Small-Scale Projects Use Snail-Mail Mail-Scale

April 26, 2014 by Rich Bremer 12 Comments

stamps.com scale

Stamps.com offers a free USB scale when you sign up for their service. The first versions of this scale did not have a display. In order to find the weight of an object the scale had to be connected to a computer running the stamps.com software. If you happen to have one of these old scales or are able to pick one up cheap, you may be interested in using it outside of the stamps.com service. There are several options on how to do that.

Continue reading “Small-Scale Projects Use Snail-Mail Mail-Scale” →

DIY Multimeter, Arduino Sold Seperately

April 24, 2014 by Rich Bremer 24 Comments

Arduino-based Multimeter

You can’t argue that Arduinos are extremely popular with the maker/hacker community. Some would say that there is certainly no shortage of projects to make using them. [Milen] thought otherwise and felt it was time to create an Arduino-based multimeter.

At the heart of this project is a common Arduino Uno. The additional parts were kept to a minimum in order to keep down the overall cost and project complexity. The finished product can measure voltage from 0-100v, amperage up to 500mA and resistance between 0-250 kohm. If you need to check for continuity, it can do that too.

All of the parts required to make the multimeter fit on a shield that plugs directly into the Arduino. Banana plugs allow for attaching test leads. The measurement values are displayed on an LCD screen and/or (if connected) to the Arduino IDE Serial Monitor. If only using the serial monitor, the LCD screen can be omitted to save a few bucks.

Continue reading “DIY Multimeter, Arduino Sold Seperately” →

Genetic Engineering Produces Desk/Computer Hybrid

April 19, 2014 by Rich Bremer 26 Comments

Desk Holds Computer Internally

Computers and Desks go together like peanut butter and jelly. After many years of modding computer cases with windows, lights and the like, [Cameron] decided it was time to try something new and combine his next custom case with a desk.

The main desk is from Ikea. The computer case portion is made from wood. No one wants to lose leg room, this case was made to be shallow and wide so it would be out of the way when bolted underneath the desk’s work surface. If any serious maintenance has to be done the case can be easily unbolted and lowered for easy access. Speaker grill cloth is used on the front of the case for 2 reasons; hide the case and keep out the dust.

Continue reading “Genetic Engineering Produces Desk/Computer Hybrid” →

Awww Shoot! My Spool Doesn’t Fit My Holder

April 17, 2014 by Rich Bremer 38 Comments

spoolholder-main

The great thing about standards is that there are so many to choose from. Filament spools certainly do not deviate far from this sarcastic saying. So what are we 3D Printer folks to do? Here are a couple completely different DIY options:

[Mark] made a spool holder that can accept 2 different width spools. This design uses skate bearings to support the spool on two points at each end. There are 3 sets of bearing blocks to accommodate the 2 different width spools. When either size spool is installed, one of the bearing block sets goes unused.

Continue reading “Awww Shoot! My Spool Doesn’t Fit My Holder” →

This Is Not Your Father’s Power Wheel

April 12, 2014 by Rich Bremer 36 Comments

If you had a Power Wheel vehicle as a kid you may have been the envy of the neighborhood. Even as fun as they were you probably out grew them. Lucky for a few youngsters, [Bob] hasn’t. Not only does he have several Power Wheels for his children to use, he does some pretty cool mods to make them even more fun.

Changing the stock motor out for a cordless drill is one of the first things that gets done. A few brands have been used but the Ryobi 18v Cordless Drill is the favorite. The entire drill is used, including the reduction gearbox. The gearbox is switched to LOW gearing so that the drill has enough torque to move the combined weight of the vehicle and child. As much as it may sound odd to use a drill in this manner, the Power Wheel can get up to about 15 mph. A stock Power Wheels maxes out at 5 mph

Continue reading “This Is Not Your Father’s Power Wheel” →

Multijoy_Retro Connects Your ‘Wayback’ To Your ‘Machine’

April 7, 2014 by Rich Bremer 23 Comments

flight-finished

Moore’s law is the observation that, over the history of computing hardware, the number of transistors on integrated circuits doubles approximately every two years. This rapid advancement is certainly great for computing power and the advent of better technology but it does have one drawback; otherwise great working hardware becomes outdated and unusable. [Dave] likes his flight simulators and his old flight sim equipment. The only problem is that his new-fangled computer doesn’t have DA15 or DE9 inputs to interface with his controllers. Not being one to let something like this get him down, [Dave] set out to build his own microcontroller-based interface module. He calls it the Multijoy_Retro.

Continue reading “Multijoy_Retro Connects Your ‘Wayback’ To Your ‘Machine’” →

Bike Pedals In Both Directions, Gets You To Your Destination AND Back

April 5, 2014 by Rich Bremer 48 Comments

[punamenon2] has built an interesting bike that moves forward regardless if it is pedaled forward or backwards! What? Yes, you read that correctly. Pedal forward or backwards and the bike goes forward. This project started off as any old cruiser with a free-wheeling rear hub. To pull off this mod a second free-wheel and sprocket had to be added to the current wheel assembly. One free-wheel and sprocket set is used when pedaling forward, the other set is used when pedaling in reverse. There is also a new chain tensioner that serves to not only keep the chain taut but also allows for the chain to change directions which ultimately allows this novel idea to work.

Continue reading “Bike Pedals In Both Directions, Gets You To Your Destination AND Back” →