Controlling A DSLR With A Nintendo DS

March 13, 2012 by Brian Benchoff 4 Comments

At Hack a Day, we’ve seen dozens of intervalometer builds that open and close a camera shutter remotely. [Luke Skaff] decided to take these builds to the next level by automating a camera’s focus and shutter with a Nintendo DS.

[Luke]’s build is based on the Open Camera Controller project that puts the power of an intervalometer, sound trigger, sequencer, and HDR bracket shooting into the hands of professional photogaphers. The Open Camera Controller is built to run on a Nintendo DS with an AVR-based card attached to the Game Boy Advance cartridge port.

The Open Camera Controller attaches to a camera’s shutter port, but [Luke] stepped things up a little bit by using a USB host controller and implementing the picture transfer protocol. Now, instead of [Luke]’s controller telling his camera when to open and close the shutter, the focus of the camera can be adjusted as well. [Luke]’s build uses an Xilinx CoolRunner-II CPLD and a USB host controller to convert the DS cartridge port to a USB port every DSLR can connect to.

[Luke] still has a mess of wires on his hand, but even we can see the power that inexpensive automation would bring to the world of digital photography.

Continue reading “Controlling A DSLR With A Nintendo DS” →

Brewtarget: Open Source Homebrewing

March 13, 2012 by Caleb Kraft 14 Comments

[youtube=http://www.youtube.com/watch?feature=player_embedded&v=BEdkZIUkvA4]

Several of us here at Hackaday Brew our own beer. Needless to say, we got a little excited when we saw members of the open source community building a brew tracking system. Brewtarget is an open source tracking system that you could download right now and begin tracking and building your recipes. It looks like there is a fairly active development group working on it and even a feature request form that seems to be filling up. Maybe we overlooked it, but there doesn’t seem to be an existing feature list. We look forward to seeing where this project goes.

Brewtarget implements BeerXML, which means it should also be compatible with Beershmith, a commercial application.

[via adafruit]

Avoid Shaky Camera Movements With Gyroscopic Stabilization

March 13, 2012 by Brian Benchoff 40 Comments

Right after “no editing whatsoever”, the “shaky camera” is the bane of YouTube viewers the world over. [David] came up with a nice solution to the problem of shaky cameras that uses gyroscopes to even out the bumps of making a great movie.

Most cameras attached to moving frames – from the zip-line cameras at NFL games to police helicopters and aerial reconnaissance drones – have some sort of gyroscopic stabilization. Even though gyroscopic stabilization has been around for more than 60 years, the designs haven’t changed that much. [David] dug up a few patents dating from the 50s and set to work replicating the design.

[David] bought a pair of [Glenn Turner]’s fabulously heavy and expensive-looking powered gyroscopes and began bolting them onto a piece of sheet metal. Per the 1950 patent, the gyroscopes were mounted 90 degrees apart and bolted onto the camera.

From the video demo (after the break), there’s a marked difference between filming a stroll though a parking lot with the gyros on and gyros off. While the pair of motor driven gyroscopes look a little ungainly and are a bit too loud for our tastes, the solution is much less expensive than the $1600 professional gyro [David] based his build on.

Continue reading “Avoid Shaky Camera Movements With Gyroscopic Stabilization” →

Control An Arduino From Android Over Bluetooth

March 13, 2012 by Brian Benchoff 10 Comments

Whether you’d like to do some real-time logging of data, or just want to control a project with your Android phone, [Thomas]’s Arduino-Android Bluetooth connection instructable is sure to be useful

[Thomas]’ build uses the very inexpensive JY-MCU Bluetooth module that’s available on eBay or dealextreme. This Bluetooth module ties directly into the Tx and Rx lines of the Arduino so a wireless serial connection between an Android device can be established. On the Android side of the build, Python for Android and the Scripting Layer for Android allow for reading wireless sensor data over Bluetooth.

While connecting an Android device to an Arduino is also possible with an IOIO or an Android Open Accessory dev kit, we haven’t seen much (barring this) about controlling or reading simple electronics with Android over Bluetooth. Sometimes you just don’t need an awesome dev board to bodge up a simple project, so we hope [Thomas]’s very nice instructable will help get a few more builds off the ground.

The Spud Gun To End All Spud Guns

March 13, 2012 by Brian Benchoff 74 Comments

In Norse mythology, Mjöllnir is the hammer of Thor, forged in a contest to create the most wondrous and munificent tool for the gods of Asgard. While we’re not aware if [MrCrowley] recently made a bet with Loki, his version of Mjöllnir, a gigantic spud gun powered by MAPP gas, is wondrous enough for our tastes.

Unlike most of the other spud guns we’ve seen, [MrCrowley] eschewed the use of PVC pipe and fittings in his build because that would explode on the first test fire. Instead, the gun uses galvanized and stainless steel for the majority of the construction. That’s not to say this spud gun is necessarily safe, though: as he demonstrates in the video after the break, golf balls exit the barrel with a comparable energy to most rifle rounds.

For an interesting take on an ignition system, [MrCrowley] built a remote ignition system out of a wireless doorbell and a 100kV stun gun. While this does allow for remote firing, the entire build seems safe enough – from behind the muzzle, at least – to be carried with a rifle strap.

It should go without saying that this is incredibly dangerous and you shouldn’t build this if you’re not planning on your last words being, “Wanna see something cool? Hold my beer.” That being said, [MrCrowley] knows what he’s doing, and you can check out the video of Mjöllnir in action after the break.

Continue reading “The Spud Gun To End All Spud Guns” →

Portal Mini Golf Hole Will Incinerate Your Ball…you Monster

March 12, 2012 by Mike Nathan 38 Comments

portal-golf-hole

One of [Tom’s] friends is celebrating a birthday soon, and he was asked to make a mini golf hole for the event. While most people would expect to bring beer or guac to the shindig, he saw this as an opportunity to bring a little bit of Portal to life.

Near the end of the first Portal game, you are forced to pitch your companion cube into the incinerator, a scene which [Tom] thought would be the perfect mini golf hole. He started out by building an iris door mechanism, which he surrounded with chicken wire and some plaster, producing a fantastic-looking waste disposal pipe.

He added a ramp that leads up to the hole, then [Tom] got busy with the electronics portion of the fixture. Once the portal button at the end of the ramp is pressed, an Arduno triggers a pair of motors to open the waste disposal door and fire up a smoke machine. The result, as you can see in the video below, is nothing short of awesome.

[Tom] says he’s in the process of building a pair of turrets and a working golf ball portal as well, so if you’re a big Portal fan, be sure to check out his site for updates.

Continue reading “Portal Mini Golf Hole Will Incinerate Your Ball…you Monster” →

Testing An Open Source PID Controller With Steak

March 12, 2012 by Brian Benchoff 20 Comments

Sous vide cookers aren’t anything new, but [Phil] wanted to build the first sous vide using the osPID, an open source PID controller just released in the last month.

The build uses the osPID Open Source PID controller we saw last week that comes with inputs for a thermocouple and pair of relays capable of switching a hot plate or immersion heater. The osPID is based on the Arduino and was created by [Brett Beauregard], author of the Arduino PID library.

Getting to the meat and potatoes of the build, [Phil] connected a 300 Watt immersion heater to the osPID and put the heater in a bowl of water. A delicious looking cut of beef tenderloin was shoved into a ziplock bag and suspended in the bowl of warm water for a few hours. With the heater and thermocouple attached to the osPID, the temperature was set at 130° F and the entire device was left alone for a few hours. Looking at [Phil]’s recipe for tenderloin with lemon parsley butter whets our taste buds, so we’ll hope [Phil]’s dinner came out just fine.