A 3D-printed talking milk jug with a speech bubble that says 'glug'.

Talking Milk Jug Says Glug-Glug-Glug

August 25, 2024 by Kristina Panos 7 Comments

Children can be a great source of daily inspiration, especially when they are just beginning to speak in full sentences and starting to let their little personalities show.

[Franklinstein] has the cutest toddler, and she loves her toy espresso machine, especially the little milk carton that came with it. Well, one day, Daddy made a glug-glug sound that delighted her, and he was inspired to build an entirely new milk jug that would make that special sound whenever it was turned over.

In order to keep the build relatively simple, [Franklinstein] used a sound module with an SD card and a tilt switch to activate it. There’s not much else to the build, really — just the usual suspects like a boost converter, a charging module, and a speaker, of course. In case you couldn’t tell, the enclosure and the internal skid that the electronics assemble onto are 3D printed.

This is really cute, and [Franklinstein]’s daughter seems to love it. Everything is available, including some nice instructions if you want to make one of your own. Be sure to check out the neat build video after the break.

The things we do for kids. Seriously.

Continue reading “Talking Milk Jug Says Glug-Glug-Glug” →

Running Stock MS-DOS On A Modern ThinkPad

August 22, 2024 by Tom Nardi 32 Comments

It might seem like the days of MS-DOS were a lifetime ago because…well, they basically were. Version 6.22 of the venerable operating system, the last standalone release, came out back in 1994. That makes even the most recent version officially 30 years old. A lot has changed in the computing world since that time, so naturally trying to run such an ancient OS on even a half-way modern machine would be a waste of time. Right?

As it turns out, getting MS-DOS 6.22 running on a modern computer isn’t nearly as hard as you’d think. In fact, it works pretty much perfectly. Assuming, that is, you pick the right machine. [Yeo Kheng Meng] recently wrote in to share his experiments with running the final DOS release on his Intel-powered ThinkPad X13 from 2020, and the results are surprising to say the least.

To be clear, we’re not talking about some patched version of DOS here. There’s no emulator at work either. Granted [Yeo] did embrace a few modern conveniences, such as using a USB floppy drive emulator to load the disk images instead of fiddling with actual floppies, and installing DOS onto an external drive so as not to clobber his actual OS on the internal NVME drive. But other than that, the installation of DOS on the ThinkPad went along just as it would have in the 1990s.

Continue reading “Running Stock MS-DOS On A Modern ThinkPad” →

Hackaday Podcast Episode 284: Laser Fault Injection, Console Hacks, And Too Much Audio

August 16, 2024 by Dan Maloney 1 Comment

The summer doldrums are here, but that doesn’t mean that Elliot and Dan couldn’t sift through the week’s hack and find the real gems. It was an audio-rich week, with a nifty microsynth, music bounced off the moon, and everything you always wanted to know about Raspberry Pi audio but were afraid to ask. We looked into the mysteries of waveguides and found a math-free way to understand how they work, and looked at the way Mecanum wheels work in the most soothing way possible. We also each locked in on more classic hacks, Elliot with a look at a buffer overflow in Tony Hawks Pro Skater and Dan with fault injection user a low-(ish) cost laser setup. From Proxxon upgrades to an RC submarine to Arya’s portable router build, we’ve got plenty of material for your late summer listening pleasure.

Worried about attracting the Black Helicopters? Download the DRM-free MP3 and listen offline, just in case.

Continue reading “Hackaday Podcast Episode 284: Laser Fault Injection, Console Hacks, And Too Much Audio” →

Audio On Pi: Here Are Your Options

August 12, 2024 by Arya Voronova 36 Comments

There are a ton of fun Raspberry Pi and Linux projects that require audio output – music players, talking robots, game consoles and arcades, intelligent assistants, mesh network walkie-talkies, and much more! There’s no shortage of Pi-based iPods out there, and my humble opinion is that we still could use more of them.

To help you in figuring out your projects, let’s talk about all the ways you can use to get audio out of a Pi or a similar SBC. Not all of them are immediately obvious and you ought to know the ropes before you implement one of them and get unpleasantly surprised by a problem you didn’t foresee. I can count at least five ways, and they don’t even include a GPIO-connected buzzer!

Let’s rank the different audio output methods, zoning in on things like their power consumption, and sort them by ease of implementation, and we’ll talk a bit about audio input options while we’re at it.

Continue reading “Audio On Pi: Here Are Your Options” →

Hackaday Podcast Episode 281: Metal Clay, Desiccants, Silica Gel, And Keeping Filament Dry

July 26, 2024 by Kristina Panos 2 Comments

This week on the Podcast, it’s Kristina’s turn to bloviate alongside Editor-in-Chief Elliot Williams. First up in the news: our fresh new contest has drawn three entries already! That’s right, the 2024 Tiny Games Challenge is underway. You have until September 10th to show us your best tiny game, whether that means tiny hardware, tiny code, or a tiny BOM.

Then it’s on to What’s That Sound, which sounded familiar to Kristina, but she couldn’t place it. Can you get it? Can you figure it out? Can you guess what’s making that sound? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt.

Then it’s on to the hacks, beginning with a hack to print metal and a way to weld wood, along with a photo-resistor-based, single-pixel camera. We’ll talk desiccants carbon fiber, and Baron Harkonnen. Finally, we discuss the troubles of keeping hygroscopic materials from degrading, and have a klatch about Keebin’ with Kristina.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download and savor at your leisure.

Continue reading “Hackaday Podcast Episode 281: Metal Clay, Desiccants, Silica Gel, And Keeping Filament Dry” →

Hackaday Podcast Episode 280: TV Tubes As Amplifiers, Smart Tech In Sportsballs, And Adrian Gives Us The Fingie

July 19, 2024 by Dan Maloney 3 Comments

Despite the summer doldrums, it was another big week in the hacking world, and Elliot sat down with Dan for a rundown. Come along for the ride as Dan betrays his total ignorance of soccer/football, much to Elliot’s amusement. But it’s all about keeping the human factor in sports, so we suppose it was worth it. Less controversially, we ogled over a display of PCB repair heroics, analyzed a reverse engineering effort that got really lucky, and took a look at an adorable one-transistor ham transceiver. We also talked about ants doing surgery, picking locks with nitric acid, a damn cute dam, and how to build one of the world’s largest machines from scratch in under a century. Plus, we answered the burning question: can a CRT be used as an audio amplifier? Yes, kind of, but please don’t let the audiophiles know or we’ll never hear the end of it.

Worried about attracting the Black Helicopters? Download the DRM-free MP3 and listen offline, just in case.

Continue reading “Hackaday Podcast Episode 280: TV Tubes As Amplifiers, Smart Tech In Sportsballs, And Adrian Gives Us The Fingie” →

Hackaday Podcast Episode 279: Solar Flares, Flash Cells, And Free Airline WiFi

July 12, 2024 by Al Williams 1 Comment

Get your weekly fix of great hacks with your guides, Elliot Williams and Al Williams. This week, the guys talk about hacking airline WiFi, vanishing cloud services, and hobbies adjacent to hacking, such as general aviation. Things go into the weird and wonderful when the topic turns to cavity filters, driving LEDs with a candle, and thermite.

Quick hacks? Everything from vintage automated telescopes to home fusion reactors and ham radio mobile from a bicycle. Then there’s the can’t miss articles about the Solar Dynamics Observatory and an explainer about flash memory technology.

Check out the links below and leave your favorite hack of the week in the comments below!

As always, this week’s episode is freeze-dried as an MP3 for your convenience.