Month: January 2009

Automated Shooting Range

January 22, 2009 by 28 Comments

targets

[Steve] was discussing airsoft with a friend when he came up with this idea. His friend was lamenting the lack of “action” style targets for their airsoft hobby. [Steve] took this as an opportunity to make his own automated target system. The targets themselves are made from Construx, a paper target and a piece of cloth to stop the airsoft pellets. Controlled by an Arduino and an ioBridge module, it has a web interface so he can switch programs from up range. You can see a video example of him shooting some targets after the break. Next,he should make it twitter where each target was hit.

Continue reading “Automated Shooting Range” →

Hackit: DTV Converter Boxes?

January 21, 2009 by 63 Comments

zenith

An anonymous Slashdot reader asked today what was the best digital television to analog converter box. He was looking for one with the best hacking potential. We actually purchased a Zenith DTT900 HD converter box this summer specifically wondering about the hacking potential. We did a teardown and you can find a full gallery on Flickr. Our conclusion was this: there’s not much there. You’re talking about a box that takes a digital RF signal and turns it into a crappier looking analog signal over composite. There isn’t much you can do outside of its designed use. Do you have any ideas what else can be done with it?

Slashdot commenter [timeOday] did mention a Tivax brand box that features a serial port. You can use it to issue remote commands to the box.

Not much has been said about the actual coupons. We’ve got a scan of them embedded below. The $40 coupons are essentially credit cards. We ran ours through a magstripe reader confirming this. Even though the card isn’t stamped with the recipient’s name, it is stored on the magstripe.

Continue reading “Hackit: DTV Converter Boxes?” →

Meggy Serial Cable

January 21, 2009 by 6 Comments

meggy

We thought the Meggy had some serious potential. The open serial port is ripe for the plucking, but has thus far been fairly unused. Here’s directions on how to make your own serial cable capable of connecting two Meggies. Basically, it is just modifying an audio cable, used to connect CDROMs to the motherboard. The cool thing about this is that the resulting crossover cable should work on any Arduino that is programmed via an FTDI cable.

External Antenna On Panasonic CF-R1

January 21, 2009 by 15 Comments

ext_ant

[Steven] managed to get his hands on a Panasonic CF-R1 for pretty cheap. Though it is a decently powerful machine, it was built in 2002 and didn’t come with an internal wireless card.  It did, however have a mini-PCI slot.  [Steven] promptly installed a wireless card, but found the internal antenna lacking. The solution was to custom mount an external antenna. Mounting it was fairly easy, he removed the phone jack and epoxied the connector in its place. The reception was greatly improved. He says he went from seeing 6 access points to 31 as soon as he installed it. Similar things have been done to the Eee PC 900.

Chumby Digital Picture Frame Teardown

January 20, 2009 by 27 Comments

overview-1

At this year’s Consumer Electronics Show, Chumby unveiled their latest prototype. It’s a network connected digital picture frame that runs Flash widgets. Just like the current Chumby model, they’re publishing the software and hardware under a license designed to let you hack it. They let us borrow one of their open chassis evaluation kits to teardown and photograph. We’ve got more pictures, full specs, and the schematics below.

Continue reading “Chumby Digital Picture Frame Teardown” →

Passive MIDI Foot Switch

January 20, 2009 by 12 Comments

foot

[Matt] was looking into some software that allows him to use his audio card as a means to control analog audio devices. After seeing how it worked, he got an idea to try to do the opposite.  He is sending a signal into his audio input, and piping it to a pice of MIDI software. The input he has chose is a foot switch. To create the signal, he simply needed to supply voltage while the switch was depressed. You can see above that he used a battery and a simple contact switch to send the signal. He then piped it to a virtual MIDI port using Maple Virtual MIDI Cable. Unfortunately, this isn’t suitable for knobs, but that may be next on his list.