LSFT. The software for the device can stream data directly to a computer over USB.

Simply providing an interface for a CAN bus is something that has been done to death, and to improve upon the many CANbus projects out there, the CANcrusher is adding Bluetooth, a GSM radio, SD datalogging, and a real time clock. It’s a great project for the Hackaday Prize with multiple videos explaining how it works and what it can do. You can check out the entry video for the CANcrusher below.

The 2015 Hackaday Prize is sponsored by:

Continue reading “Hackaday Prize Semifinalist: CANcrusher”

10 Best Product Finalists Announced

The Best Product competition within the 2015 Hackaday Prize highlights the work it takes for any hardware developer or startup to move from prototype to a manufacturable product. To compete, each entry had to go well beyond the standard requirements of the Hackaday Prize with more in-depth documentation, and by shipping three working beta units to Hackaday for judging.

The 10 Finalists featured below are all exceptional and will compete for the next four weeks to be named The Best Product. In addition to the top spot, they will secure a $100,000 cash prize, a six month residency in the Supplyframe Design Lab in Pasadena, California, and help with making connections needed to move their product forward. This is the perfect contest for product engineers, hardware startups, or anyone else who can design the next great thing.

We spent last week judging all the entries for the Best Product contest, and the results are in. Who are the winners? Which products are moving on to the next round of judging? See the full details of all Best Product finalists or browse a summary of each below, presented in no particular order whatsoever.

Continue reading “10 Best Product Finalists Announced”

100 Semifinalists For The 2015 Hackaday Prize

Entries for the 2015 Hackaday Prize — the nine-month design contest that challenges you to build something that matters — closed one week ago today. There were over 900 entries and everyone at Hackaday has been blown away by the different approaches used to solve problems affecting a large number of people, and at the huge body of Open Hardware that has been documented by the process.

Today it is our pleasure to announce the 100 Semifinalists who will move on to the next round. Congratulations to you all on this accomplishment. These designs will continue to be refined as we approach the September 21st deadline where 10 finalists will be chosen by our expert judging panel: Akiba, Pete Dokter, Lenore Edman, Limor Fried, Jack Ganssle, Dave Jones, Heather Knight, Ben Krasnow, Ian Lesnet, Windell Oskay, Micah Scott, and Elecia White. The 10 finalists will go on to compete for the Grand Prize: A Trip into Space or $196,883.

For those who didn’t move on to the Semifinal round, please do not take this as a strike against your work. Don’t stop now, your ideas can still change the world!

Best Product finalists were announced in this post.

Browse the 2015 Semifinalists List or the full list of entries.

Continue reading “100 Semifinalists For The 2015 Hackaday Prize”

Hackaday Prize Entry: Feral Cats Phone Home With Das Katzetelegraf

Feral cats are a huge problem in some areas. Roaming freely in cities and in rural settings and reproducing with reckless abandon, colonies of feral cats can exhibit nuisance behavior that often results in unpleasant measures being taken to control their population. More humane programs, such as trap-neuter-return (TNR), seek to safely trap cats, give them basic vaccinations and neuter them, and either return them to their colony or, for a lucky few, ready them for adoption. Such programs are proving successful, but are not without issues. Enter Das Katzetelegraf.

You don’t need to understand a lick of German to figure out exactly what Das Katzetelegraf does from its name. Consisting of an Arduino, a GSM module, and a simple magnetic reed switch attached to the door of a humane cat trap, Das Katzetelegraf sends a text message to a TNR program volunteer when a cat has been trapped. Instead of waiting in the trap for the TNR workers to make daily rounds, the cats are quickly retrieved and the trap is reset for the next cycle. This reduces the time the cat spends in the trap, stressed and without access to food or water, and improves the animal’s outcome. As a bonus, each trap’s throughput is increased, so more animals can be cycled through the TNR program.

TNR can really help reduce feral cat populations, and Das Katzetelegraf can make them even more effective. But if you just have a stray cat pooping up your garden, a Raspberry Pi cat-deterring sprinkler might be a better choice.

The 2015 Hackaday Prize is sponsored by:

Hackaday Prize Entry: Twitter Goes To The Dogs With Raspberry Pi Hack

Dogs are remarkable creatures. Anybody who has lived with one will know that they are very vocal beasts, with barks that range from noting the presence of a squirrel in the yard to the warning whine that says “I am about to pee on your shoes if you don’t take me outside.” [Henry Conklin] decided to computerize the analysis of these noises, putting his dog [Oliver Twitch] on Twitter so he could hear what he was saying while he was at work. [Henry] that is: [Oliver] stays at home.

He did this using a Raspberry Pi, which is set to record sound above a certain volume. With the system sitting by [Oliver’s] favorite window, this records his barks. The recordings are then analyzed using PyAudioAnalysis, a library that analyzes sounds, compares them to reference ones and classifies them.  The Raspberry Pi then posts the results onto twitter using Python-twitter.

The setup used by [Oliver] to capture the barks: a USB microphone, Raspberry Pi and WiFi USB dongle.
The setup used by [Oliver] to capture the barks: a USB microphone, Raspberry Pi and WiFi USB dongle.
Or rather, it will when [Henry] fixes a few bugs: right now it just posts a random string that is based on the length of the bark, not the type. [Henry] says he is working on the dog translation at the moment. It’s still a neat project that shows you how simple it is to use a few small bits of code to gather info from your environment and share these over the Internet. [Henry] also says that the next step is creating a weekly podcast for [Oliver]. I, for one, will be subscribing to hear his thoughts on how annoying the postman is, and how vexing it is to see a squirrel and not be able to chase them.

The 2015 Hackaday Prize is sponsored by: