Author: Jenny List

2977 Articles

All The Air Ducting Parts You Could Ever Need

August 4, 2024 by 48 Comments

If you have ever planned an air duct or dust extraction system for your shop, you’ll know just how difficult it can be to accommodate all but the simplest of arrangements. Off the shelf systems are intended for use in home heating or other domestic systems, and offer little flexibility of choice. Of course you could 3D print an adapter or two, but [Fabian] has taken it to the next level with a comprehensive library of 3D-printable pipe system adapters and accessories. We’re not sure we’ve seen such a complete collection.

The pipes are mostly at 125 mm diameter, with the full array of elbows and joints, alongside adapters for fans and smaller pipes, and different splitter options. It becomes particularly interesting in the accessories department though, because he’s also made a set of smart addons, packing ESP32s for sensors, and even valves.

It sometimes shocks us to go into hackerspaces and see nothing in the way of extraction around tools that really need it. Airborne smoke and particulates are a proven hazard, and thus we like this project a lot. If you don’t have adequate ventilation or extraction on your bench, consider printing yourself a solution. Take a look at how one hackerspace did it.

The Atomic Gardener Of Eastbourne

August 1, 2024 by 7 Comments

Pity the video team at a large hacker camp, because they have a huge pile of interesting talks in the can but only the limited resources of volunteers to put them online. Thus we often see talks appearing from past camps, and such it is with one from Electromagnetic Field 2022. It’s from [Sarah Angliss], and as its subject it takes the extraordinary work of [Muriel Howorth], a mid-20th-century British proponent of irradiated seeds as a means to solve world hunger.

Today we are used to genetic modification in the context of plants, and while it remains a controversial subject, the science behind it is well known. In the period following the Second World War there was a different approach to improving crops by modifying their genetics: irradiating seeds in a scattergun approach to genetic modification, in the hope that among thousands of duds there might be a mutant with special properties.

To this came Muriel Howorth, at first charged with telling the story of atomic research for the general public. She took irradiated seeds from Oak Ridge in the USA, and turned them into a citizen science program, with an atomic gardening society who would test these seeds and hopefully, find the supercrops within. It’s a wonderfully eccentric tale that might otherwise be the plot of a Wallace and Gromit movie, and but for a few interested historians of popular science it might otherwise have slipped into obscurity. We’re sorry we didn’t catch this one live back when we attended the event.

Continue reading “The Atomic Gardener Of Eastbourne” →

Spin Your Own Passive Cooling Fibres

July 31, 2024 by 4 Comments

When the temperature climbs, it’s an eternal problem: how to stay cool. An exciting field of materials science lies in radiative cooling materials, things which reflect so much incoming heat that they can cool down from their own radiation rather than heating up in the sun. It’s something [NightHawkInLight] has been working on over a series, and he’s dropped a very long video we’ve placed below. It’s ostensibly about spinning radiative cooling fibers, but in fact provides a huge quantity of background as well as a bonus explanation of cotton candy machines.

These materials achieve their reflectivity by creating a surface full of microscopic bubbles. It’s the same process that makes snow so white and reflective, and in this case it’s achieved by dissolving a polymer in a mixture of two solvents. The lower boiling point solvent evaporates first leaving the polymer full of microscopic bubbles of the higher boiling point solvent, and once these evaporate they leave behind the tiny voids. In the video he’s using PLA, and we see him experimenting with different solvents and lubricants to achieve the desired result. The cotton candy machine comes in trying to create fibers by melting solid samples, something which doesn’t work as well as it could so instead he draws them by hand with a small rake.

When he tests his mat of fibers in bright sunlight the effect is almost magical if we didn’t already know the mechanism, they cool down by a few degrees compared to ambient temperature and the surrounding control materials. This is a fascinating material, and we hope we’ll see more experimenters working with it. You won’t be surprised to hear we’ve featured his work before.

Continue reading “Spin Your Own Passive Cooling Fibres” →

This Home Made Mac Has A Real CRT

July 30, 2024 by 15 Comments

Cathode-ray tube (CRT) televisions may no longer be in production, but its last bastion came in the form of extremely cheap little Chinese portable sets with a black-and-white tube. They’re now useless for broadcast TV, so can often be had for next-to-nothing. [Action Retro] has a video showing a Mac Classic clone using one, and with a built-in Raspberry Pi and a copy of RiscOS it almost makes a usable computer.

The video below the break is a little heavy on the 3D printer sponsor and the Mac case comes from a Thingiverse project, but it’s well executed and we’re grateful for being introduced to that original project. We’d have gone for a period-correct beige filament rather than the glow-in-the-dark green one used here.

We’re guessing that more than one reader will have a few of those TVs around the place, such is their ubiquity. Is it worth making this as a novelty item? It depends upon your viewpoint, but we can’t help liking the result even if perhaps it’s not for us. If RiscOS isn’t quite the thing,  there’s an option a little closer to the real thing.

Continue reading “This Home Made Mac Has A Real CRT” →

A Soviet Cassette Recorder Receiving Some Love

July 29, 2024 by 40 Comments

For those of us who lived in the capitalist west during the Cold War, there remains a fascination to this day about the Other Side. The propaganda we were fed as kids matched theirs in describing the awful things on the other side of the wall, something that wasn’t borne out when a decade or so later in the 1990s we met people from the former communist side and found them unsurprisingly to be just like us. It’s thus still of interest to have a little peek into Eastern Bloc consumer electronics, something we have the chance of courtesy of [DiodeGoneWild], who’s fixing a 1980s Soviet cassette recorder.

The model in question is a Vesna 309, and it has some audio issues and doesn’t turn the tape. It gets a teardown, the motor is cleaned up inside, and a few capacitor and pot cleanups later it’s working again. But the interest lies as much in the machine itself as it does in the repair, as it’s instructive to compare with a Western machine of the same period.

We’re told it would have been an extremely expensive purchase for a Soviet citizen, and in some ways such as the adjustable level control it’s better-specified than many of our equivalents. It’s based upon up-to-date components for its era, but the surprise comes in how comparatively well engineered it is. A Western cassette deck mechanism would have been a much more sketchy affair than the substantial Soviet one, and its motor would have been a DC part with a simple analogue speed controller rather than the brushless 3-phase unit in the Vesna. Either we’re looking at the cassette deck for senior comrades only, or the propaganda was wrong — at least about their cassette decks. The full video is below, and if you’re hungry for more it’s not the first time we’ve peered into electronics from the eastern side of the Iron Curtain.

Continue reading “A Soviet Cassette Recorder Receiving Some Love” →

You’ve Got The Portable Radio, Now What About The Antenna?

July 28, 2024 by 10 Comments

There’s an old saying in the amateur radio community that when it comes to antennas all you need is a piece of wet string. This may be a little fanciful, but it’s certainly true that an effective antenna can be made with surprisingly little in the way of conductor. It’s something [Evan Pratten VZ3ZZA] demonstrates amply with a description of the antenna he took camping in a Canadian provincial park.

Most of us would try some form of dipole on our adventures, but the antenna he’s using caught our eye as it’s described as an end-fed half-wave, but it has both a half-wave and quarter-wave element. Made from speaker cable or in this case thin mains cable for lamps, it’s obviously far from a perfect match and requires an ATU, but it generates an impressive array of FT4 contacts on a pretty meagre power level. We particularly like his in-plain-sight test run in the parking lot of a supermarket.

We frequently talk about the diversity of pursuits in amateur radio aside from that of the chequebook ham, and this project shows one of those. The world of QRP, operating at extreme low power, is not expensive to enter and can be extremely rewarding.

An RC Tracked Robot, Without The Pain

July 28, 2024 by 13 Comments

Small robots can be found at all levels from STEM toys for kids all the way through to complex hacker projects. Somewhere along that line between easy enough for anyone to build and interesting enough for hackers lies the PlayCar, from [ComfySpace]. It’s a small build-it-yourself tracked robot that’s controlled from your smartphone via an app.

At the PlayCar’s heart is a Raspberry Pi Zero 2W, and surrounding it are a set of inexpensive off the shelf modules for power and motor control. The juice meanwhile comes from a set of AA batteries, and the motors are geared DC units. Having acquired all the components, the 3D printable parts can then be downloaded from Printables, and the ComfySpace app can be downloaded for either Apple or Android platforms.

It’s clear that ComfySpace is a start-up targeting the education sector, and we wish them every success. The approach of making an open platform is one we like, as it has the potential to create a community feeding back designs and add-ons rather than remaining proprietary. You can take a  look at the video below the break for more information.

Continue reading “An RC Tracked Robot, Without The Pain” →