Competitive Soldering Gets Heated At Hackaday Superconference

November 3, 2018 by Brian Benchoff 20 Comments

The Hackaday Superconference is in full swing, and in addition to the greatest hardware hackers, a great gathering of tinkerers, awesome talks, badge hacking, and so much more, we’ve also got competitive soldering. This year, we’re making soldering competitive with the SMD Solder Challenge. It began Friday morning as hackers go heat to head, hand soldering frustratingly tiny parts.

The rules are simple: you’re given a light, a magnifying glass, some solder, wick, flux, and the standard Hakko soldering iron (with the standard tip). The task is to solder up our own special version of the SMD Challenge Kit from MakersBox that includes an SOIC8 ATtiny85 to drive LED/resistor pairs in 1206, 0805, 0603, 0402, and 0201 packages. Scoring is based on time, completion, functionality, neatness, and solder joint quality. May the steadiest hands and sharpest eyes win.

Already, we’ve gone through a few heats of the SMD Soldering Challenge where six hackers sit down, are given five minutes of inspection time, and then whip out their irons. All of this is run by our very own [Al Williams], who serves as the ultimate arbiter of what good soldering is. It’s an amazing competition, and if you don’t think 0201 packages are hand-solderable, you haven’t seen the attendees at the Hackaday Supercon. The top times, by the way, are between 20-30 minutes to complete the entire challenge, with [Sprite_tm] currently at the top of the leaderboard.

You can check out all the talks from the Hackaday Superconference over on our live stream, where we’ll (eventually) be announcing the winners of the SMD Soldering Challenge and the winners of the badge hacking competition later on. Don’t miss the announcement of the winner of the 2018 Hackaday Prize later on this evening!

Competitive soldering

Kapton tape and tweezers at work

Livestream The Hackaday Superconference

November 3, 2018 by Mike Szczys 3 Comments

[youtube=https://www.youtube.com/watch?v=4WxPGLsdbB8&w=560&h=315]

The Hackaday Superconference is happening right now and you can join in on the Livestream. Talks begin at 10 am Pacific time on Saturday and Sunday.

The live stream covers one of two stages at the ultimate hardware conference. Topics focus on hardware creation, ranging from silicon chip fabrication, drop-in circuit designs, firmware frameworks, and 3D printing orbital rockets, to abusing printer cartridges, placing circuits on odd substrates, lighter-than-air electronics, and better techniques for building tech in garments, jewelry, props, and other wearables. Saturday evening you can watch as the Hackaday Prize is awarded live on stage, and Sunday afternoon’s festivities show off hardware and software skills with the badge hacking presentations.

There is so much more going on at Supercon besides the talks. The hacker village began Friday morning and continues through the weekend as badge hacking, the SMD soldering challenge, and other shenanigans continue. Get the inside scoop on those happenings by joining the live chat and following Hackaday on social media with #Supercon.

These Are The 100 Finalists In The Hackaday Prize

November 2, 2018 by Brian Benchoff 3 Comments

The Hackaday Prize is the greatest hardware competition on the planet. It’s the Academy Awards of Open Hardware, and over the last few years we’ve been doing it, we’ve seen literally tens of projects that have gone from an idea to a prototype to a finished project to a saleable product. It’s the greatest success story the Open Hardware community has.

Over the last eight months, we’ve been deep in the weeds with this year’s Hackaday Prize. It’s five challenges, with twenty winners per challenge. That’s one hundred projects that will make it to the semifinals in the hopes of becoming the greatest project this year. Only one will make it, but truthfully they all deserve it. These are the one hundred finalists in the Hackaday Prize, all truly awesome projects but only one will walk home with the Grand Prize. Continue reading “These Are The 100 Finalists In The Hackaday Prize” →

This Weekend: The Greatest Hardware Conference

October 31, 2018 by Brian Benchoff 4 Comments

The Hackaday Superconference is this weekend and it’s the greatest hardware con on the planet. Tickets are completely sold out, but you can still get in on the fun by watching the livestream and joining Supercon chat.

For everyone who will be here in person, the entire Hackaday crew is busy as beavers preparing for your arrival. We’re assembling badges, rigging AV for the talks, stuffing goodie bags, calling caterers, and taping cables to the floor. This is by far the biggest Superconference yet.

Doors open at 9 am Friday at the Supplyframe HQ. This is your first chance to get your hands on the fantastic Supercon Badge that’s a freakin’ computer. The day is filled with badge hacking, workshops, badge talks, and a launch party. [Rich Hogben] and [Andrew Bakhit] will be doing live IDM sets on Friday night, as we celebrate into the wee hours of the morning.

Saturday, doors open at 9 am over at the Supplyframe Design Lab as we turn on the livestream and get the main event under way with over 50 speakers and workshops. Badge hacking continues throughout the weekend, and this year we’ve added the SMD Soldering Challenge to the fun. There will be meetups during Supercon; the Tindie meetup and the amateur radio meetup are both Saturday at 1 pm.

Subscribe to Hackaday on YouTube and follow us on Facebook to keep up with everything going on.

The Incredible Judges Of The Hackaday Prize

October 29, 2018 by Brian Benchoff No comments

The time to enter The Hackaday Prize has ended, but that doesn’t mean we’re done with the world’s greatest hardware competition just yet. Over the past few months, we’ve gotten a sneak peek at over a thousand amazing projects, from Open Hardware to Human Computer Interfaces. This is a contest, though, and to decide the winner, we’re tapping some of the greats in the hardware world to judge these astonishing projects.

Below are just a preview of the judges in this year’s Hackaday Prize. They’ve been busy looking over all of the finalists and on Saturday we’ll announce the winners of the Hackaday Prize at the Hackaday Superconference in Pasadena. This is not an event to be missed — not only are we going to hear some fantastic technical talks from the hardware greats, but we’re also going to see who will walk away with the Grand Prize of $50,000.

Quinn Dunki

The mighty Quinn has been making games for 36 years on platforms ranging from the Apple II to all manner of newfangled things. She currently manages engineering for mobile games at Scopely, and pursues consulting, independent development, mixed-media engineering projects, and writing. Quinn is best known to the Hackaday crowd for Veronica, the 6502 system with everything and the kitchen sink on a backplane. It’s got PS/2, VGA, and Pong in ROM. The build log for Veronica has been an inspiration to many, and served as the basis for numerous homebrew systems. She continues to inspire with her blog, her YouTube Channel, and of course her Hackaday articles.

Eben Upton

In his earlier life, Eben founded two successful mobile game and middleware companies, but right now he’s most famous for founding the Raspberry Pi foundation and serving as the CEO of Raspberry Pi (Trading) LTD. Under his leadership, the Raspberry Pi has grown from some weird looking board with a USB port on one end, HDMI on the other, and a camera stuck in the middle. After months of work, hopes this computer might not be vaporware grew, and now the Raspberry Pi is the best-selling computer ever made (with apologies to the engineers behind the best selling home computer ever made).

Lauren McCarthy

Lauren McCarthy is an artist based in Los Angles and Brooklyn whose work explores systems for being a person and interacting with other people. She is an Assistant Professor at UCLA Design Media Arts, a Sundance Institute Fellow, and was previously a resident at CMU STUDIO for Creative Inquiry, Eyebeam, Autodesk, and more. Lauren’s work has been exhibited internationally, at places such as Ars Electronica, Fotomuseum Winterthur, SIGGRAPH, Onassis Cultural Center, IDFA DocLab, and the Japan Media Arts Festival. She is the creator of p5.js, an open source platform for learning creative expression through code online.

Chris Anderson

From 2001 through 2012, Chris was the Editor in Chief of Wired Magazine, but now he’s the CEO of 3DR and founder of DIY Drones and DIY Robotcars. These Robocar races are held monthly-ish, and have so far proven an ideal platform to teach kids STEM, and have become something like the next generation of BattleBots, only with a few more computer vision algorithms and a few less RC transmitters. In addition to Robocars, Chris is one of the greatest advocates for flying drones, including those of the fixed-wing variety.

These are just a few of the amazingly accomplished judges we have lined up to determine the winner of this year’s Hackaday Prize. The winner will be announced on November 3rd at the Hackaday Superconference. If you can’t join us in person, don’t worry. We’re going to be live streaming everything, including the prize ceremony, where one team will walk away with the grand prize of $50,000. It’s not an event to miss.

Supercon Is Sold Out, Join Us On The Live Streams And Chat Rooms

October 29, 2018 by Mike Szczys 1 Comment

Over the weekend, the last available tickets to the Hackaday Superconference vanished. This will be the fullest, most exciting, hack-packed Supercon ever.

We’ve always had a stunning slate of speakers. It’s hard to objectively say we will top previous years, but yes this collection of talks is an insane concentration of hardware speakers that tops anything we’ve seen before. You can’t look at the schedule without feeling an electric jolt of excitement. The good news is you can still get in on those talks. Bookmark this Hackaday Superconference Live-Stream which begins at 10 am PDT on Saturday, November 3rd.

Of course, talks are only one component of Supercon. The secret sauce has always been the people at the con. If you’re not joining us, we still need you to take part. There is a conference chat on Hackaday.io and all are welcome. Pop in and visit with people at the con, and others around the globe who wish they could have made it in person.

Make sure you’re on the live stream Saturday evening to watch as the Grand Prize is presented on stage during the Hackaday Prize Ceremony. Follow along throughout the weekend on social media with the #Supercon tag. Pop into the chat and ask for updates on badge hacking, the SMD Soldering Challenge, and all of the other shenanigans that make Supercon super. We look forward to seeing hundreds of you in Pasadena starting this Friday, and thousands of you online through out the weekend!

Hackaday Links: October 28, 2018

October 28, 2018 by Brian Benchoff 11 Comments

Steve Jobs was actually a good designer and CEO. This is a statement that would have been met with derision in 2010, with stories of a ‘reality distortion field’. We’re coming up on a decade in the post-Jobs era, and if there’s one thing the last seven or eight years can tell us, it’s that Jobs really, really knew how to make stuff people wanted. Apart from the iPhone, OS X, and the late 90s redesign of their desktops, the most impressive thing Jobs ever did was NeXT. Now there’s book that describes the minutia of all NeXT hardware. Thanks to the Adafruit blog for pointing this one out.

Speaking of Apple, here’s something else that’s probably not worth your time. It’s a highly exclusive leak of upcoming Apple hardware that’s sure to change everything you know about tech. Really, it’s a floating hockey puck branded with the Apple logo. No idea what this is, but somebody is getting some sweet, sweet YouTube ad revenue from this.

A few years ago, [Tom Stanton] built an electric VTOL plane. It looked pretty much like any other foam board airplane you’d find, except there were motors on the wingtips a lá an Osprey. Now, he’s massively improving this VTOL plane. The new build features a 3D printed fuselage and 3D printed wing ribs to give this plane a proper airfoil. Despite being mostly 3D printed, this VTOL plane weighs less than half of the first version. Also, a reminder: VTOL planes (or really anything that generates lift from going forward) are the future of small unmanned aerial craft. Better get hip to this now.

Next weekend is the Hackaday Superconference, and you know we’re going to have an awesome hardware badge. It’s a badge, that’s a computer, and has a keyboard. What more could you want? How about an expansion header? Yeah, we’ve got a way to add a shift register and 8 LEDs to the badge. From there, you can do just about everything. Who’s going to bring an old parallel port printer?