Hackaday Links: December 7, 2014

December 7, 2014 by Brian Benchoff 53 Comments

Have some .40 cal shell casings sitting around with nothing to do? How about some bullet earbuds? If you’ve ever wondered about the DIY community over at imgur, the top comment, by a large margin, is, “All of these tools would cost so much more than just buying the headphones”

Here’s something [Lewin] sent in. It’s a USB cable, with a type A connector on one end, and a type A connector on the other end. There is no circuitry anywhere in this cable. This is prohibited by the USB Implementors Forum, so if you have any idea what this thing is for, drop a note in the comments.

Attention interesting people in Boston. There’s a lecture series this Tuesday on Artificial Consciousness and Revolutionizing Medical Device Design. This is part two in a series that Hackaday writer [Gregory L. Charvat] has been working with. Talks include mixed signal ASIC design, and artificial consciousness as a state of matter. Free event, open bar, and you get to meet (other) interesting people.

Ghostbusters. It’s the 30th anniversary, and to celebrate the event [Luca] is making a custom collectors edition with the BluRay and something very special: the Lego ECTO-1.

Let’s say you need to store the number of days in each month in a program somewhere. You could look it up in the Time Zone Database, but that’s far too easy. How about a lookup table, or just a freakin’ array with 12 entries? What is this, amateur hour? No, the proper way of remembering the number of days in each month is some bizarre piece-wise function. It is: f(x) = 28 + (x + ⌊^x⁄₈⌋) mod 2 + 2 mod x + 2 ⌊¹⁄_x⌋. At least the comments are interesting.

Arduinos were sold in the 70s! Shocking, yes, but don’t worry, time travel was involved. Here’s a still from Predestination, in theatres Jan 9, rated R, hail corporate.

Hackaday Links: November 2, 2014

November 2, 2014 by Brian Benchoff 16 Comments

Russians blowing up capacitors! As we all know, electronics only work because of blue smoke. [kreosan] is releasing this blue smoke from a few hundred caps. Fun times, even if they are a large number of inert tube shields in their collection of caps.

[mayhugh1] over on the home model engine machinist forum has built an 18 cylinder radial engine. It’s based on the Hodgson 9-cylinder radial engine that has been around for a while. The crank case is machined from a 5″ diameter rod of aluminum. There’s a Picassa album of the engine being constructed as well.

[Richard] wanted a Minecraft server, but not just any Minecraft server; this one demanded a custom case. A grass block was the inspiration, acrylic the medium, and a quad-core Mini-ITX the guts of the project.

Halloween was last Friday, and as always the tip line filled up with costume builds. [Leif] built a Ghostbusters costume complete with Muon trap, [Jeff] printed out some ~~steampunk~~ post-apocolyptic goggles, and [Green Gentleman] made a death-a-corn, although we’re struggling to figure out why the last one isn’t called an acorn-‘o-lantern.

[Matthias Wandel], a.k.a. the woodgears.ca dude, is well-known in certain circles for being a wizard of wood. One of the first projects that put him on the map was a pantorouter – a router to cut mortises and tenons. He’s going back to his roots and building a bigger version. This version uses models of routers that are available outside North America, and in the latest video [Matthias] has it dialed in very well.

The Open Source Remote Control was an entry for The Hackaday Prize that didn’t make the final cut. It’s now an indiegogo project, and has some really cool tech we can’t wait to see in mainstream RC transmitters.

Singing Pumpkins

October 15, 2012 by Mike Szczys 6 Comments

This Halloween table will sing a sweet serenade to spook your guests. Each of the animatronic pumpkins were quite easy to build, but you may end up spending a bit more time choreographing the performance.

Inside each Jack-o-lantern you’ll find a custom Arduino compatible board called a Minion board. These include a wireless connection which lets the system sync with the computer playing the audio. The pumpkins are fake, which means that can be reused year after year (unlike our LED matrix inside a real pumpkin). The mouth is connected to a servo with a short piece of bent wire, allowing it to flap along with the words of a song. You can see a performance of the Ghostbusters theme in the clip after the break.

A custom GUI was written in C# to aid in the choreography. It handles the playback of the song, with a few buttons that can be used to record the light and mouth effects. This ‘recording’ is then used to drive the pumpkins during a performance.

Continue reading “Singing Pumpkins” →

[Vigo’s] Stare Follows You Wherever You Go

October 27, 2011 by Mike Szczys 20 Comments

To decorate the office for Halloween [Eric] decided to make [Vigo the Carpathian] stare at passersby. We hope that readers recognize this image, but for those younger hackers who don’t, this painting of [Vigo] played an important part in the classic film Ghostbusters II.

In the movie, his eyes appeared to be following anyone looking at the painting. [Eric] grabbed a Kinect and used Processing to recreate the effect in real life. The image is displayed on an LCD screen. A bit of work with Photoshop allowed him to cut out the eyes from the image, then create sprites which are moved by the Processing sketch. It’s reading data from the Kinect (so it knows where to ‘look’) which you can see perched on the top of the cubicle wall. The illusion is delightful, see for yourself in the clip after the break. We’ve already watched it a half-dozen times, and it looks like it was a real hit with the guests at the open house.

Can you believe they threw this together in just one day?

Continue reading “[Vigo’s] Stare Follows You Wherever You Go” →