Heading To New York To Judge The RedBull Creation Contest!

June 13, 2013 by Caleb Kraft 7 Comments

We had a ridiculous amount of fun last year in the RedBull Creation Contest. This year, however, we’re not participating as competitors, we’re judging! I will be there representing Hackaday as a judge as well as getting behind the scenes coverage. Sometimes the best stuff gets missed when all you get is the highlight reel.

The format this year is returning to what it was in 2011. The 6 teams will meet in New York this weekend to compete in a 72 hour build off. I can’t wait to see what they’re going to come up with. You can see what each team did to get into this stage in the video above.

I’ll be recording video during the event so you can follow along. I’ll try really hard to give a real view of what an amazing event like this is like. I imagine it will be a whirlwind of activity, so I’ll do my best to capture it.

RedBull Creation Contest Entries Revealed!

May 8, 2013 by Caleb Kraft 19 Comments

The Redbull Creation contest is underway and the entries into the first stage have been submitted. As a judge, it is my duty to watch every single one of these and cast my vote on who should continue to round two. I won’t be sharing my vote with you, but I thought you might enjoy watching the entries yourself! Remember that the rules for this round were simply “build something amazing using this box full of cool stuff we sent you.”.

I have to say that the entrants really kicked things up a notch this year. These projects are so amazing that choosing 3 to be the “most awesome” is proving quite difficult. I’d also like to take yet another opportunity to mention that we think that this is such a wonderful method of promotion. RedBull could be making sappy commercials about polar bears drinking their beverage, but instead, they are encouraging people to make AWESOME things(yes, they have commercials too). Other companies should take note, like Oreo did!

You can view all the entries here.

Uzebox Coding Challenge

February 28, 2013 by Eric Evenchick 9 Comments

The 2013 Uzebox Coding Challenge is currently underway. This competition runs until June 1st, with registration open until April 1st. The Uzebox is an open source, 8 bit game console that uses only two chips: an ATmega644 microcontroller and a AD725 RGB to NTSC converter. We’ve featured it a few times in the past.

The competition rules are pretty loose: build a game or a useful piece of software that runs on the Uzebox, and fits in 61 kB. Entries will be judged on game play, originality, graphics, sound, completeness, and technical prowess. There’s prizes for the top six entries, including a few Uzeboxes and cash.

If you don’t have an Uzebox, check out the Uzem emulator. This lets you emulate the Uzebox hardware on Windows, Mac, or Linux. The emulator also has an internal GDB debug server to help with development. The low cost console can be built for about $30, and a number of kits are available.

Thanks to [Ben] for sending this in.

Watching 50 Teams Build Something Cool

February 23, 2013 by Brian Benchoff 5 Comments

Last summer, we here at Hackaday participated in the Red Bull Creation Contest. Basically, twelve teams were given webcams and instructions to build something cool. The teams live streamed their build process, and the best of the bunch won a trip to the New York Maker Faire. [Jason Naumoff], the guy behind this build-off is doing it again right now. It’s called The Deconstruction and it pits 50 teams on 6 continents to build something cool while streaming their project to the Internet.

The Deconstruction is a little bit different from Red Bull’s contest – first, the teams don’t have access to ludicrous amounts of energy drinks. Secondly, there’s no set theme for the group entries. It’s a free-for-all build off where teams can make anything they’d like.

We’ve really got to hand it to [Jason] for pulling this off. He MC’d the Red Bull Creation Contest live stream – nearly all 72 hours of it – and was entertaining right up to the very end. You can check out the official stream on the main Deconstruction site, or you can check out the individual team streams here.

Y Combinator And Upverter Host Hardware Hackathon

February 1, 2013 by Eric Evenchick 2 Comments

Startup accelerator Y Combinator and Upverter are joining forces to run a hardware hackathon. This event aims to encourage hardware hackers to get together and design new products in a twelve hour sprint. Startups including Pebble, Octopart, and Lockitron will also be participating.

It’s a free event, and the winning teams will get their design manufactured. Participants will retain the rights to their designs, get free professional Upverter accounts, and have the chance to chat with some of the Y Combinator partners. This makes it a great opportunity for people looking to create their own hardware startup.

The event takes place on February 23rd at the Y Combinator offices in Mountain View, CA. Registration is open until February 8th. If you’re in the Bay Area and do hardware, you should check this event out.

The Keypad Contest

January 31, 2013 by Eric Evenchick 11 Comments

What can you do with ten buttons and ten lights? A lot.

[Andrew] and [Nathan] found a collection of Hale Research keypads being thrown out, and decided to host the Keypad Contest. The goal of the contest was to create something nifty using the ten buttons and ten lights on the keypad, and an ATtiny2313 that replaced the original 8051-compatible microcontroller in the device.

[Andrew] wanted to try making PCBs with his home-built CNC machine, so he milled out USBtinyISP programmers for the ATtiny2313. Then he gave out eleven development kits to a group, and explained how to develop on the hardware.

After a month of hacking, seven people completed projects. The winner was an internet radio controller, which had the keypad sending serial data to a TP-Link WR703N router. The router used a USB sound card and OpenWRT firmware to stream music. The runner up was a timing game called “Capture”.

The contest write up has details on all seven projects. [Andrew] and [Nathan] were successful in getting software engineers to try hardware with this contest, resulting in some neat hacks. After the break, check out a video demo of the internet radio controller.

Continue reading “The Keypad Contest” →

Write Code, Fix The Space Station, Win $10,000

January 19, 2013 by Brian Benchoff 126 Comments

ISS

If you want something great to add to your astronaut application, this is your chance. If you can figure out a way to optimize the position of the solar panels for the International Space Station, you’ll win $10,000 from this TopCoder competition.

Positioning the solar arrays on the ISS is an incredibly complex task; if parts of the arrays are in the shadow of other parts, they’ll bend due to the temperature difference and eventually break. NASA would like more power to run science experiments and other cool stuff, so they’re turning to hackers so they can optimize the amount of power generated on the ISS.

Your goal, as a contestant in this completion, is to define the angular position and velocity for each of the joints that connect the solar panels to the station for every point in a 92-minute orbit. Limitations on any solution include making sure the masts for each panel aren’t in a shadow more than they need to be, making sure the cycle can be repeated each orbit, and making sure the most power is generated on board.

The completion is open, so if you haven’t done enough matrix algebra this weekend feel free to sign up. In any event, you’ll get a cool CAD model of the ISS.