Author: James Hobson

1404 Articles

Lego Exoskeleton Mimics Pacific Rim

Lego Exoskeleton Controls Pacific Rim Robot

August 9, 2015 by 11 Comments

As hilariously outrageous as Pacific Rim was, it was still an awesome concept. Giant robot battle suits, duking it out with the aliens. Well, it looks as if it wasn’t quite as far-fetched as we first imagined. Maker [Danny Benedettelli] just released a video of his very own Lego exoskeleton suit that when worn can be used to control a desktop size Cyclops robot. You might remember [Danny] as the author of The Lego Mindstorms EV3 Library,

The Cyclops robot (also his design) was originally built four years ago using Lego Mindstorms NXT system with an Android phone running a custom app. Cyclops has been upgraded a bit for this demonstration. Now it communicates over Bluetooth with an Arduino to [Danny’s] telemetry suit.

Relatively speaking, the system is pretty simple. The Lego exoskeleton has potentiometers on each joint, which map to a degree of freedom for the robot. When one potentiometer spins, the associated robot joint mimics it. Simple, right?

Continue reading “Lego Exoskeleton Controls Pacific Rim Robot” →

Seven Segment Countdown Timer

Cute Countdown Timer Reminds You Of Impending Doom

August 5, 2015 by 8 Comments

As things get busy, whether it be an upcoming product launch, a pregnancy, or even the release of your favorite game (or movie!) sometimes it’s nice to have a little countdown timer. Not an app on your phone, but a tangible, physical timer to set on your desk. Which is why SevenSeg is such a cute idea.

[Mohit] wanted to design something that was simple, but aesthetically pleasing — he’d seen free-form electronic projects before and wanted to give it a shot. What he came up with is pretty elegant! A seven segment display is connected via 1/32″ brass rods to the controller, a Particle Photon — which is kind of like a Teensy with WiFi for the internet of things. After putting a few resistors in line with the display, and a bit of frustrating bending of wire later, and SevenSeg was complete.

Continue reading “Cute Countdown Timer Reminds You Of Impending Doom” →

Cooking an egg with a lightbulb

Cooking With Shop Tools: Most Dangerous Breakfast

August 4, 2015 by 10 Comments

In a rather comical video, [Dom] and [Chris] of [ExplosiveDischarge] show us how to make a full English breakfast — without the use of a kitchen.

We’re talking eggs, bacon, ham, hash browns, and baked beans. Without the use of a single cooking element. Some of the methods were expected, like using a clothes iron as a portable grill — which is a great life hack by the way, especially when you’re at a hotel and just happen to have a package of bacon and nowhere to cook it… Or using a blow torch to flame-broil a perfect sausage — with the clever use of a drill-powered rotisserie using a variable power supply to adjust the speed!

Continue reading “Cooking With Shop Tools: Most Dangerous Breakfast” →

Downloading Satellite Images Via FM Radio

August 2, 2015 by 63 Comments

Did you know weather satellites transmit their weather images over an FM frequency? And now that you know… You can intercept them yourself with a $10 FM radio dongle!

American NOAA weather satellites are in a polar orbit around earth, and each one will pass the same point approximately every 12 hours. When it is overhead, the signal is strong enough to receive. After [Matt] found out this tidbit of knowledge, he had to learn how to intercept the images himself.

The satellites transmit the images over the 137MHz band, and using a radio tuner USB dongle, you can record the transmission and then decode it into a picture. He used CubicSDR to tune and record the signal, and then Soundflower to pull out interference, and finally WXtoIMG — which starts recording when the satellite is above, and decodes the image.

[Thanks for the tip Amirgon!]

Sideways Segway!

The Self-Balancing Sideways Segway

August 1, 2015 by 13 Comments

[Jason Dorie] has been hard at work on his two-wheeled, self-balancing skateboard. He calls it the Sideway.

Similar to the Segway, it relies on the user shifting their weight to control the speed at which it will run. A Wii Nunchuk controller is used to steer, which varies each wheels output, which allows for some tight maneuvering!

Under the deck is a pair of 24V 280W (about 1/3HP each) scooter motors which are driven by two 32A Sabertooth speed controllers. They’re run off a pair of 3 cell 5Ah LiPos which get him about 40 minutes of use — not too shabby! To handle the control algorithm for the IMU, he’s using a Parallax Propeller with custom software.

To demonstrate, he takes us of a tour of one of his favorite stores — Michael’s.

Continue reading “The Self-Balancing Sideways Segway” →

3D Printed Bristle Bots (Robot Cockroaches!)

August 1, 2015 by 3 Comments

Bristlebots are one of our favorite projects to teach young hackers the basics of electronics. They’re easy to build, fun, and most importantly — cute. Usually you make them out of the head of an old toothbrush and a cellphone vibrating motor, but [Kevin Osborn] figured out a way to 3D print the entire thing!

He got the idea from [Mark Peeters] who figured out how to turn one of the disadvantages of FDM style printers, into a new way of producing more abstract 3D prints… He calls it the Drooloop method, and you can make some really cool 3D printed flowers with it! Basically, it means you design parts without support structures and design in a droop. If you do it right, you can create the bristles for your Bristlebot!

Continue reading “3D Printed Bristle Bots (Robot Cockroaches!)” →

Human Controlled Robot Arm

Human Gestures Control This Robot Arm

July 31, 2015 by 1 Comment

[Ray Kampmeier] just finished writing some code to allow him to control his robotic arm using force-sensitive hand gestures! He calls it the Robo Marionette.

He’s using a MeArm 4 DOF robotic arm, a Sensel touch interface, an Arduino Uno, and a servo shield for the Arduino to control the MeArm. All the code you need is available on his GitHub, but unfortunately the Sensel touch interface isn’t actually available to the public yet.

Continue reading “Human Gestures Control This Robot Arm” →