Multiple Marble Machine Mayhem

April 18, 2012 by Jeremy Cook 12 Comments

If you like marble machines, or if you simply like alliteration, prepare to be amazed. [Denha] apparently has had a lot of time to spare over the years, as the marble machine collection he’s amassed is quite incredible. Dating back to 2009, the collection includes relatively simple machines, like the one pictured at the beginning, to one that includes physical logic gates around 5:30.

Interestingly enough, even the “simple” one that consists of two mechanisms to lift the marbles and a slide has a trick up it’s sleeve. The slide is actually modular, so that you can use the same “pumping” mechanism with different slide designs. Not that this is the only “pump” design, the last machine featured a marble lifting mechanism with an ingenious linkage assembly that translates the motion of a motor into a sort of lifting hand.

If this wasn’t enough Maddness, there is another marble-lifting surprise awaiting you in the video after the break around 4:35! Continue reading “Multiple Marble Machine Mayhem” →

Portal Radio Is Why Valve Needs To Build Hardware

April 16, 2012 by Brian Benchoff 19 Comments

We’ve seen Portal gun builds, a few cute turret replicas, and even a miniaturized version of GLaDOS, but [John]‘s Portal radio replica is the first physical version of this oft-forgotten Portal item.

Interestingly, the entire radio is made from scrap. The spheroid body shell is made from the foam insulation from a commercial freezer, carefully sculpted, Bondoed, and painted over the course of 300 hours. The radio guts are taken from an upcycled radio, and powered by either an internal battery or a wall wart DC adapter – perfect for carrying around a test chamber with a portal gun.

Right now, there’s an AM/FM receiver inside the radio along with an audio input so an iPod or such can be plugged in. While we would have loved to see a loop of theuptempo version Still Alive, we’re guessing [John] hasn’t found an easy way to do that with junked parts yet.

Check out [John]‘s build video after the break.

Continue reading “Portal Radio Is Why Valve Needs To Build Hardware” →

Tiny Quadcopter Gets An Update, On The Verge Of Flying Without PC

April 16, 2012 by Caleb Kraft 15 Comments

Crazyflie, the itty bitty quadcopter that uses a PCB for its frame is at the cusp of being able to fly without a PC. We were enamored with it when we first spotted it, and the Crazyflie has only gotten better. As you can see, a new PCB gives it a slightly more stylized look, but that’s not all. There have been major improvements to the design of the software, and various parts of the hardware. They’re waiting for the final prototype to arrive from the factory to test the ultimate goal, PC-less flight. We’re not sure why this tiny quadcopter is so enthralling, but it sure has us captivated.

Be sure to check out another flight video after the break.

Continue reading “Tiny Quadcopter Gets An Update, On The Verge Of Flying Without PC” →

Barrel Organ Made From Lego Plays The Star Wars Theme

April 15, 2012 by Mike Nathan 36 Comments

Whether or not you are a fan of the first installment of the Star Wars prequels, you have to see what [Lorenz Lnggrtnr] and [Renee Hoffmeister] have put together for the movie’s 3D debut.

In an attempt to capture the essence of Star Wars in a new fashion, they constructed a large barrel organ from Lego bricks that plays the movie’s legendary opening theme when turned. The barrel is separated into four parts, each representing one of the series’ iconic settings in plastic block form.

Hoth, the Death Star, Tatooine, and Endor are all featured on the organ, with each environment’s structures playing specific notes from the song. As the barrel turns each Lego structure toggles a note to be played on the attached organ, via a “reading” mechanism built from metal arms and Lego tires.

It looks fantastic, and sounds pretty decent too. Be sure to stick around for a short video that shows off the barrel organ in action.

[via Wired]

Continue reading “Barrel Organ Made From Lego Plays The Star Wars Theme” →

Water Strider Robot Does It With Lego Parts

April 10, 2012 by Mike Szczys 12 Comments

This Lego watercraft uses drinking bottles as pontoons arranged in a pattern that make it look very much like a Water Strider, the insects that dance on the surface of a lake.

After the break you can see a video of the rig gracefully navigating a local pond, along with a raft of ducks. It’s quiet enough not to startle them, which is nice. We don’t get a good look at the propulsion system, but [Vimal Patel] calls the floats “hockey bottles” in his Flickr comments. They appear to be Lego themed and we’re wondering if they are some type of packaging for a small set that doubles as a sports drinking bottle once the pieces are removed? The rig includes a camera which provides a great persepcive very near the water level.

This isn’t his only floating creation. He’s got a second rig that was used to film some of the footage of this one.

Continue reading “Water Strider Robot Does It With Lego Parts” →

The Teensiest Atari 2600 Ever

April 7, 2012 by Brian Benchoff 15 Comments

[Dablio] sent in an awesome console mod he made. It may just be the smallest Atari 2600 ever (Portuguese, here’s the Google translation).

The build began with a Dynacom MegaBoy, from the same company that put out many less-than-legal 2600 clones. The MegaBoy PCB is an exercise in parsimony consisting of only a single IC, a crystal, and some resistors and caps. [Dablio] made a new PCB board based on the schematic he reverse engineered and this thing is tiny. It’s much smaller than even the smallest [Ben Heck] 2600 console build.

[Dablio] now needed a case for his new console. He had originally planned to mount the whole thing in an Atari controller like this commercial product. Serendipity intervened and he realized the entire system (sans cartridge port) fit inside a plastic tube of m&m minis.

Currently, [Dablio] has two ports on his ‘Atari tube of m&ms’ – the largest is the cartridge slot, and a small VGA port sits in the lid of the tube. This VGA port carries the power supply, controller, sound and video signals to and from the console.

[Dablio] sent in a bunch of pictures of his build which are in a gallery after the break. Now for the million-dollar question: anybody know where to buy one of these Dynacom MegaBoys?

Continue reading “The Teensiest Atari 2600 Ever” →

Make Your RC Car Drive Itself With This Simple Brain Swap

April 4, 2012 by Mike Nathan 13 Comments

arduino-rc-conversion

If the kids have lost interest in that RC car or truck you bought them over the holidays, [Randy Sarafan] from Instructables has a few ideas that might help make the toys fun again, while teaching your kids a bit about electronics in the process. In his writeup, he shows how to swap out the brains of your run of the mill RC truck, enabling it to do far more than was originally intended. The procedure is pretty simple, and something that you can easily involve your kids in, if you’d like.

He uses an Arduino and a motor shield to keep the conversion simple, but this can be done with just about any capable microcontroller you might have on hand. [Randy] added a Parallax Ping sensor to the front of the truck enabling it to avoid objects as it drives itself, but since he cut out the truck’s original control board we’re assuming that there’s no way to override the truck’s actions at present.

[Randy] calls the conversion a “robot” though it seems like more of a semi-autonomous rover if you ask us. Regardless, revamping an old RC car is certainly far better than letting it collect dust on a shelf, or worse, tossing it out during spring cleaning.

Continue reading to see a short video of [Randy’s] RC truck in action.

[via HackedGadgets]

Continue reading “Make Your RC Car Drive Itself With This Simple Brain Swap” →