The Styharp, An Instrument Modeled After A Pig Sty

This is a first for us. We’ve never heard of an instrument modeled after a pig sty before. The Styharp, built by [Yann Seznec], for [Matthew Herbert] is meant to be a mix between performance and visual art. [Matthew]’s followed a pig from birth to the plate and made an album from the sounds he recorded. The project is called “one pig”. This would explain the reason behind modeling an instrument after a sty.

[Yann] started with a Gametrak controller, basically a reel of line connected to a potentiometer. He ended up using 12 of these, which each have 3 outputs. This gave him plenty of ways change the sound during the performance. You can see a little bit of him demoing it after the break.

Continue reading “The Styharp, An Instrument Modeled After A Pig Sty”

Reading Wax Cylinders With Lasers

From 1902 to 1905, Polish anthropologist [Bronislow Pilsudski] did a series of recordings in Hokkaido japan on wax cylinders. Researchers at the university of Hokkaido have been working on ways to read the cylinders without causing any further damage to the grooves. Their preferred method has been to use reflected laser light. They have a very short writeup on their configuration, but it should be enough to get the idea.

Another project they’ve taken on is reading the original molds as well. They had to completely reconfigure their device to be able to be inserted into the cylinder. The quality they get from those is far superior though.

 

[Jeri] Builds A C64 Bass Keytar

[Jeri] built this really cool C64 bass Keytar from a commodore64 and a cheap bass guitar. She’s using an FPGA to do the string detection and the key scanning, it then sends everything to the original 8bit sound chips. The reason that she is using a bass guitar is that the commodore sound chip only has 3 channels. There’s an interview with her from the maker faire, and if you keep watching, there are some other interesting projects too.

She notes that the implementation she went with has many performance issues due to the overtones the strings create when played. If she did it again, she’d go another route. Since [Jeri] has previously created the fully functional C64 games on FPGA, maybe she’ll add some video synth to this down the road.

A New Method For Adding Audio Input To A Sansa Clip+

The Sansa Clip+ is a nice little MP3 player and recorder. But it doesn’t offer an input connector, instead relying on the built-in microphone. [Simon Frank] wanted to extend its functionality so he figured out how to add a standard audio jack for analog input.

This is not the first time this has been done, but [Simon] has found a different method of accomplishing the task at hand. The other external input hack we saw cannibalized the internal microphone, rerouting its connections as an external input. But the method seen here keeps that microphone intact. The device includes an FM radio chip which is attached to an ADC on one of the devices other integrated circuits. [Simon] just patched into those signals. Now all he has to do is set up the device to record from the radio and connect his source to the jack which he epoxied to the base of the enclosure.

Hackaday Links May 9th 2012

Homecut – CNC Cutting Directory

homecut

So you have a CNC machine that you use as a hobby, but would like to do some actual work on the side? Or maybe you have an idea you’d like made. Homecut is a map directory where you can maybe hook up with the right person.

The Curta Mechanical Calculator

curta calculator

As [leehart] mentioned in our comments section, the Curta mechanical calculator is a truly ingenious piece of engineering. A quick Google search should find all kinds of information on it, but this article could be a good place to start for some mechanical hacking inspiration!

Luxman Amplifier DAC Upgrade

nand-dac

[R. Barrios] wasn’t happy with using the sound card for his HTPC setup, so decided to add a DAC module onto his reciever. The resulting audio quality was very good, and the build came out quite clean.  Check it out if you’re thinking of a hack-upgrade to your stereo equipment.

3D Printable Tilt-Shift Adapter

tilt-shift-lens

A tilt-shift lens a neat piece of equipment that is used to make a large scene look like they were miniatures. It’s a cool effect, but professional lenses to do this can cost thousands of dollars. This Instructable tells you how to go about printing your own. For more info on the technique itself, check out this Wikipedia article.

New 3D Printer on the Block

3d-printer

If you would like to take the plunge into 3D printing, but are looking for somewhere to get a parts kit, the [ORD Bot Hadron 3D Printer] may be worth a look.  The build quality looks great, and the price for the mechanical components is quite reasonable at $399. You’ll need to provide the electronics and extruder. Thanks [comptechgeek]!

Simple Mod To Keep Your Downstairs Neighbors From Hearing You Pound The Keys

[Mesoiam] managed to pick up a Viscount hammer weighted keyboard for pretty cheap. For those who are unfamiliar, Viscount makes keyboards that feel like you’re playing a piano, hammers and all. The only problem with this, as [Mesoiam] discovered, is that even when he’s jamming with headphones in, his friends down stairs can still hear the keyboard banging due to the vibration going through the stand to the floor. His resolution to this problem was to build some custom dampers to reduce the vibration. He built two brackets that fit over the stand and suspend the keyboard on two strips of flexible rubber. Quite a simple solution to a possibly annoying problem.

Playing The Song “Still Alive” On Hacked Exercise Equipment

Back in 2009, [Evi1wombat] pulled of this interesting hack, and it has slowly made its way through the internet to find us today. He obtained the computer from a recently deceased treadmill and decided to hack into it. Finding himself unable to flash the existing chip, he yanked it out and replaced it with something he was more familiar with, a dsPIC30F4011. Unfortunately we don’t have any pics of the inside, but he says that he had some fun with wire because the pin mapping wasn’t exactly the same. [Evi1wombat] also gained some respect for the original designer judging by  this quote from the source code:

* Damn, the dude who designed that board pulled
* some pretty nifty tricks… took a while to
* get all the drivers working.

Of course, once you have control over some nifty new hardware, the first logical thing to do on it is play “Still Alive” from the game Portal.

Enjoy the video after the break.
Continue reading “Playing The Song “Still Alive” On Hacked Exercise Equipment”