Author: James Hobson

1404 Articles

Microwaving Things Outside Of The Microwave!

September 11, 2015 by 48 Comments

DISCLAIMER: DO NOT TRY THIS AT HOME!

Ever wonder what would happen if you took a magnetron out of a microwave, strapped it to a stick, and pointed it at random everyday objects? Well, lucky for you a couple young Russians recorded their research before they presumably hurt themselves and were hospitalized, or maybe just became infertile — or caused cataracts — point is don’t do it.

They’ve taken a magnetron out of a microwave, and tied a soup can to the side of it to focus the microwaves. After discovering this, they did the next logical step — point it at various things and see what happens.

In this specific video (they have lots…) you can see them create plasma inside light bulbs, melt light bulbs, light up vacuum tubes, fluorescent bulbs, liquefy metal, and even catch a glimpse of radio waves.

Continue reading “Microwaving Things Outside Of The Microwave!” →

Turning Smog Into Gemstones And Pollution Awareness

September 9, 2015 by 59 Comments

Wait what? The Smog Free Project by [Daan Roosegaarde] is another one of those head scratchers where somehow art, engineering, and a designer collide — to produce what looks like an actual working concept…?

The oddly shaped white tower is essentially a massive air purifier. It’s in Rotterdam this week after over 3 years of research and development. It actually scrubs the air, removes contaminates, and then compresses those particles down into small cubes, or “gem stones”. Going full tilt, it will clean approximately 30,000 cubic meters of air per hour. Continue reading “Turning Smog Into Gemstones And Pollution Awareness” →

Skittles Sorter

Only Eat Red Skittles? We’ve Got You Covered.

September 8, 2015 by 19 Comments

Are you a bit obsessive compulsive with lots of certain things? We are too. Like Skittles! If you’re the kind of person who likes to sort their Skittles, you should seriously look into making your own 3D printed Skittles Sorter.

Built more to challenge his new 3D printer, [MrPrezident] was looking for a project to combine mechanical design with a bit of image recognition prowess — so he came up with this clever, and compact, Skittle sorting machine.

It uses an Arduino Uno with a ZITRADES color sensor module to identify the color of each candy. A small LED helps illuminate the Skittles to ensure an accurate color reading. Then, depending on the color, a series of gears rotate the Skittles piece to its designated color repository.

Theoretically it should also work with M&M’s (which are a bit smaller) but unfortunately, there are 6 colors of M&M’s and only 5 colors of Skittles. What would the machine do then!? We don’t see a reject bin!

Continue reading “Only Eat Red Skittles? We’ve Got You Covered.” →

How To Upgrade A Chinese CNC Machine

September 8, 2015 by 38 Comments

Looking to add a small CNC machine to your garage or hackerspace’s arsenal of tools? Like any tools — China has you covered for the cheap options — but the question is, is it worth it? Typically it depends on the tool, but when you can upgrade your 3040 CNC router to use USB instead of a parallel port with the TinyG motion controller… most definitely!

The 3040 or 3020 CNC router is a popular Chinese machine used by many hobbyists — and for good reason. A rigid all-aluminum frame, decent stepper motors and pretty good resolution? It’s not a bad deal for around $1000USD. We’ve covered it many times before. Problem is, the electronics are a bit out-dated. Particularly in the fact that it uses Mach3 with a parallel port… Come on, who has a parallel port these days?

[John Lauer] set out to fix this. The TinyG is a motor controller we’ve covered a few times before as well — it was just waiting to be fitted into a 3040 CNC in order to run a better control system, like ChiliPeppr!

Continue reading “How To Upgrade A Chinese CNC Machine” →

SAM Brick Layer

Brick Laying Robot Does It Better

September 7, 2015 by 60 Comments

Meet SAM, the Semi Automated Mason. SAM can lay bricks three times faster than a normal brick layer. SAM isn’t planning on taking away any jobs yet though — it still needs a human mason following behind to clean up the mortar.

The robot consists of a standard 6-axis industrial robot arm mounted to a track system with a conveyor belt style feeder of bricks. It picks up each brick, covers the side with mortar, and places it next to the last brick it laid. A mason still has to do the tricky parts, like corners and aesthetics — but SAM is getting better — it can very easily follow a pixelated map of an image and place bricks up to half an inch in or out from the wall, to create a embossed image.

Continue reading “Brick Laying Robot Does It Better” →

arduino alarm panel

Upgrading Your Alarm System With An Arduino

September 5, 2015 by 17 Comments

When [Doug] moved into his new house, he found an old alarm panel set up — but it had no monitoring service any more. Not wanting to pay a monthly fee to have it setup, he decided to try interfacing an Arduino with the system in order to push events to the net!

The cool thing is he was actually inspired by another similar project we shared on Hackaday a few years ago entitled Bending a Home Security Control Panel to Your Will. But that project only showed you how to interface the Arduino with the keypad — [Doug] went the extra mile and interfaced directly with the control board for more features.

He’s using an Arduino Uno and an Ethernet breakout board to hook it up to the network. This allows him to send text messages to himself when the alarm system is armed, disarmed, or triggered. All the code is available on GitHub in case you also have a DSC 1550 alarm system.

It’s a pretty slick hack, so don’t forget to check out the video after the break.

Continue reading “Upgrading Your Alarm System With An Arduino” →

Sphero Wasn’t Actually Behind The BB-8

September 4, 2015 by 26 Comments

Despite quite a few articles stating Sphero was behind the technology that made the real movie BB-8 droid, like this Tech Crunch article:

Sphero, makers of the eponymous spherical robots that you control with your smartphone — as well as the new BB-8 droid in Star Wars: The Force Awakens…

and this excerpt from Fortune Magazine:

The same underlying technology (made by Sphero), which was licensed to create the version of BB-8 that graced the stage at the Star Wars Celebration…

Heck, even we drank the jungle juice with our original coverage! But now it seems the truth is finally coming out. As it turns out, it was actually built in Pinewood by the Creature Animatronics (CFX) team which includes [Matt Denton] — He’s the guy who built the Mantis Robot. A hacker / engineer — not a big toy company.

Two articles released this week on StarWars.com and EmpireOnline.com name various people from the CFX team at Pinewood as having built the movie puppets and the real BB-8. No mention of Sphero at all of course. They also state that they had to come up with the technology from scratch and that nothing like it already existed.

Continue reading “Sphero Wasn’t Actually Behind The BB-8” →