Hacker Finds Better Use For A Windows Machine

March 1, 2010 by Mike Szczys 34 Comments

[Patrick Becker] had an ancient PC on his hands with a blown PSU. He converted this into a stylish home for his Betta splendens.

The aquarium itself is fashioned from a piece for construction glass block with the top cut off. This allows for a window that looks through the tank and shows off the motherboard on the other side. He patched into the AC connector so that the original power cord can be used to control the pump. A lighted pump button was added to the front panel and a fancy bezel fitted to the viewing portal in the side of the case. He finished off the project with a PVC pipe for air and food. His blue screen of death now features water and a real fish.

Cooling LEDs By Heating The Water Saves On Electricity

February 26, 2010 by Mike Szczys 32 Comments

[Matthias] swapped out his twin-tube florescent aquarium lights for LEDs. By running tank water through the aluminum LED mounts he’s transferring excess heat into the water in the tank, in turn saving some of the electricity that would have been used to heat the tank. Couple this with roughly 35 Watts saved by moving away from fluorescent tubes and he’s got a great energy-saving hack. The LEDs used in the last aquarium light conversion were cooled by heat sinks and fans. We’d love to see this concept incorporated into that design.

Salty LEDs

January 29, 2010 by Mike Szczys 34 Comments

[Davross] pulled off an LED lighting build for his coral aquarium. The module consists of a wooden body holding a 3×16 grid of LEDs. They are mounted to heat sinks which themselves have cooling fans to help keep those puppies from melting. The system is controlled by an Arduino which allows for almost limitless lighting options. The photo above shows the LEDs running at 50%. He’s also taken some photos of the tank in “moonlight” mode. It’s a long and detailed forum thread but you can skip to some nice photos of the coral under the lights or details about the build.

[Thanks Passmadd]

NXT Hacks: Tanks And Heaters

January 20, 2010 by Mike Szczys 8 Comments

Here’s a double-dose of Lego NXT goodness; a robotic tank and an automatic aquarium heater.

The image to the left is a robotic tank powered by the popular Lego Mindstorms NXT kit. The brains rest inside of a tube, including the controller brick, ultrasonic range finder, a gyroscope, and a compass. Two sets of treads surround each edge of the tube making us wonder which end is up? We’ve embedded a video of this beast after the break. You’ll see that the tank is incredibly agile in this configuration.

To the right is an aquarium heater. [Dave’s] kid were growing some tiny water dwellers which we’ve always know as Sea-Monkeys. The problem is that the tank needs to be between 72-80 degrees Fahrenheit for the little shrimp to thrive. He dug out his NXT controller and paired it up with the Lego temperature sensor and a dSwitch relay. This setup monitors the Aquarium for temperatures between 72-78 degrees and switches a lamp on an off to regulate the temperature. This keeps his kids and the stagnant pool happy.

Now that we’ve whet your appetite for NXT check out the wiimote operated NXT Segway and the NXT Sudoku solver.

Continue reading “NXT Hacks: Tanks And Heaters” →