presence

3 Articles

Presence Sensor Locks Computer When You Step Away

July 2, 2023 by 14 Comments

Having a computer that locks its screen after a few minutes of inactivity is always a good idea from a security standpoint, especially in offices where there is a lot of foot traffic. Even the five- or ten-minute activity timers that are set on most workstations aren’t really perfect solutions. While ideally in these situations we’d all be locking our screens manually when we get up, that doesn’t always happen. The only way to guarantee that this problem is solved is to use something like this automatic workstation locker.

The project is based around the LD2410 presence sensor — a small 24 GHz radar module featuring onboard signal processing which simplifies the detection of objects and motion. [Enzo] paired one of these modules with a Seeed Studio XIAO nRF52840 development board to listen to the radar module and send the screen lock keyboard shortcut to the computer when it detects that the user has walked away from the machine. The only thing that [Enzo] wants to add is a blinking LED to let the user know when the device is about to timeout so that it doesn’t accidentally lock the machine when not needed.

One of the parts of this build that is a little bit glossed over is the fact that plenty of microcontroller platforms can send keystrokes to a computer even if they’re not themselves a USB keyboard. Even the Arduino Uno can do this, so by now this feature is fairly platform-agnostic. Still, you can use this to your advantage if you have the opposite problem from [Enzo] and need your computer to stay logged in no matter what.

Presence-Detecting Cushion Keeps You From Sitting Your Life Away

August 11, 2022 by 13 Comments

They say that sitting is the new smoking. They’re wrong — smoking is much, much worse, for you than sitting, and smoking only while standing or while jogging around the block in no way to justify the habit. But they’re also not wrong that humans weren’t made for extended periods parked on their posteriors, but we do it anyway, to the detriment of our heart health, posture, and general well-being. So something like this butt-detecting stand-up reminder could make a big difference to your health.

While like many of us, [Dave Bennett] has a wearable that prompts him to get up and move around after detecting 30 minutes of sitting, he found that it’s too easy to dismiss the alarm and just go right on sitting. Feeling like he needed a little more encouragement to get up and go, he built a presence detector completely from scratch. His sensor is a sheet of static-protective Velostat foam wrapped in conductive tape; when compressed, the resistance across the pad drops, making it easy to detect with a simple comparator circuit.

We admit to getting excited when we first saw the alarm circuit; a quick glance at the schematic seemed like it was based on a 555, which it totally could be. But no, [Dave]’s design goals include protection against spoofing the alarm with a quick “cheek sneak,” which was most easily implemented in code. So that 8-pin device in the circuit is an ATtiny85, which sounds the alarm after 30 minutes and requires him to stay off his butt for a full minute before resetting. The video below hits the high points of design and shows it in use.

Annoying? Yes, but that’s the point. Of course a standing desk would do the same thing, but that’s not going to work for everyone, so this is a nice alternative.

Continue reading “Presence-Detecting Cushion Keeps You From Sitting Your Life Away” →

“Hey! Don’t Lock The Door, I’m In Here!”

November 13, 2017 by 24 Comments

Those that work in front of a computer for a living spend most of the time making very little sound. Unless you’re a member of the clicky mechanical keyboard club, your working time is a low-observables time during which people can forget about you. You can make sure you’re not overlooked with this smartphone hotspot presence detector.

[Emilio Ficara]’s quiet work habits resulted in his housemates locking him in sometimes, to his inconvenience. PIR or microwave occupancy sensors might have worked to fix the problem, except that a few flexing fingers aren’t always enough to trigger them. Luckily, [Emilio] is also wisely distrustful of free WiFi, so his phone is always set up as a mobile hotspot, giving him the means to reliably detect his presence. An ATtiny2313 and an ESP-01 do the business of polling for the SSID of his phone and blinking a bright blue LED by his door for his housemates. It’s not perfect, of course; it could easily be spoofed by anyone else who knows his SSID. But simple works for now.

With almost everyone carrying one now, smartphone detection is a good proxy for the presence of a person. But it doesn’t work in every case, so you may want to familiarize yourself with the aforementioned PIR and microwave methods.