The Rotary Cell Phone

It’s happened. It’s finally happened. In a move that has hipsters donning their good flannel and breaking out that case of Genesee they were saving for a special occasion, the rotary cell phone is now a reality.

[Jaromir] created this astonishingly retro future device as an entry for the NXP LPC810 challenge, a contest to do the most with an ARM Cortex M0+ microcontroller in an 8-pin package. Having only six I/O pins for controlling a GSM module, display a few buttons, and the fancy rotary dial meant [Jaromir] needed to expand his I/O some way. He chose a shift register to handle the buttons and display in a somewhat impressive demonstration of using a shift register as both an input and output expander at the same time.

From the videos [Jaromir] uploaded, the rotary cell phone isn’t ready for Think Geek to do a production run quite yet. He needs to enter the PIN for the SIM card, AT commands for the GSM module, and is, of course, a horrible method of user input for the younglings who have only seen rotary phones in old movies. That being said, it’s a rotary cell phone running on an 8-pin microcontroller. What more do you want?

Videos of this awesome this truly awesome phone in action below. If you’d like to build your own – and why wouldn’t you – all the files are available on [Jaromir]’s git

Continue reading “The Rotary Cell Phone”

USB-ify Your Old Cell Phone Chargers

phoneChargerUSBd

If you’re like us, you probably have a box (or more) of wall warts lurking in a closet or on a shelf somewhere. Depending on how long you’ve been collecting cell phones, that box is likely overflowing with 5V chargers: all with different connectors. Bring them back to life by doing what [Martin Melchior] did: chop off the ends and solder on a bunch of USB jacks.

You’ll want to use chargers rated for at least 500mA (if not 1A) for this project, or you may be wasting your time considering how much current devices pull these days. Get your polarity right, solder on a USB jack, and you’re finished. Sure, it’s a no-brainer kind of project, but it can clean out some of your closet and give you a charging station for every room of your home and the office. [Martin] glued the USB jack directly onto the adapters, so there are no tangled cords to worry about. iPhone users will need to do the usual kungfu if you want your Apple device to charge.

Hackaday Links: December 1, 2013

hackaday-links-chain

Since our ‘ol buddy [Caleb] left Hackaday for EE Times, he’s been very busy. One of his latest projects is doing Antique Electronics Autopsies. This time around it’s a 1953 Heathkit Grid Dip Meter. It’s a beautiful piece of engineering with Point to Point wiring and metal gears.

We love microcontroller breakout boards, and so does [Tim] apparently. He built a breadboard friendly breakout for the NXP LPC812. It’s an ARM Cortex M0+ with 16kb of Flash and 4kb of SRAM. The entire breakout board is smaller than the through-hole DIP LPC1114. When are we going to see these on Tindie, [Tim]? Here’s the Git with the board files. You can also pick up a board at OSH Park – $3.30 for a set of three.

What do you do when you have the perfect idea for a Kickstarter, but don’t have the funds for the perfect sales pitch? The obvious solution is to start an Indiegogo campaign to raise funds for your Kickstarter. Unfortunately, this campaign has already been successfully funded, so it’s already too late to get in on the ground floor. Relevant xkcd.

We’ve seen this DIY cell phone before but now it’s just about ready for production. [David] at the MIT Media Lab has been working on a bare-bones, ATMega & GSM module phone for a while now, and now you can grab the firmware and board files. Make your own cell phone!

Here comes Hanukkah, so drink your gin and tonica. Here’s a pedal powered menorahica so put on your yarmulke, it’s time to celebrate Hanukkah.

Supercap-Based Cell Phone Charger

Screen Shot 2013-11-02 at 11.21.58 AM[Barry] sent us a tip about a video from [electronupdate], describing an experimental cell phone charger. It’s a familiar issue: Your cell phone battery is low, and you aren’t in a position to plug it in for hours to charge. Some phones, including the one in his video, have swappable batteries, but that isn’t always an option either. As he explains in the video, a wall outlet can deliver the joule capacity of a high-end battery in a matter of seconds, but it is impossible to charge a battery that quickly. Capacitors, on the other hand, charge near-instantly.

[electronupdate] decided to look at the possibility of using super capacitors to power a typical usb plug. It would allow you to charge a secondary power supply in a short period of time, and then get on your way, letting your phone charge slowly from the device.

His experiment wasn’t entirely successful, possibly because he used 2.7V capacitors, which required a boost regulator and limited the useful voltage range. We think he might have had better success using 120V capacitors and a switching power supply, but it would be nice to see the various options compared.

Oh, [electronupdate] describes using this circuit as you are rushing to your airplane. We aren’t convinced carrying a couple super capacitors through a TSA checkpoint would be the best idea… YMMV.

Continue reading “Supercap-Based Cell Phone Charger”

Ask Hackaday: Does Project Ara Solve The Phonebloks’ Problems?

Our tips line is blowing up again, this time directing us to Motorola’s Project Ara: a phone with modular components that plug into a base “endoskeleton.” If you missed the news coverage strewn across the web and you are doing a double-take, that’s because Project Ara is frighteningly similar to the (presumed vaporware) Phonebloks concept from a few weeks ago. Phonebloks was the subject of our last “Ask Hackaday” article, generating hundreds of comments ranging from those defending the concept to those furiously opposed to it.

There’s a conspiracy theory circulating that suggests Motorola released the Phonebloks concept as a viral marketing scheme to generate hype before revealing the official product line. We suspect it’s a bit less conniving. As [jorde] explained on Hacker News, an Israeli startup, Modu, had developed a similar modular cell phone several years ago, and Google bought the patents in May of 2011. A few months later, Google bought something else: Motorola. It seems likely that Project Ara is merely a resurrected and revised Modu, and Motorola conveniently announced it in the wake of Phonebloks’ popularity. Regardless, Motorola has announced that they have partnered with Phonebloks’ creator Dave Hakkens .

So what’s different? Phonebloks was met with cries of “vaporware!” and fervent arguments raising concerns about unavoidable hardware limitations. Motorola claims their goal is:

to do for hardware what the Android platform has done for software: create a vibrant third-party developer ecosystem, lower the barriers to entry, increase the pace of innovation, and substantially compress development timelines.

Unlike Project Ara, Phonebloks didn’t consider open-source hardware (Wayback Machine link), and Motorola makes an interesting argument here: that advances in 3D printing indicate an evolving “open hardware ecosystem,” and the next era of phone development may rest in the hands of your average hacker or a small startup company. Some speculate that the Ara will be similar to the relationship between a PC and its peripherals: Motorola provides the essential guts while giving you some slots for attaching additional components. Let us know in the comments what you think about Project Ara: is it just more vaporware, or a watered-down but plausible alternative to Phonebloks?  And, perhaps most important: do you, as a hacker, want a phone that supports open hardware and lets you plug in “peripherals?” The Phonebloks website has since changed to reflect the partnership with Motorola, and includes a new video that you can watch below.

Continue reading “Ask Hackaday: Does Project Ara Solve The Phonebloks’ Problems?”

Human Powered Emergency Cell Phone Charger

Emergency-human-powered-cell-phone-charger

Power outage? For the average citizen it’s very easy to take electricity for granted. Go a few hours or more without it though, and you’ll suddenly be reminded just what a luxury it is. During an emergency situation, sometimes you have to come up with alternative methods to get the job done. This human powered cell phone charger is a great example.

Using just a few ordinary around the house items, [The King of Random] turned a cordless electric drill into a human powered electrical generator. If the drill is run in reverse and cranked by hand, the generated energy can be transferred through the battery terminals to a connected device.  So, he cut a USB charger cable in half and wired it up to the terminals to be able to charge his cell phone. Some yarn, a salad fork, a mixing beater, a scrap 2″x4″, some aluminum foil, and scotch tape were the only other materials he used. Using this technique, a totally dead phone battery was charged in around 3 hours.

Remember that this method is only intended to be used in an emergency, not as every day practice. Using these methods could potentially overheat or damage your gear, so be careful.

Check out the MacGyver worthy video tutorial after the break.

[via Neatorama]

Continue reading “Human Powered Emergency Cell Phone Charger”

Bringing The Zach Morris Phone Into The 21st Century

DSCF7247

With the gravitas of [Michael Douglas] in Wall Street and the technological amazement of [Zach Morris] on Saved By The Bell, the classic 1980s ‘brick’ cell phone has a lot to offer these days. Not only is it large enough to be used as a blunt weapon, it’s also useful as an anchor and more durable than an old-school Nokia. Most, if not all of these phones have gone silent since analog cellular service went dead a few years ago, but that didn’t stop [Andrew] from bringing his back to life.

The core of this build is a 128×64 OLED screen that replaced the old seven-digit, seven-segment display and a very small GSM module. The ancient PCB was discarded and a new hardware revision was created in Eagle based on an Arduino-powered microcontroller. The buttons from the original phone remained, thanks to a custom designed resistive button footprint on the PCB and a bit of conductive ink.

What’s surprising is this phone actually works. [Andrew] can not only receive texts on his phone, but also send them using his own implementation of a number pad keyboard. It’s an awesome build, and from what we can tell, the first proper DIY cell phone we’ve ever seen. About time someone got around to that, and we couldn’t have hoped for a better form factor.