Making A Spray Booth From An Old Dishwasher

August 27, 2012 by 11 Comments

For several years, [Randy]’s spray paint booth was a simple cardboard box. Sure, it kept the overspray contained to a small area, but there was a lot of room for improvement. Luckily, after replacing his dishwasher he had the makings of an excellent spray paint booth that can be put together in a few hours.

The build began by tearing apart the old dishwasher and getting rid of just about everything; the door, plumbing, and electrical were all discarded leaving [Randy] with a plastic husk. After installing a small fluorescent light, plugging the drain hole, and making a simple lazy Suzan, [Randy] had a proper spray booth on his hands.

[Randy] opted not to put in a ventilation system; he was, after all, working with non-toxic vapors. If you’re planning on gutting a dishwasher for use with some nasty chemicals, it might be a good idea to use the drain hole as a ventilation port.

Hey OEMs, Arduino Controlled Dishwasher Has Much Potential

May 26, 2011 by 44 Comments

I think we can all agree that sometimes projects are a bit of a stretch. We rack our brains for something interesting and unique to bring to the table and end up stretching for that special strange twist trick or technique that will garner that special kind of admiration from our peers. In that sense it is easy to loose sight of some of the best projects, the simple ones that prove you can fix anything anytime anywhere and improve it while you are at it.

This is just such that kind of project, [UnaClocker] had a washer fall victim to its own condensation. Instead of shelling out a ton of money for the repair man he took on the job himself, fitting the washer with an Arduino, relays and a breadboard. A little reverse engineering revealed the (notably well labeled) control board, evidently the control signals involved are extremely easy to interpret. [UnaClocker] also found a temperature sensor to control dish sanitation. At this point he had FULL CONTROL over the dishwasher and was able to design the ideal prewash/wash cycle timings.

Now that a wash cycle is all set [UnaClocker] can now go ahead and embarrass the hell out of the OEM. He plans on adding a real time clock module to time washings and a clean dish indicator, after which we think he should get rolling on some wireless/tweet/ethernet/capacitive touch/voice communication. After that he is going to work on buttoning up the design and making it pretty.

Check out the setup in action after the jump!

Continue reading “Hey OEMs, Arduino Controlled Dishwasher Has Much Potential” →

Dishwasher Notifier For The Absent-minded

April 12, 2011 by 28 Comments

dish_o_tron_6000

[Quinn] over at BlondiHacks is admittedly pretty absent-minded when it comes to household chores such as emptying the dishwasher. She often can’t remember if the dishes are dirty or ready to be put away, so she decided it was time to devise a mechanism that would help keep her on task. She originally considered a double-sided sign that said “Clean” on one side, “Dirty” on the other, but she chose the fun option and decided to over-engineer the problem instead.

She ultimately focused on two conditions that she needed to monitor: when the dishwasher had been run, and when the dishes have been emptied. To tackle the first condition, she used a thermistor to detect when the door of the dishwasher got hot from the wash cycle. The second wasn’t quite as easy, since she often peeks into the dishwasher to grab a clean dish when needed, unloading the rest later. She eventually settled on using a tilt switch to monitor the angle of the door, assuming that the dishes have been removed if the door was open for over a minute.

[Quinn] reports that her Dish-o-Tron 6000 works well, and she had a good time building it. Sure the whole thing is kind of overkill, but where’s the fun in moderation?

Using Makerbot For Dishwasher Repair

August 5, 2010 by 30 Comments

[Daryll Strauss’] dishwasher had some problems that he traced to a worn out part on the upper spinning arm. The hackerspace he belongs to has a Makerbot and he though this would be the perfect opportunity to print his own replacement part. He picked up some inexpensive digital calipers and set to work mapping out the dimensions of the broken piece. He took his hand-drawn cross section and built a replica part in Blender. Once he had it just right he generated the g-code and printed the part. His replacement works very well, and it’s a bit thicker (by design) than the original so hopefully that means it will hold up longer.

Hackaday Berlin Was Bonkers

March 27, 2023 by 11 Comments

In celebration of the tenth running of the Hackaday Prize, we had a fantastic weekend event in Berlin. This was a great opportunity for all of the European Hackaday community to get together for a few days of great talks, fun show-and-tells, and above all good old fashioned sitting together and brainstorming. Of course there was the badge, and the location – a gigantic hackerspace in Berlin called MotionLab – even had a monstrous laser-eye octopus suspended from a gantry overhead. Everyone who came brought something to share or to show. You couldn’t ask for more.

Unfortunately, we weren’t able to record the talks, so we’ll run down the highlights for you here. [Jenny List] is writing up a bunch of the badge hacks as we speak, so we’ll skip that for now. For the full experience, you just had to be there, but we’ll share with you what pictures we got. Enjoy!

Continue reading “Hackaday Berlin Was Bonkers” →

Hackaday Berlin: First Round Of Talks

March 7, 2023 by 11 Comments

We’re super excited to announce the first round of speakers for Hackaday Berlin!  We’re set to convene on Friday night, March 24th for an evening warm up before the main show on Saturday, March 25. Featuring the triumphant return of Voja’s 4-bit badge, a crew of awesome speakers, lightning talks, workshops, music, food, badge hacking, and all the best of the Hackaday community, this will be a day to remember. And then we’ll chill out Sunday morning with a Bring-a-Hack brunch.

So without further ado: the first round of speakers!

Jiska Classen
Hacking Closed-Source: Reverse Engineering Real-World Products

Closed-source software is prevalent in our everyday lives, limiting our ability to understand how it works, which privacy implication it poses to the processed data, and addressing potential issues in time. Despite the growth of open-source movements, users often have no choice but to rely on closed-source solutions, e.g., for medical devices and IoT products. We’ll discuss key techniques to help you get started with reverse engineering. Hacking your own devices can be challenging, bricking a device is not uncommon, but so is celebrating the moments of a revived and modified device.

James Bruton
Being a Full-Time YouTuber

 

YouTube is my full-time job and has been for four years. I create STEM education content using everything from 3D printing, CNC, Welding, to Microcontrollers and Coding. Find out how I got started, how I make money, what goes on in the background, and what my future plans are. I’ll tell you how you can do it too!

Trammell Hudson
Hacking your dishwasher for cloudless appliances

Why does your dishwasher, laundry or coffee-pot need to talk to the cloud? In this presentation, Trammell Hudson shows how he reverse engineered the encrypted connections between Home Connect appliances and the Bosch-Siemens Cloud servers, and how you can control your own appliances with your self-hosted MQTT home automation system by extracting the devices’ authentication keys and connecting to their local websocket ports. No cloud required!

Bleeptrack
Oops, my project ended up in a museum

Parameterized design allows for the adaption of projects to different needs but can also change the aesthetic to a persons liking. Bleeptrack will walk you through the creation process and tools of her generative projects, talk about her experience manufacturing unique pieces and explains how to cope when your freshly finished project gets locked up in an art exhibition for a few months.

Ali Shtarbanov
Creating Hardware Development Platforms for Real-World Impact: FlowIO Platform

What does it really take do create and deploy a development platform for real-world impact? Why do we need development platforms and how can they democratize emerging fields and accelerate innovation? Why do most platform attempts fail and only very few succeed in terms of impact? I will discuss the key characteristics that any platform technology must have in order for it to be able to useful for diverse users. FlowIO was the winner of the 2021 Hackaday Grand Prize as well as over a dozen other engineering, research, and design awards.

Come join us!

You!

Whatever you’re up to.

We want you to bring your current project, world-changing ideas, or simply fun hacks for a 7-minute lightning talk!

 

Old Barcode Scanner Motherboards Live Again

September 21, 2022 by 1 Comment

Sometimes, hacking is just for the pleasure of diving into the secrets of old hardware. That was very much the case when [glitch] and a friend started hacking on some old Intel 8080 boards that had been living in the junk pile for too long.

The boards in question were motherboards from Identicon barcode scanners, running the Intel 8080 CPU. Hacking on the 8080 is a little different, with the ancient CPU requiring three separate voltages to run. However, with the power rails figured out and power applied, it was possible to get the old boards up and running.

The boards were first run with test ROMs which showed the 8080 CPU to be functional. The ROMs hosted a simple program which got the 8080 to spit out the word “HELO” on to an HP HDSP-2416 ASCII character display. From there, the barcode scanner boards were installed in a chassis and hooked up to a bigger Siemens character display, and the memory was mapped out.

The result was that [glitch] and co were able to largely reverse engineer the Identicon hardware, learning it was fairly similar to the Intel MCS-80 reference design of the era. They were able to get code running on the platform, access the RAM, and fit a larger 8-character display. However, without the original barcode scanner attachment, the boards weren’t able to return to their original duty.

As far as hacks go, it’s pretty old school. The boards don’t talk to Twitter, nor run the lights or help with the dishes. However, plenty of fun was had seeing if this old metal could be made to follow instructions once more. Hacking for the pleasure of it is always a good thing by our book!